H3C NSQ1GT48EA0 Bedienungsanleitung

Manual Version: 6PW104-20170414 BOM: 3123A0R7

H3C NSQ1GT48EA0 LPU manual

1 Card view

Figure 1 NSQ1GT48EA0 LPU

2 Specifications

The NSQ1GT48EA0 provides 48 10/100/1000BASE-T Ethernet ports on its front panel.

Figure 2 Front panel of the NSQ1GT48EA0

(1) 10/100/1000BASE-T Ethernet port (2) 10/100/1000BASE-T Ethernet port status LED

Table 1 LPU specifications

Item S

ecification

Dimensions (H × W × D) 40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)

Power consumption 67 W to 95 W

Weight 3.31 kg (7.30 lb)

Hot swapping Supported

Connector type RJ-45

Interfaces 48 10/100/1000Base-T Ethernet ports

Transmission speed 10/100/1000 Mbps, half/full duplex

Ambient temperature

•Operating: 0°C to 45°C (32°F to 113°F)

•Storage: –40°C to +70°C (–40°F to +158°F)

Manual Version: 6PW104-20170414 BOM: 3123A0R7

Item S

ecification

Ambient humidity

•Operating: 10%RH to 95%RH, noncondensing

•Storage: 5%RH to 95%RH, noncondensing

Compatible device model and slot

•M9006 gateway (slot 2 to slot 5)

•M9010 gateway (slot 0 to slot 3 and slot 6 to slot 9)

•M9014 gateway (slot 0 to slot 5 and slot 8 to slot 13)

•T9006 IPS (slot 2 to slot 5)

•T9010 IPS (slot 0 to slot 3 and slot 6 to slot 9)

•T9014 IPS (slot 0 to slot 5 and slot 8 to slot 13)

3 LEDs

The NSQ1GT48EA0 provides LEDs to show the operating status of the LPU.

Table 2 LED description

Status Descri

tion

Flashing The port is sending or receiving data.

On A link is present.

Off No link is present.

4 Installing and removing the NSQ1GT48EA0

CAUTION:

•Wear a well-grounded ESD-preventive wrist before you install or remove the LPU.

•Do not touch the surface-mounted components directly with your hands when you install or remove

the LPU.

4.1 Installing the NSQ1GT48EA0

1. Face the front panel of the device.

2. Identify the slot to install the LPU, and remove the filler panel from the slot.

This manual uses slot 3 as an example.

3. Place the LPU horizontally with the surface-mounted components facing upward. Pull outward the

ejector levers and gently push the LPU in along the slot guide rails until the LPU is in close contact

with the backplane. (See callout 1 in Figure 3 .)

4. Push the ejector levers inward. (See callout 2 in Figure 3 .)

5. Tighten the captive screws with a Phillips screwdriver to secure the LPU in the slot. (See callout 3

in Figure 3 .)

Manual Version: 6PW104-20170414 BOM: 3123A0R7

iii

Figure 3 Installing an NSQ1GT48EA0

(1) Gently push the LPU in alon

the slot

uide rails until the LPU is in close contact with the backplane.

(2) Push the ejector levers inward.

(3) Tighten the captive screws with a Phillips screwdriver.

4.2 Removing the NSQ1GT48EA0

1. Use a Phillips screwdriver to loosen the captive screws at both sides of the LPU until all pressure is

released.

2. Pull the ejector levers at both sides of the LPU outward, and pull the LPU along the guide rails until

it completely comes out of the backplane.

3. Place the LPU on an anti-static workbench with the surface-mounted components up, or put it in an

anti-static bag.

If no new LPU is to be installed, install a filler panel to prevent dust and ensure good ventilation in

the device.

5 Obtaining documentation

To access the most up-to-date H3C product documentation on the H3C website at www.h3c.com.hk:

1. Go to http://www.h3c.com.hk/Technical_Documents.

2. Choose the desired product category and model.

Andere H3C Netzwerk-Hardware Handbücher

H3C

H3C NSQ1TGX4EA0 LPU Bedienungsanleitung

H3C

H3C LSQM1BFANSCB Bedienungsanleitung

H3C

H3C DHCP Bedienungsanleitung

H3C

H3C WA6300-CMW710-R2444P01 Anleitung zur Verwendung

H3C

H3C 1000BASE-X-SFP Bedienungsanleitung

H3C

H3C SecPath U200 Series Bedienungsanleitung

H3C

H3C SecPath M9000 NSQ1SUPB0 MPU Bedienungsanleitung

H3C

H3C S5120V3-EI Series Bedienungsanleitung

H3C

H3C S7500 Series Bedienungsanleitung

H3C

H3C SecCenter CSAP-SA Bedienungsanleitung

H3C

H3C WA2620X-AGNP Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C SecPath L1000-A Bedienungsanleitung

H3C

H3C LSWM2ZSP2P Bedienungsanleitung

H3C

H3C FAN-120-1-A Bedienungsanleitung

H3C

H3C XE 200 Bedienungsanleitung

H3C

H3C H3C S7500E-X Kurzanleitung

H3C

H3C SecPath F50X0 Series Bedienungsanleitung

H3C

H3C SR8800 IM-FW-II Bedienungsanleitung

H3C

H3C LSWM12H2Q Bedienungsanleitung

H3C

H3C SecPathT5030 Bedienungsanleitung

H3C

H3C S5800-54S Bedienungsanleitung

H3C

H3C SecPath F1070 Bedienungsanleitung

H3C

H3C SecPath F5000-AI-20 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung