H3C H3C S3600 Series Montageanleitung

H3C S3600 Series Ethernet Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: 20090618-C-1.02

Product Version: Release 1602

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Technical Support

customer_service@h3c.com

http://www.h3c.com

About This Manual

Organization

H3C S3600 Series Ethernet Switches Command Manual-Release 1602 is organized as follows:

Part Contents

1 CLI Introduces the commands used for switching between the

command levels and command level setting.

2 Login Introduces the commands used for logging into the Ethernet

switch.

3 Configuration File Management Introduces the commands used for configuration file

management.

4 VLAN Introduces the commands used for configuring VLAN.

5 IP Address and Performance Introduces the commands used for IP address configuration

and IP performance configuration.

6 Voice VLAN Introduces the commands used for voice VLANconfiguration.

7 GVRP Introduces the commands used for GVRP configuration.

8 Port Basic Configuration Introduces the commands used for basic port configuration.

9 Link Aggregation Introduces the commands used for link aggregation.

10 Port Isolation Introduces the commands used for port isolation.

11 Port Security-Port Binding Introduces the commands used for port security configuration

and port binding.

12 DLDP Introduces the commands used for DLDP configuration.

13 MAC Address Table

Management Introduces the commands used for MAC address forwarding

table management.

14 Auto Detect Introduces the commands used for auto detect configuration.

15 MSTP Introduces the STP-related commands.

16 Routing Protocol Introduces the commands used for routing protocol

configuration.

17 Multicast Introduces the commands used for multicast configuration.

18 802.1x and System Guard Introduces the commands used for 802.1x and System Guard

configuration.

19 AAA Introduces the commands used for AAA, RADIUS,

HWTACACS, and EAD configuration.

20 Web Authentication Introduces the commands used for Web Authentication

configuration.

21 MAC Address Authentication Introduces the commands used for MAC address

authentication configuration.

22 VRRP Introduces the commands used for VRRP configuration.

23 ARP Introduces the ARP-related commands.

24 DHCP Introduces the commands used for DHCP server, DHCP

relay, and DHCP-snooping configuration.

25 ACL Introduces the ACL-related commands.

Part Contents

26 QoS-QoS Profile Introduces the commands used for QoS and QoS profile

configuration.

27 Web Cache Redirection Introduces the commands used for Web cache redirection

configuration.

28 Mirroring Introduces the commands used for port mirroring.

29 IRF Fabric Introduces the commands used for IRF fabric configuration.

30 Cluster Introduces the commands used for cluster management.

31 PoE-PoE Profile Introduces the commands used for PoE and PoE profile

configuration.

32 UDP Helper Introduces the commandsused for UDP Helper configuration.

33 SNMP-RMON Introduces the commands used for SNMP and RMON

configuration.

34 NTP Introduces the NTP-related commands.

35 SSH Introduces the commands used for SSH configuration.

36 File System Management Introduces the commands used for file system management.

37 FTP–SFTP-TFTP Introduces the related commands of FTP, SFTP and TFTP.

38 Information Center Introduces the commands used for information center

configuration.

39 System Maintenance and

Debugging Introduces the commands used for system maintenance and

debugging.

40 VLAN-VPN Introduces the commands used for VLAN VPN configuration.

41 HWPing Introduces the commands used for HWPing configuration.

42 IPv6 Management Introduces the commands used for IPv6 Management

configuration.

43 DNS Introduces the commands used for DNS configuration.

44 Smart Link-Monitor Link Introduces the commands used for Smart Link and Monitor

Link configuration.

45 Access Management Introduces the commands used for Access Management

configuration

46 Appendix Lists all the commands described in this command manual in

an alphabetic order. The parts and pages where the

commands are described are also given.

Conventions

The manual uses the following conventions:

Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are optional.

Convention Description

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars.

One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and

separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars.

A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and

separated by vertical bars. Many or none can be selected.

&<1-n> The argument(s) before the ampersand (&) sign can be entered 1 to n

times.

# A line starting with the # sign is comments.

Symbols

Convention Description

Means reader be extremely careful. Improper operation may cause

bodily injury.

Means reader be careful. Improper operation may cause data loss or

damage to equipment.

Means a complementary description.

Related Documentation

In addition to this manual, each H3C S3600 Series Ethernet Switches documentation set includes the

following:

Manual Description

H3C S3600 Series Ethernet Switches Operation

Manual-Release 1602 It is used for assisting the users in data

configurations and typical applications.

H3C S3600 Series Ethernet Switches

Installation Manual It provides information for the system installation.

Obtaining Documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at this URL:

http://www.h3c.com.

The following are the columns from which you can obtain different categories of product documentation:

[Products & Solutions]: Provides information about products and technologies, as well as solutions.

[Technical Support & Document > Technical Documents]: Provides several categories of product

documentation, such as installation, configuration, and maintenance.

[Technical Support & Document > Software Download]: Provides the documentation released with the

software version.

Documentation Feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Table of Contents

1 CLI Configuration Commands··················································································································1-1

CLI Configuration Commands·················································································································1-1

command-privilege level··················································································································1-1

display history-command·················································································································1-3

super················································································································································1-4

super authentication-mode··············································································································1-5

super password·······························································································································1-5

1-1

1 CLI Configuration Commands

The super authentication-mode command is added. For details, see super authentication-mode.

CLI Configuration Commands

command-privilege level

Syntax

command-privilege level level view view command

undo command-privilege view view command

View

System view

Parameters

level level: Command level to be set, in the range of 0 to 3.

view view: CLI view. It can be any CLI view that the Ethernet switch supports. The S3600 series support

only the CLI views listed in Table 1-1:

Table 1-1 Available CLI views for the view argument

CLI view Description

acl-adv Advanced ACL view

acl-basic Basic ACL view

acl-ethernetframe Layer 2 ACL view

acl-user User-defined ACL view

aux Aux 1/0/0 port view, that is, console port view

cluster Cluster view

detect-group Detected group view

dhcp-pool DHCP address pool view, which is supported by only the

S3600-EI series

ethernet 100M Ethernet port view

ftp-client FTP client view

gigabitethernet GigabitEthernet port view

1-2

CLI view Description

hwping HWPing test group view

hwtacacs HWTACACS view

isp ISP domain view

loopback Loopback interface view

luser Local user view

manage-vlan Management VLAN view

msdp MSDP view, which is supported by only the S3600-EI

series

mst-region MST region view

mtlk-group Monitor link group view

null NULL interface view

ospf OSPF view, which is supported by only the S3600-EI

series

ospf-area OSPF area view, which is supported by only the S3600-EI

series

peer-key-code Public key editing view

peer-public-key Public key view

pim PIM view, which is supported by only the S3600-EI series

poe-profile PoE profile view

qinq QinQ view

qos-profile QoS profile view

radius-template RADIUS scheme view

rip RIP view

route-policy Routing policy view

shell User view

smlk-group Smart link group view

system System view

user-interface User interface view

vlan VLAN view

vlan-interface VLAN interface view

command: Command for which the level is to be set.

Description

Use the command-privilege level command to set the level of a specified command in a specified

view.

Use the undo command-privilege view command to restore the default.

Commands fall into four levels: visit (level 0), monitor (level 1), system (level 2), and manage (level 3).

The administrator can change the level of a command as required. For example, the administrator can

1-3

change a command from a higher level to a lower level so that the lower level users can use the

command.

The default levels of commands are described in the following table:

Table 1-2 Default levels of commands

Level Name Command

0 Visit level Commands used to diagnose network, such as ping, tracert, and

telnet commands.

1 Monitor level

Commands used to maintain the system and diagnose service fault,

such as debugging, terminal and reset commands.

2 System level All configuration commands except for those at the manage level.

3 Manage level

Commands associated with the basic operation modules and

support modules of the system, such as file system,

FTP/TFTP/XMODEM downloading, user management, and level

setting commands.

Examples

# Set the level of the system-view command in user view (shell) to 0.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] command-privilege level 0 view shell system-view

display history-command

Syntax

display history-command

View

Any view

Parameters

None

Description

Use the display history-command command to display the history commands of the current user, so

that the user can check the configurations performed formerly.

History commands are those commands that was successfully executed recently and saved in the

history command buffer. You can set the size of the buffer by the history-command max-size

command. When the history command buffer is full, the earlier commands will be overwritten by the

new ones.

By default, the CLI can save 10 history commands for each user.

Related commands: history-command max-size in login module.

Examples

# Display the history commands of the current user.

Andere Handbücher für H3C S3600 Series

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C S1526 Bedienungsanleitung

H3C

H3C SR8800-X Bedienungsanleitung

H3C

H3C H3C S7500E Series Bedienungsanleitung

H3C

H3C MSR 930 Bedienungsanleitung

H3C

H3C H3C S5600 Series Bedienungsanleitung

H3C

H3C AR 46-80 Bedienungsanleitung

H3C

H3C H3C S5100-SI Bedienungsanleitung

H3C

H3C SR6600 SPE-FWM Installationshandbuch

H3C

H3C S5560-HI Series Bedienungsanleitung

H3C

H3C SR6600-X Bedienungsanleitung

H3C

H3C S7502 Bedienungsanleitung

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C S6300 Series Bedienungsanleitung

H3C

H3C SR6608 Bedienungsanleitung

H3C

H3C s5820x series Bedienungsanleitung

H3C

H3C HIM-8FE Bedienungsanleitung

H3C

H3C SR8800-X Bedienungsanleitung

H3C

H3C MSR Series Installationshandbuch

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C S5500-HI Switch Series Bedienungsanleitung

H3C

H3C S12508CR Bedienungs- und Wartungshandbuch

H3C

H3C MSR 50 Series Handbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise