Habey BIS-6764 Bedienungsanleitung
21015 Commerce Pointe Drive, Walnut, CA 91789
www.habeyusa.comwww.habeyusa.com
Quick Setup Guide
BIS-6764
Description QTY
BIS-6764 1
Power Cable 1
Power Adaptor 1
HDD Mount Screws 4
Packing List
Safety Warning:
The use and installation of this system should only be performed by
professionals. Improper installation of any electronic device or electrical
component can result in serious injury or death. Please make sure that all
safety precautions are taken into account.
Install Guide
Unpack all package contents and inspect
each component. Make sure all included
parts and accessories are present.
Step 1 - Inspect Contents
Using a phillips head screw driver, remove
the four screws on the sides of the enclosure.
Step 2 - Remove Top Cover
Align notch in memory circuit with
corresponding guide on the memory slot.
Insert the memory circut at a 45° angle and
press the circuit at and secure it to the
memory slot with an audible click on each
side of the memory slot.
Step 3 - Install RAM
Step 4 - Install 2.5” HDD
Using a phillips head screw driver, remove
the three screws on the bottom cover.
www.habeyusa.comwww.habeyusa.com
In order to connect the 2.5” HDD to the HDD
port correctly in the next step, make sure the
HDD head is on the opposite side of the top
mounting screw hole.
Your system is now ready. Connect the power cable to a power source and
press the power button on the front of the system.
Step 5 - Hardware Installation Complete
Mount the HDD on the tray with the four
screws in the small plastic package.
Make sure the HDD port in the right position,
and then connect the 2.5” HDD head to the
HDD port.
Finally, tighten the three screws on the
bottom cover.
Input / Output
Dimensions
21015 Commerce Pointe Drive, Walnut, CA 91789
www. habeyusa.com
Copyright©2014. Habey USA. All Rights Reserved. Version 1.
COM 4x USB2.0 Audio
LANVGAHDMI
Power
2x USB2.0
190mm/ 7.5”
190mm/ 7.5”
67mm/ 2.6”
Rear Panel
Front Panel
Inhaltsverzeichnis
Andere Habey Desktop Handbücher
