H3C S6300 Series Bedienungsanleitung

H3C S6300 Switch Series

OpenFlow Configuration Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: Release 23xx

Document version: 6W101-20150407

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of

Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Preface

The H3C S6300 documentation set includes 14 configuration guides, which describe the software

features for the H3C S6300 Switch Series and guide you through the software configuration procedures.

These configuration guides also provide configuration examples to help you apply software features to

different network scenarios.

The OpenFlow Configuration Guide describes the background, fundamentals, and configuration of

OpenFlow.

This preface includes:

•Audience

•Conventions

•About the H3C S6300 documentation set

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the S6300 series

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

Convention Descri

tion

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller

engine on a unified wired-WLAN switch.

Represents an access point.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.



Represents a security product, such as a firewall, UTM, multiservice security gateway, or

load-balancing device.

Represents a security card, such as a firewall, load-balancing, NetStream, SSL VPN, IPS,

or ACG card.

Port numbering in examples

The port numbers in this document are for illustration only and might be unavailable on your device.

About the H3C S6300 documentation set

The H3C S6300 documentation set includes:

Cate

Documents

Pur

oses

Hardware

specifications and

installation

Compliance and safety manual

CE DOC

Provides regulatory information and the safety

instructions that must be followed during

installation.

Installation quick start Provides basic installation instructions.

Installation guide Provides a complete guide to hardware installation

and hardware specifications.

Fan assemblies installation

manual

Describes the appearance, specifications, and

installation and removal of hot-swappable fan

assemblies.

Power modules user manual

Describes the appearance, specifications, and

installation and removal of hot-swappable power

modules.

Pluggable transceiver modules

installation guide

Guides you through installing SFP/SFP+/QSFP+

transceiver modules.

Pluggable modules manual

Describes the hot-swappable modules available for

the H3C switches, their external views, and

specifications.

Software

configuration

Configuration guides Describe software features and configuration

procedures.

Command references Provide a quick reference to all available

commands.

Operations and

maintenance

MIB Companion Describes the MIBs for the software release.

Release notes

Provide information about the product release,

including the version history, hardware and

software compatibility matrix, version upgrade

information, technical support information, and

software upgrading.



Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents]—Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions]—Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download]—Provides the documentation released with the

software version.

Technical support

servic[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Configuring OpenFlow················································································································································ 1

Overview············································································································································································1

Basic concepts ··························································································································································1

OpenFlow instance ··················································································································································5

Protocols and standards ··········································································································································5

OpenFlow configuration task list·····································································································································6

Configuring OpenFlow instances ····································································································································6

Creating an OpenFlow instance·····························································································································6

Associating an OpenFlow instance with VLANs···································································································6

Configuring flow table IDs·······································································································································7

Setting the controller mode for an OpenFlow instance························································································7

Setting the maximum number of flow entries for an extensibility flow table······················································8

Configuring inband management VLANs··············································································································8

Disabling MAC address learning in the VLANs associated with an OpenFlow instance································9

Configuring the datapath ID for an OpenFlow instance······················································································9

Activating or reactivating an OpenFlow instance ································································································9

Configuring controllers for an OpenFlow switch········································································································ 10

Configuring controllers and main connections··································································································· 10

Setting the connection interruption mode ··········································································································· 10

Setting OpenFlow timers ··············································································································································· 10

Configuring an OpenFlow instance to support dynamic MAC addresses ······························································ 11

Displaying and maintaining OpenFlow······················································································································· 11

OpenFlow configuration example································································································································ 12

Network requirements··········································································································································· 12

Configuration procedure ······································································································································ 12

Verifying the configuration··································································································································· 13

Index ···········································································································································································14

Configuring OpenFlow

Software-Defined Networking (SDN) was developed to meet the growing requirements of virtualization

technologies and data networks. SDN uses software to separate controlling functions from data

forwarding, and provides simple, flexible device operations and high extensibility.

OpenFlow is the communication interface between a controller and network devices to implement SDN.

With OpenFlow, you can perform centralized data forwarding management for physical and virtual

devices.

Overview

OpenFlow separates the data forwarding and routing decision functions. It keeps the flow-based

forwarding function and employs a separate controller to make routing decisions. A switch

communicates with the controller through a secure channel.

Figure 1 OpenFlow network diagram

Basic concepts

OpenFlow switch

OpenFlow switches include the following types:

•OpenFlow-only—Supports only OpenFlow operation.

•OpenFlow-hybrid—Supports both OpenFlow operation and traditional Ethernet switching

operation. Switches of this series are OpenFlow-hybrid switches.

OpenFlow port

IMPORTANT:

Loopback interfaces cannot be used as OpenFlow ports.

OpenFlow supports the following types of ports:

•Physical port—Corresponds to a hardware interface of a switch, such as an Ethernet interface. A

physical port can be either an ingress port or an output port.

•Logical port—Does not correspond to a hardware interface of a switch and might be defined by

non-OpenFlow methods, such as an aggregate interface. A logical port can be either an ingress

port or an output port.

•Reserved port—Defined by OpenFlow to specify forwarding actions. A reserved port can only be

an output port. Reserved ports include the following types:

{All—All OpenFlow ports that can be used to forward a packet.

{Controller—OpenFlow controller.

{Local—Local CPU.

{In port—Packet ingress port. This type is available in Release 2311P05 and later versions.

{Normal—Normal forwarding process.

{Flood—Flooding.

OpenFlow flow table

An OpenFlow switch matches packets against one or more user-defined flow tables. A flow table

contains flow entries, and packets are matched based on the matching precedence of flow entries.

OpenFlow flow tables include the following types:

•MAC-IP—Combines the MAC address table and FIB table.

A MAC-IP flow table provides the following match fields:

{Destination MAC address.

{VLAN.

{Destination IP address.

A MAC-IP flow table provides the following actions:

{Modifying the destination MAC address.

{Modifying the source MAC address.

{Modifying the VLAN.

{Specifying the output port.

•Extensibility—Provides more match fields and actions than a MAC-IP flow table, such as destination

MAC address, destination IP address, VLAN priority, TCP source port, and TCP destination port.

Flow entry

Figure 2 Components of a flow entry

A flow entry contains the following fields:

•Match fields—Matching rules of the flow entry. These contain the ingress port, packet headers, and

metadata specified by the previous table.

•Priority—Matching precedence of the flow entry. A packet is matched against the table and only

the highest priority flow entry that matches the packet is selected.

•Counters—Counts of the packets that match the flow entry.

•Instructions—To modify the action set or pipeline processing. These include the following types:

{Meter—Directs the packets to the specified meter to limit the rate of the packets.

{Apply-Actions—Applies the specified actions in the action list immediately.

{Clear-Actions—Clears all the actions in the action set immediately.

{Write-Actions—Modifies all the actions in the action set immediately.

{Goto-Table—Indicates the next flow table in the processing line.

Actions are executed in one of the following ways:

{Action Set—When the instruction set of a flow entry does not contain a Goto-Table instruction,

pipeline processing stops and the actions in the action set are executed. An action set contains

a maximum of one action of each type.

{Action List—The actions in the action list are executed immediately in the order specified by the

action list. The effect of those actions is cumulative.

•Timeouts—Maximum amount of idle time or hard time for the flow entry.

{idle Time—The flow entry is removed when it has matched no packets during the idle time.

{hard Time—The flow entry is removed when the hard time timeout is exceeded, regardless of

whether or not it has matched packets.

•Cookie—Flow entry identifier specified by the controller.

Table-miss flow entry

Every flow table must support a table-miss flow entry to process table misses. The table-miss flow entry

specifies how to process packets unmatched by other flow entries in the flow table. The table-miss flow

entry wildcards all match fields (all fields omitted) and has the lowest priority 0. The table-miss flow entry

behaves in most ways like any other flow entry.

OpenFlow pipeline

The OpenFlow pipeline processing defines how packets interact with flow tables contained by a switch.

The flow tables of an OpenFlow switch are sequentially numbered, starting at 0. The packet is first

matched against flow entries of first flow table: flow table 0. A flow entry can only direct a packet to a

flow table number which is greater than its own flow table number.

When a packet matches a flow entry, the OpenFlow switch updates the action set for the packet and

passes the packet to the next flow table. In the last flow table, the OpenFlow switch executes all actions

to modify packet contents and specify the output port for packet forwarding. If the instruction set of one

of the flow tables contains an action list, the OpenFlow switch executes the actions to modify a copy of

the packet immediately in this table.

Figure 3 OpenFlow forwarding workflow

Andere Handbücher für S6300 Series

Inhaltsverzeichnis

Andere H3C Schalten Handbücher

H3C

H3C S1526 Bedienungsanleitung

H3C

H3C PSR600-54A-B Bedienungsanleitung

H3C

H3C S12500X-AF Series Kurzanleitung

H3C

H3C S3600-28PSI Benutzerhandbuch

H3C

H3C S7500X Series Bedienungsanleitung

H3C

H3C S6850-56HF Bedienungs- und Wartungshandbuch

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C S6520X-EI Series Bedienungsanleitung

H3C

H3C H3C S3100 8C SI Bedienungsanleitung

H3C

H3C S5130S-EI series Bedienungsanleitung

H3C

H3C 6W101 Bedienungs- und Wartungshandbuch

H3C

H3C S5830 Series Bedienungsanleitung

H3C

H3C S3100V2-52TP Bedienungsanleitung

H3C

H3C A3600 Series Bedienungsanleitung

H3C

H3C S6850 Series Bedienungsanleitung

H3C

H3C S6850 Series Bedienungsanleitung

H3C

H3C S5120-SI Series Bedienungsanleitung

H3C

H3C S7500E-XS Series Bedienungsanleitung

H3C

H3C S10500X-G Series Betriebsanleitung

H3C

H3C LS-3100-16TP-EI-H3-A-O Bedienungsanleitung

H3C

H3C H3C S7500E Series Kurzanleitung

H3C

H3C S3100V2-52TP Bedienungs- und Wartungshandbuch

H3C

H3C S6300 Series Installationshandbuch

H3C

H3C S5500-SI Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung