Haier HLP141E Bedienungsanleitung

User Manual

Model HLP141E

Guide de l’Utilisateur

Modéle HLP141E

Manual del Usuario

Para Modelo de HLP141E

Electric Vented Tumble Dryer

Sécheuse Électrique Ventilée

Secadora eléctrica de ropa con

ventilación

English

IMPORTANT SAFETY INSTRUCTIONS

WARNING - To reduce the risk of ﬁre, electric shock, or injury to persons

when using your appliance, follow the basic precautions, including the

following:

1. Read all instructions before using the appliance.

2. Do not dry articles that have been previously cleaned in, washed in, soaked in, or

spotted with gasoline, dry-cleaning solvents, or other ﬂammable or explosive

substances, as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4 Before the appliance is removed from service or discarded, remove the door to the

drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to water and/or to the

weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless

speciﬁcally recommended in the user-maintenance instructions or in published user-

repair instructions that you understand and have skills to carry out.

9. Do not use fabric softeners or products to eliminate static unless recommended by the

manufacturer of the fabric softener or product.

10. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

11. Clean lint screen before or after each load. DO NOT OPERATE THE DRYER WITHOUT

THE LINT FILTER IN PLACE.

12. Keep area around the exhaust opening and adjacent surrounding areas free from the

accumulation of lint, dust and dirt.

13. The interior of the appliance and the exhaust duct should be cleaned periodically,

preferably by qualiﬁed service personnel.

14. Do not place items exposed to cooking oils in your dryer. Items contaminated with

cooking oils may contribute to a chemical reaction that could cause a load to catch ﬁre.

15. If material has been used with any ﬂammable liquids or solids it should not be used in

the dryer until all traces of the ﬂammable liquids and its fumes have been removed.

16. This dryer must be properly installed in accordance with the installation instructions

before it is used.

17. Proper grounding must be ensured to reduce the risk of electric shock and ﬁre. Check

with a qualiﬁed electrician or service personnel if you are in doubt as to whether the

dryer is properly grounded. See grounding instructions in the installation section.

18. Use the dryer only for its intended purpose, drying clothes.

19. Always disconnect dryer from electrical supply before attempting any service.

Disconnect power cord by grasping the plug, not the cord.

20. Replace worn power cords and/or loose plugs.

SAVE THESE INSTRUCTIONS

English

DANGER

Risk of child entrapment. Before you throw away your old

appliance, take off the door so that children may

not easily get trapped inside.

WARNING!

As dry cleaning solvents, gasoline, vegetable and cooking oil are

highly hazardous materials, items soaked in or spotted with such should

not be used in the dryer. Items may still contain a substantial amount of

the hazardous material after being washed. When such items are exposed

to heat they could ignite. As clothes are stacked and piled up the dryer

the heat cannot escape. Due to this, items become hot enough to possibly

ignite. Washing in hot water with extra detergent would reduce

but not eliminate the risk of fire.

Thank you for purchasing our Haier

product. This easy-to-use manual

will guide you in getting the best

use of your washer.

Remember to record the model and

serial number. They are on a label

in back of the washer.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain

warranty service.

Please register online at www.prodregister.com/Haier

HOUSEHOLD USE ONLY

Grounding Instructions:

sihT appliance must be grounded. It is equipped with a 3-wire cord having

a grounded plug. The plug must be plugged into an outlet which is properly

installed and grounded

Warning – Improper use of the grounded wire can result in the risk of electric

shock. Consult a qualiﬁed electrician if necessary. Do not attempt to defeat this

safety feature by modifying the plug. Avoid the use of an extension cord because

it may overheat and cause a risk of ﬁre. However, if it is necessary to use an

extension cord:

A. Use only 3-wire extension cord with 3-blade grounding plug.

B. The marked rating of the extension cord must be equal to or greater than the

rating of this appliance.

Attempting any maintenance or cleaning:

To minimize the possibility of electric shock, unplug this appliance from the power

supply or disconnect the dryer at the household distribution panel by removing

the fuse or switching off the circuit breaker before attempting any maintenance or

cleaning (except the removal and cleaning of the lint ﬁlter).

NOTE: Pressing the POWER button to an off position or pressing START/

PAUSE button, does NOT disconnect the appliance from the power supply.

English

ELECTRICAL REQUIREMENTS

WARNING!

Avoid ﬁre hazard or electric shock. Do not use an extension cord or an

adapter plug. Do not remove any prong from the power cord.

Avoid fire hazard or electric

Grounding type wall receptacle

shock. Do not use an extension cord or an

adapter plug. Do not remove any prong from

the power cord.

Do not, under any

circumstances,

cut, remove, or bypass

the grounding prong.

Power supply

cord with 3-prong

grounding plug

English

TABLE OF CONTENTS

1. Inspect and remove all packing materials. This includes the foam and any

adhesive tape both inside and outside of the unit.

2. Inspect and remove any remains of packing, tape or printed materials before

powering on the dryer.

UNPACKING YOUR DRYER

Safety Instructions ...............................................................................1

Product Registration ............................................................................2

Electrical Requirements .......................................................................3

Unpacking Your Dryer.........................................................................4

Parts and Features...............................................................................5

SET UP INSTRUCTIONS...............................................................6-8

Location of Your Dryer ........................................................................6

Assemble Dryer for Installation .............................................................7

Venting the Dryer................................................................................8

INSTALLATION INSTRUCTIONS ................................................9-11

Wall Mounting Instructions............................................................10-11

Completing Installation ......................................................................11

OPERATIONAL INSTRUCTIONS ............................................. 12-17

Control Panel ...................................................................................12

Quick Start..................................................................................13-14

Timed Dry ........................................................................................15

Drying Tips and Precautions...............................................................16

Moving and Vacationing and Storage.................................................17

Troubleshooting ................................................................................18

Limited Warranty ..............................................................................19

English

Front

Back

PARTS AND FEATURES

Drum

Lint Filter Assembly

Door

Door Gasket

Air Intake

Digital Control Panel

Dryer Hanging Wall Hook

Power Cord Exhaust Pipe

Exhaust Vent Housing

Casing Back Cover

Spacer

Timed

Dry Temp

Drying

Cool Down

Complete

Clean Lint

Normal

Timed Dry

Heavy Duty

Delicate

120

High

Low

No Heat

150

Cycle Status

Auto

Cycles Dry

Temp

START

POWER

Dry

PAUSE

English

SET UP INSTRUCTIONS

Tools and Parts Required for Installation:

Philips Head Screw Drivert

Flat Head Screw Drivert

Electric Drill and 1/8 inch drill bitt

Stud ﬁnder (optional)t

(6) Wood screws for mounting plywoodt

Plywood board; size 30 (h) by 25(w) inches or wood slatst

Venting materials:

4 inch diameter metal exhaust rigid ducting and ﬁttings or UL ﬂexible metalt

dryer vent hose, that should not exceed 6 feet.

2 additional hose clamps for ducting outside exhaust vent hoset

Metal Elbows or outdoor vents as needed.t

Location of Your Dryer

First ﬁnd a suitable location where you can mount the dryer on the wall and still

have access to 120 Volt outlets and exterior venting.

Type: Electric dryer

Rating: Please refer to the rating label regarding detailed information

Size: 27x24.8x16.7(inch)

Capacity: 2.5 cu.ft.

Weight: 57.3lbs(26kg)

Check dryer size and ensure a good location for the dryer installation on at wall where you can mount the unit using wall studs or beams.

It is recommended to use a plywood board (30 by 25 inches) to mount thetdryer using the walls beams and studs as support, rather than just wood slats.

Make sure the dryer power cord can reach a 120 Volt outlet.t

Make sure you can connect the exhaust vent to the outside or designatedt dryer vent (in a laundry room).

The length of exhaust ducting should not exceed 6 feet.t

Please read the additional ducting information and warnings in this manual.t

16.7 "

27 "

24.8"

Vent to outside Nearest 120 Volt

AC outlet

English

Assemble Dryer for Installation

Screw mounting hook bracket and wall spacer to dryer with screws provided.

1. Attach Hanging hook bracket

using the 4 screws.

3. Remove the screw on the left side of the exhasut pipe.

4. Attach the Exhaust Vent Housing to the Exhaust Pipe. Postion the Exhaust Vent

Housing in one of two ways. Secure the housing in place with the screw that was

removed in step 3.

2. Attach the wall spacers to the bottom of

the dryer. Remove 2 screws and 2 ﬂat washers.

Remove this screw to attach

Exhasut Vent Housing.

Spacers

Exhaust Vent Housing

Exhaust Pipe

Positon the wall

spacers and secure

them with the screws

that were removed.

Remove and discard the

ﬂat washers from the

screws.

English

Venting The Dryer

Proper venting of the dryer is very important. Determine the best and safest

ducting for the dryer.

Exhaust Requirements and Maintenance.

Clothes dryer installation must be performed by qualiﬁed installer.1. Install the clothes dryer according to the manufacturer’s instructions and local codes.2. Do not install a clothes dryer with ﬂexible plastic venting materials. If ﬂexible metal3. (foil type) duct is installed, it must be of a speciﬁc type identiﬁed by the ﬂexible duct

manufacturer as suitable for use with clothes dryers. Flexible venting materials are

known to collapse, be easily crushed, and trap lint. These conditions will obstruct

clothes dryer airﬂow and increase the risk of ﬁre.

Clean old ducts before installing this dryer.4.

WARNING!

Outside

Vent

Correct Incorrect

Venting must conform to local building codes.t

Do not use thin plastic or foil ducting.t

Use 4 inches (10.2cm) diameter rigid or ﬂexible metal duct (note: ventingt materials are not supplied with the dryer, and you should obtain the venting

materials necessary for proper installation at your local hardware store).

Position the Dryer such that the exhaust duct run is as short as possible.t Make sure there is no more than 6 feet of exhaust ducting.

Clean old ducts before installing this dryert

Never bend or collapse ducting ﬂex hose. Use few elbows joints as needed.t

Use duct tape on all duct joints.t

Insulate ductwork that runs through unheated areas in order to reducet condensation and lint build-up on pipe walls.

To reduce the risk of ﬁre and combustion, the dryer must be vented outdoors. Lint

accumulation can cause ﬁres. Check and clean vents and ducting as often as possible.

PLEASE BE AWARE THAT FAILURE TO EXHAUST THE DRYER CORRECTLY WILL VOID THE

DRYER’S WARRANTY.

English

INSTALLATION INSTRUCTIONS

Location for installation and options for various walls

1. There are 2 mounting options- either using wood slats or a whole plywood

board. The dryer installation to the wall should be able to accommodate the

weight of the unit of 57.3 lbs. plus about 10 lbs. for clothing (or approximately

67.3 lbs). We suggest you use a plywood board for added support and safety,

this is the best way to mount.

2. Determine dryer position on the wall. A minimum of 6”(Inches) is needed

between the top of the dryer and the ceiling for installation.

3. If mounting the dryer above a washing machine, allow sufﬁcient space to

open the top lid of the washer.

4. The Best installation is to add a plywood board to the wall studs. As a

second option- you can use two (2) slats(2 by 4” )andattach to studs.

6 inches

6 inches 6 inches

6 inches

Mounting Dryer Bracket to wall

(Use template provided)

6 to 8 inches from Dryer to Celing

Stud

A. Sheet Rock B. Wood slats C. Plywood Back

Wrong way

to install

Good way

Add 2 wood

slats to studs

Best way

Add plywood

to studs

25 inches

30 inches

18 inches

Sheet Rock

Wood salts

Plywood

Andere Handbücher für HLP141E

Inhaltsverzeichnis

Sprachen:

Andere Haier Trockner Handbücher

Haier

Haier HD90-A636-F Bedienungsanleitung

Haier

Haier GDZ3.5-1-HK Bedienungsanleitung

Haier

Haier CHDE5300AW Bedienungsanleitung

Haier

Haier RDG350AW Bedienungsanleitung

Haier

Haier HDY60 Bedienungsanleitung

Haier

Haier RDE350AW - 6.5 Cu. Ft. Electric Dryer Bedienungsanleitung

Haier

Haier RDE350AW - 6.5 Cu. Ft. Electric Dryer Bedienungsanleitung

Haier

Haier HDE5000AW Bedienungsanleitung

Haier

Haier HD70-A82 Bedienungsanleitung

Haier

Haier HDV70E1 Verdrahtungsschema

Haier

Haier GDZ5-1 Bedienungsanleitung

Haier

Haier HDHP80AW1 Bedienungsanleitung

Haier

Haier Ginesis HLF103Q Bedienungsanleitung

Haier

Haier CG700AW Bedienungsanleitung

Haier

Haier HLP140E - 2.6 cu. Ft. Portable Vented Electric... Bedienungsanleitung

Haier

Haier HDY60M Bedienungsanleitung

Haier

Haier CGDE450AW Bedienungsanleitung

Haier

Haier HDY-M40 Bedienungsanleitung

Haier

Haier HD70-01 ME Bedienungsanleitung

Haier

Haier QFD15 Series Originalbetriebsanleitung

Haier

Haier HDV40A1 Bedienungsanleitung

Haier

Haier HD80-A2939 Bedienungsanleitung

Haier

Haier HD80-79 Bedienungsanleitung

Haier

Haier HDY5-1 Bedienungsanleitung

Beliebte Trockner Handbücher anderer Marken

Bosch

Bosch WTA79200GB Bedienungsanleitung

Amana

Amana W10233410A Bedienungsanleitung

Miele

Miele TWH 780 WP Bedienungsanleitung

Asko

Asko T760 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Bedienungsanleitung

Bosch

Bosch Logixx 10 WTB76556GB Technisches Datenblatt

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Bedienungsanleitung

Electrolux

Electrolux EW2H328R2 Bedienungsanleitung

Beko

Beko DS8433RX1M Bedienungsanleitung

Dawlance

Dawlance Spinner DS 6000 C Bedienungsanleitung

Electrolux

Electrolux TP5080TW Bedienungsanleitung

AEG

AEG TR838P4OB Bedienungsanleitung

Indesit

Indesit IDV 75 Bedienungsanleitung

Infiniton

Infiniton SD-DG85C Bedienungsanleitung

BOMANN

BOMANN WT 5019 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Bedienungsanleitung

Asko

Asko T793C Bedienungsanleitung

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Bedienungsanleitung