Haier HLP0R02AXW Bedienungsanleitung

Dryer Stack Stand Kit

For use with compact models:

Dryers - HLP141E

Washers - HLP28E, HLPW028AXW, HLP24E, HLP21N

Ensemble de support de superposition

poursécheuse

Pour utilisation avec les modèles compacts :

Sécheuses - HLP141E

Laveuses - HLP28E, HLPW028AXW, HLP24E, HLP21N

Soporte para apilar la secadora

Para usarse con los siguientes modelos compactos:

Secadoras - HLP141E

Lavadoras - HLP28E, HLPW028AXW, HLP24E, HLP21N

Installation Instructions

Instructions d’installation

Instrucciones de instalación

HLP0R02AXW

Part # 0570000042 REV B

TABLE OF CONTENTS

STACK STAND SAFETY........................................................................................1

PARTS AND FEATURES .......................................................................................3

INSTALLATION REQUIREMENTS.........................................................................4

Tools Needed ................................................................................................................. 4

Location Requirements.................................................................................................4

INSTALLATION INSTRUCTIONS.......................................................................... 5

Step 1 - Assemble Stand...............................................................................................5

Step 2 - Attach Dryer.....................................................................................................7

Step 3 - Attach Stand to Wall ........................................................................................9

Step 4 - Complete Installation....................................................................................10

Thank you for purchasing this Haier®product. The installation instructions will help

you get the best performance from your products.

STACK STAND SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and

on your appliance. Always read and obey all safety messages.

DANGER

WARNING

CAUTION

This is the safety alert symbol.

This symbol alerts you to potential hazards that can

kill or hurt you and others. All safety messages will

follow the safety alert symbol and either the word

“DANGER,” “WARNING” or “CAUTION.”

These words mean:

An imminently hazardous situation. You

could be killed or seriously injured if you

don’t immediately follow instructions.

A potentially hazardous situation

which, if not avoided, could result in

death or serious bodily injury.

A potentially hazardous situation

which, if not avoided, may result in

moderate or minor injury.

All safety messages will tell you what the potential hazard is, tell you

how to reduce the chance of injury, and tell you what can happen if the

instructions are not followed.

IMPORTANT SAFETY

INSTRUCTIONS

WARNING: To reduce the risk of re, electrical shock, injury to persons,

or damage when using the dryer stack stand, follow basic precautions,

including the following:

• Read all of the instructions

before installing and using this

product.

• Use this product only for

its intended puropose as

described in the installation

instructions.

• This product must be

properly installed and

located in accordance with

the installation instructions

before it is used.

• Do not install this product

where it will be exposed to

temperatures below freezing

or exposed to weather, which

can cause damage to the

product.

• Keep the area around

your product free from

combustible materials

such as lint, paper, rags and

chemicals.

• Close supervision is

necessary if this appliance is

used by or near children. Do

not allow children to play on,

with, or inside this product.

• Properly dispose of/recycle all

packaging material.

READ AND SAVE THESE

INSTRUCTIONS

HOUSEHOLD USE ONLY

WARNING

Tip Over Hazard

Installation of this stand to dryers other than Haier®approved models

may result in death or severe injury.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Failure to do so could result in death or serious injury.

PARTS AND FEATURES

ghi

klm

a Double-Sided Tape

b Mounting Brackets

c Support Brace (2)

d Double-Sided Foam Tape

e Cross Braces

f Pivot Nut

g Hex-head Bolt (2)

h Lag Bolt

i #8 Phillips-head

Screws (2)

j Lock Nut (2)

k Flat Washer (2)

l Split Lock Washer

m Star Washers (2)

For replacement fasteners, call Haier Customer Satisfaction Center at

1-877-337-3639, and reference the model number from the front cover.

INSTALLATION REQUIREMENTS

TOOLS NEEDED

• " and 7/16” Wrench • Phillips screwdriver

LOCATION REQUIREMENTS

• The stand must be installed on a solid oor. A concrete oor is best.

• The oor should be level.

• A suitable location is protected from direct sunlight and heat sources such as

radiators, baseboard heaters, or cooking appliances.

• Do not install on carpeting.

• The location must have appropriate electrical and gas supply outlets. See the

“Electrical & Gas Supply Requirements” section in your product’s User Manual.

• Do not install in a location where the dryer might come into contact with

combustible materials such as, but not limited to curtains, thick carpet, and/or

any materials that might obstruct ventilation.

STAND DIMENSIONS

75³⅚₄"

(192 cm)

48³⁷⁄₆₄"

(123.4 cm)

24¹¹⁄₁₆"

(62.7 cm)

19¹¹⁄₁₆"

(50 cm)

INSTALLATION INSTRUCTIONS

STEP 1 - ASSEMBLE STAND

1. Set the stand upright so that the dryer mounting brackets are at the top.

Mounting Brackets

2. Loosen the 6 nuts on the cross brace bolts to allow the braces to slide open.

WARNING

Pinch Hazard

Cross braces will slide and create pinch points during set-up. Keep

hands clear of sliding cross braces and their connection points.

Do not insert ﬁnger into moving parts. Doing so may result in severe

injury, cut or pinch.

3. Grasp the left-hand and right-hand sides of the stand as shown. Pull apart. Make

sure the bolts slide all the way to the end of the slot to ensure the stand is open

completely.

4. Cut the ties holding the support braces to the frame, and make sure the bolts in

the cross braces are loose.

5. Fasten the two support braces to the stack stand using the hex-head bolts, at

washers and lock nuts (provided).

6. Using a ” wrench, completely tighten all 4 of the support brace nuts.

jkg

Support Brace

Hex-head Bolt

Lock Nut

Flat Washer

7. Using a ½" wrench, completely tighten all 6 of the cross-brace nuts.

NOTE: Use a 7/16" wrench to tighten the pivot nut at the center of the rear cross

brace.

Cross Braces

Pivot Nut

STEP 2 - ATTACH DRYER

1. Remove bottom 2 panel screws from the back of the dryer and discard.

Panel Scre

WARNING

Excessive Weight Hazard

Use two or more people to move and install dryer.

Failure to do so can result in death or personal injury.

2. Lift dryer onto the stand and position the dryer so the screw holes align with the

mounting bracket holes.

3. Using the 2 screws and 2 star washers (provided), fasten the dryer to the

mounting brackets. Do not completely tighten screws.

Mounting Brackets

#8 Phillips-head Screw

Star Washer

4. Using 2 people, tip the dryer back enough to expose the double-sided tape on

the stand.

5. Remove the paper liner from the double-sided tape.

NOTE: The bottom of the dryer will adhere to the tape, so you need to make sure

the dryer is in the correct position before lowering it onto the tape.

Double-Sided Tape

6. Make sure the dryer is ush against the mounting brackets, and then slowly

lower the dryer onto the double sided tape.

7. Completely tighten the 2 screws used to fasten the dryer to the mounting

brackets.

Inhaltsverzeichnis

Sprachen:

Andere Haier Rack & Stand Handbücher

Haier

Haier HLP0001AXW Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung