H3C S5150-EI Series Bedienungsanleitung

H3C S5150-EI Switch Series

Installation Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 5W100-20160415

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE,Aolynk, , H3Care, , IRF, NetPilot, Netflow, SecEngine,

SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of Hangzhou H3C

Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage, use,

and disposal of this product must meet the applicable national laws and regulations.

Preface

This installation guide describes the appearance, installation, power-on, maintenance, and

troubleshooting of the H3C S5150-EI Switch Series.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•About the H3C S5150-EI documentation set.

•Obtaining documentation.

•Technical support.

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the S5150-EI switch series.

Conventions

This section describes the conventions used in the documentation.

Port numbering in examples

The port numbers in the documentation are for illustration only and might be unavailable on your

device.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION: An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT: An alert that calls attention to essential information.

NOTE: An alert that contains additional or supplementary information.

TIP: An alert that provides helpful information.

Network topology icons

Convention Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.



Convention Description

Represents a security card, such as a firewall, load balancing, NetStream, SSL VPN,

IPS, or ACG card.

About the H3C S5150-EI documentation set

The H3C S5150-EI documentation set includes the following categories of documents:

Category Documents Purposes

Product description and

specifications Marketing brochures Describe product specifications and benefits.

Hardware specifications

and installation

Compliance and safety

manual

CE DOC

Provides regulatory information and the safety

instructions that must be followed during

installation.

Quick started guide Provides basic installation instructions.

Installation guide Provides a complete guide to hardware installation

and hardware specifications.

Power modules user

manual

Describes the appearance, specifications, and

installation and removal of hot-swappable power

modules.

H3C Transceiver

Modules User Guide Describes the appearance and specifications of

H3C transceiver modules.

H3C SFP[SFP+][XFP]

Transceiver Modules and

Network Cables

Installation Guide

Guides you through installing SFP/SFP+/XFP

transceiver modules and network cables.

H3C QSFP+ Transceiver

Modules and and

Network Cables

Installation Guide

Guides you through installing QSFP+ transceiver

modules and network cables.

Software configuration Configuration guides Describe software features and configuration

procedures.

Command references Provide a quick reference to all available

commands.

Operations and

maintenance

System log messages Explains the system log messages.

FAQ Covers the most frequently asked questions about

the hardware, software and system specifications.

Troubleshooting Guide Provides troubleshooting information for common

problems of using the product.

MIB Companion Describes the MIBs for the software release.

Release notes

Provide information about the product release,

including the version history, hardware and

software compatibility matrix, version upgrade

information, technical support information, and

software upgrading.

Obtaining documentation

Access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the following links to obtain different categories of product documentation:

[Technical Documents]—Provides hardware installation, software upgrading, and software feature

configuration and maintenance documentation.

[Products & Solutions]—Provides information about products and technologies, as well as solutions.

[Software Download]—Provides the documentation released with the software version.

Technical support

service@h3c.com

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Preparing for installation ················································································· 1

Safety recommendations ···································································································································1

Examining the installation site····························································································································1

Temperature/humidity ································································································································2

Cleanliness·················································································································································2

EMI·····························································································································································2

Laser safety················································································································································3

Installation tools ·················································································································································3

Installing the switch························································································· 4

Installing the switch in a 19-inch rack ················································································································5

Installation accessories ······························································································································5

Installation accessories ······························································································································6

Rack-mounting by using front mounting brackets ······················································································6

Rack-mounting by using front and rear mounting brackets (S5150-24S-PWR-EI)····································9

Mounting the switch on a workbench···············································································································13

Grounding the switch ·······································································································································13

Grounding the switch with a grounding strip ····························································································14

Grounding the switch with a grounding conductor buried in the earth ground ·········································16

Grounding the switch by using the AC power cord ··················································································16

Installing/removing a power module ················································································································17

Installing a PSR150 power module ··········································································································18

Removing a PSR150 power module ········································································································19

Installing a PSR360-56A/PSR720-56A/PSR1110-56A power module ····················································19

Removing a PSR360-56A/PSR720-56A/PSR1110-56A power module ··················································21

Connecting the power cord ······························································································································22

Connecting an AC power cord to the switch ····························································································22

Connecting a DC power cord to the switch ······························································································23

Connecting the PSR150-A1 ·····················································································································24

Connecting the PSR150-D1·····················································································································25

Connecting the PSR360-56A/PSR720-56A/PSR1110-56A ·····································································26

Verifying the installation ···································································································································26

Accessing the switch for the first time··························································· 27

Setting up the configuration environment ········································································································27

Connecting the console cable··························································································································27

Connecting the mini USB console cable ··········································································································28

Setting terminal parameters·····························································································································30

Powering on the switch ····································································································································30

Setting up an IRF fabric ················································································ 32

IRF fabric setup flowchart ································································································································32

Planning IRF fabric setup·································································································································33

Planning IRF fabric size and the installation site······················································································33

Identifying the master switch and planning IRF member IDs···································································33

Planning IRF topology and connections···································································································34

Identifying physical IRF ports on the member switches ···········································································35

Planning the cabling scheme ···················································································································35

Configuring basic IRF settings ·························································································································37

Connecting the physical IRF ports ···················································································································37

Verifying the IRF fabric setup···························································································································37

Maintenance and troubleshooting································································· 39

Power module failure ·······································································································································39

Fixed power module failure ······················································································································39

Hot swappable power module failure ·······································································································40

Fan failure ························································································································································41

Configuration terminal display problems··········································································································41

No display ················································································································································41

Garbled display ········································································································································41

Appendix A Chassis views and technical specifications ······························· 42

Chassis views ··················································································································································42

S5150X-16S-EI ········································································································································42

S5150X-16ST-EI ······································································································································43

S5150-24S-PWR-EI ·································································································································44

Technical specifications ···································································································································45

Appendix B FRUs and compatibility matrixes ··············································· 48

Power modules and compatibility matrixes······································································································48

Hot swappable power modules························································································································48

Appendix C Ports and LEDs ········································································· 50

Ports·································································································································································50

Console port·············································································································································50

Management Ethernet port ······················································································································50

USB port···················································································································································50

1/10GBASE-T autosensing Ethernet port ································································································51

2.5G/1000/100BASE-T autosensing Ethernet port ··················································································51

SFP+ port·················································································································································51

LEDs ································································································································································54

System status LED···································································································································54

Power module status LED························································································································54

RPS status LED ·······································································································································55

Port mode LED·········································································································································163H55

78HManagement Ethernet port LEDs·············································································································164H55

79H1/10GBASE-T autosensing Ethernet port LED ························································································165H56

80H2.5G/1000/100BASE-T autosensing Ethernet port LED ··········································································166H56

81HSFP+ port LED·········································································································································167H57

82HAppendix D Cooling system·········································································· 168H58

83HCooling system of the S5150X-16S-EI and 5150-24S-PWR-EI switches ················································169H58

84HCooling system of the S5150X-16ST-EI switch ·······················································································170H58

85HIndex ············································································································· 171H60

Preparing for installation

H3C S5150-EI Switch Series includes the following models:

•S5150X-16S-EI.

•S5150X-16ST-EI.

•S5150-24S-PWR-EI.

Safety recommendations

To avoid any equipment damage or bodily injury caused by improper use, read the following safety

recommendations before installation. Note that the recommendations do not cover every possible

hazardous condition.

•Before cleaning the switch, remove all power cords from the switch. Do not clean the switch

with wet cloth or liquid.

•Do not place the switch near water or in a damp environment. Prevent water or moisture from

entering the switch chassis.

•Do not place the switch on an unstable case or desk. The switch might be severely damaged in

case of a fall.

•Ensure good ventilation of the equipment room and keep the air inlet and outlet vents of the

switch free of obstruction.

•Connect the yellow-green protection grounding cable before power-on.

•Make sure the operating voltage is in the required range.

•To avoid electrical shocks, do not open the chassis while the switch is operating.

•To avoid damage caused by improper operation, do not open the chassis even if the switch is

powered off.

•When replacing power modules, wear an ESD wrist strap to avoid damaging the units.

Examining the installation site

The S5150-EI switches must be used indoors. You can mount your switch in a rack or on a

workbench, but make sure:

•Adequate clearance is reserved at the air inlet and outlet vents for ventilation.

•The rack or workbench has a good ventilation system.

•Identify the hot aisle and cold aisle at the installation site, and make sure ambient air flows into

the switch from the cold aisle and exhausts to the hot aisle.

•Identify the airflow designs of neighboring devices, and prevent hot air flowing out of the

neighboring device from entering the device.

•The rack is sturdy enough to support the switch and its accessories.

•The rack or workbench is reliably grounded.

To ensure correct operation and long service life of your switch, install it in an environment that meets

the requirements described in the following subsections.

Temperature/humidity

Maintain temperature and humidity in the equipment room as described in "Appendix A Chassis

views and technical specifications."

•Lasting high relative humidity can cause poor insulation, electricity creepage, mechanical

property change of materials, and metal corrosion.

•Lasting low relative humidity can cause washer contraction and ESD and bring problems

including loose captive screws and circuit failure.

•High temperature can accelerate the aging of insulation materials and significantly lower the

reliability and lifespan of the switch.

For the temperature and humidity requirements of different switch models, see "Technical

specifications."

Cleanliness

Dust buildup on the chassis might result in electrostatic adsorption, which causes poor contact of

metal components and contact points, especially when indoor relative humidity is low. In the worst

case, electrostatic adsorption can cause communication failure.

Table 1 Dust concentration limit in the equipment room

Substance Concentration limit (particles/m³)

Dust ≤3 x 104 (no visible dust on the tabletop over three days)

NOTE:

Dust diameter ≥5 μm

The equipment room must also meet strict limits on salts, acids, and sulfides to eliminate corrosion

and premature aging of components, as shown in Tabl e 2.

Table 2 Harmful gas limits in the equipment room

Gas Maximum concentration (mg/m3)

SO20.2

H2S 0.006

NH30.05

Cl20.01

EMI

All electromagnetic interference (EMI) sources, from outside or inside of the switch and application

system, adversely affect the switch in the following ways:

•A conduction pattern of capacitance coupling.

•Inductance coupling.

•Electromagnetic wave radiation.

•Common impedance (including the grounding system) coupling.

To prevent EMI, perform the following tasks:

•If AC power is used, use a single-phase three-wire power receptacle with protection earth (PE)

to filter interference from the power grid.

Andere Handbücher für S5150-EI Series

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C MSR600 Series Bedienungsanleitung

H3C

H3C S5560-HI Series Bedienungsanleitung

H3C

H3C SR8800 Series Bedienungsanleitung

H3C

H3C S3610 Series Montageanleitung

H3C

H3C S5500-HI Switch Series Bedienungsanleitung

H3C

H3C WT2024-U-PWR Bedienungsanleitung

H3C

H3C CR16000-F Installationshandbuch

H3C

H3C S12516CR Bedienungs- und Wartungshandbuch

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C H3C S5600 Series Bedienungsanleitung

H3C

H3C MSR 20-20 Handbuch

H3C

H3C MSR3600-28 Bedienungsanleitung

H3C

H3C RA200 Bedienungsanleitung

H3C

H3C MSR 5600 Installationshandbuch

H3C

H3C S3100 Series Bedienungsanleitung

H3C

H3C CR19000-20 Bedienungsanleitung

H3C

H3C SecPath L5000-S Bedienungs- und Wartungshandbuch

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C S3100-52P Montageanleitung

H3C

H3C RA200 Bedienungsanleitung

H3C

H3C SR6602 Bedienungsanleitung

H3C

H3C MSR 930 Bedienungsanleitung

H3C

H3C H3C S7500E Series Montageanleitung

H3C

H3C s5800 series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise