Hafco WBS-1836 Bedienungsanleitung
INSTRUCTION MANUAL
WBS-1836
Wide Belt Sander (240V)
420mm
L124
Page 1
Instructions Manual for WBS-1836 (L124)
07/08/2017
L124
WIDE BELT SANDER
WBS-1836
INSTRUCTION & PARTS MANUAL
7-10-10
Page 2
Instructions Manual for WBS-1836 (L124)
07/08/2017
1
WBS-1836
WIDE-BELT SANDER
Page 3
Instructions Manual for WBS-1836 (L124)
07/08/2017
2
Preface------------------------------------------------------------------------------------3
General SafetyRules for woodworking machinery------------------------4-5
Specifications --------------------------------------------------------------------------6
Machine Legend -----------------------------------------------------------------------7-8
Electrical Connections -------------------------------------------------------------9
Sanding Operation -------------------------------------------------------------------9
Mounting and Replacing Sanding Belt-----------------------------------------10
Adjusting the Conveyor Belt Tracking ＆Tension ------------------------11
Adjusting the Conveyor Belt Tracking ----------------------------------------11
Replacing the Conveyor Belt------------------------------------------------------12
Adjusting the Conveyor Belt Parallelism--------------------------------------13
Attaching a dust collector----------------------------------------------------------14
Lubrication and maintenance-----------------------------------------------------15
Troubleshooting-----------------------------------------------------------------------15
Assembly Diagram--------------------------------------------------------------------16-22
Parts List ------------------------------------------------------------------------------23-29
TABLE OF CONTENTS
Page 4
Instructions Manual for WBS-1836 (L124)
07/08/2017
3
Thank you for choosing this Belt Sander. We are pleased to offer you our best machinery and
service, and trust that you will find our machinery economical, productive and easy to operate.
This manual covers the proper operation, safety and maintenance of the machine. It is important
that this manual be read in its entirety before operating the machine. Although the machine has
been checked and inspected in compliance with relevant safety regulations, the machine's safety
and best performance are dependent on proper maintenance and operation. Hazards that arise
due to improper operation and maintenance are solely the responsibility of the operator.
We thank you again for you choice, and for your careful reading of this manual.
PREFACE
Page 5
Instructions Manual for WBS-1836 (L124)
07/08/2017
4
There is a certain amount of hazard involved with the use of woodworking machinery. Using the
machine with the respect and caution demanded as far as safety precautions are concerned will
considerably lessen the possibility of personal injury. However, if normal safety precautions are
overlooked or ignored, severe personal injury to the operator can occur.
1. Read the operation manual before operating this machine.
2. The machine should be disconnected from the power source before performing maintenance
or adjustments to the internal mechanisms, or when making repairs.
3. Before leaving the machine, make sure the work area is clean.
4. Check timber for loose knots, nails, or other items which may cause a hazard or affect the
machine's performance.
5. Keep all guards in place and in working order.
6. Do not force the machine. It will do the job better and be safer working at the rate for which it
was designed.
7. All children and visitors should be kept a safe distance from the working area.
8. The operator should keep proper footing and balance at all times.
9. Do not operate the machine while under the influence of drugs, alcohol, or any other
medication.
10. Avoid awkward operations and hand positions where a sudden slip could cause your hand to
move into the sanding area.
11. Never leave the machine until it comes to a complete stop, and never leave the machine
running unattended.
12. The employer is responsible for selecting competent and qualified employees.
13. Safety shoes should be worn to provide protection against rolling objects, falling objects, and
sharp edges in the workplace.
14. Eye protection should be worn and such devices should be carefully selected, fitted and used.
Compulsory wearing of glasses with impact resistant lenses and side shields is a good safety
policy.
15. Wear hearing protection when operating the machine.
16. Do not wear rings, necklaces or jewelry around moving machinery.
17. Do not wear loose fitting clothes. Clothing should be comfortable, but long sleeves, neckties,
etc. should not be worn.
GENERAL SAFETY RULES FOR WOODWORKING MACHINERY
Page 6
Instructions Manual for WBS-1836 (L124)
07/08/2017
5
18. Do not wear gloves or other hand covering articles around moving machinery.
19. Cover long hair with a hair net or cap.
20. Protective guards and shields must be in place at all times unless they must be removed for
specific service or maintenance. They should be immediately replaced when service or
maintenance is completed.
21. Make sure that operator clearly knows how to stop the machine before starting work.
22. Never clean or remove chips while the machine is running.
23. Do not alter or remove guards and warning labels.
24. Keep the working area clean. Do not allow the floor to become slippery, or covered with dust
or obstacles. Dust that accumulates in the work area is a hazard that can cause you to fall or
slip against the machine or its controls.
GENERAL SAFETY RULES FOR WOODWORKING MACHINERY
Page 7
Instructions Manual for WBS-1836 (L124)
07/08/2017
6
MODEL WBS-1836
Max. Sanding width 18"
Max. Thickness of work piece 4"
Min. thickness of work piece 1/4"
Drum speed 50Hz-1420rpm
60Hz-1720rpm
Freed speed 6 ~ 22 FPM
Drum Diameter 82mm
Drum Length 407mm
Drum Drive Motor 2.2Kw
Feed Drive Motor 130W
Dust Hood Outlet Diameter O100mm
Net weight 215 kg
Gross weight 265 kg
Packing dimensions 103×86×174 cm
Noise Level 82dB
SPECIFICATIONS
Page 8
Instructions Manual for WBS-1836 (L124)
07/08/2017
7
Door for Replacing
Sanding Belt
Conveyor cover
Conveyor belt
key switch
Dust chute
Power switch
Extension Table
Rear Extension Table
Adjusting Screw
for Conveyor Belt
Cabinet
Sanding drum
dust cover
MACHINE LEGEND
Door
Extension Wing
Infeed stopper
(Prevent
pressing&Power
failure)
Page 9
Instructions Manual for WBS-1836 (L124)
07/08/2017
8
Height adjustment
handle assemble
Indicator
Bracket
Sanding drum motor
Conveyor feed
motor
MACHINE LEGEND
Page 10
Instructions Manual for WBS-1836 (L124)
07/08/2017
Inhaltsverzeichnis
Andere Hafco Sander Handbücher
