Haier HRZ-176 AA Bedienungsanleitung

HRZ-176AA

Under Counter Fridge-Freezer

USER'S INSTRUCTIONS

○

1Top Cover

○

2Freezer Door

○

3Thermostat and Lamp assembly

○

4Glass Shelves

○

5Crisper Cover

○

6Crisper

○

7Adjustable Front Feet

○

8Door Shelves

○

9Fridge Door Gasket

○

10 Handle

○

11 Door Light Switch

Thank you for buying this Haier fridge-freezer. To ensure that you get the best results from your

new fridge, please take time to read through these simple instructions in this booklet.

Please ensure that the packaging material is disposal of in accordance with the current

environmental requirements.

If the appliance is visibly damaged, do not connect it to the power supply, contact the store from

where you purchased the appliance.

ELECTRICAL CONNECTION (UK ONLY)

For your safety please read the following information.

Warning: This appliance must be earthed.

The appliance must be connected to a 220 - 240 volts 50 cycle AC supply by means of a three pin

socket, suitably earthed and should be protected by a 13 amp fuse in the plug.

The appliance is supplied with a standard 13 amp 3-pin plug fitted with a 13-amp fuse.

Should the fuse require replacement, it must be replaced with a fuse rated at 13 amp and approved

to BS1362.

If the mains plug is unsuitable for the socket outlet in your home or is removed for any other

reason, then the cut off plug should be disposed of safely, do not insert the cut off plug into a

mains outlet to prevent the hazard of electric shock. Remove the fuse before disposal.

There is a danger of electric shock if the cut off plug is inserted into any 13-amp socket outlet.

How to wire a 13 amp plug:

Important

The wires in the mains lead on this appliance are colored in accordance with the following code:

Green and Yellow - Earth

Blue – Neutral

Brown – Live

As the colours may not correspond with the markings identifying the terminals in your plug

proceed as follows.

The green and yellow wire must be connected to the terminal in the plug which is marked with the

letter E or with the earth symbol or colored green and yellow.

The blue wire must be connected to the terminal marked N.

The brown wire must be connected to the terminal marked L.

You must make sure the mains cord is firmly secured under the cord clamp.

Warnings:

Keep ventilation openings, in the appliance enclosure or in the built in structure,

clear of obstructions.

Do not use mechanical devices or other means to accelerate the defrost process,

other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical devices inside the food storage compartments of the appliance,

unless they are of the type recommended by the manufacturer.

THANK YOU FOR PURCHASING THIS HAIER PRODUCT

This booklet contains the information you will require to install and operate your new

appliance.

It is important and worthwhile spending time to fully read this booklet so you will

understand how to operate the appliance safely and efficiently.

Please keep this booklet in a safe place so that you can refer to it when required.

Safety information

This information is provided in the interest of your safety. Please read the following

carefully before carrying out the installation or use of the appliance.

If you are discarding an old freezer or refrigerator with a lock / catch fitted to the

door, ensure that it is left in a disabled condition to prevent the entrapment of young

children when playing.

As old refrigeration equipment may contain CFC’s which will damage the ozone

layer, when disposing of any refrigeration equipment please contact your local waste

disposal department for advice on the correct method of disposal

This appliance must only be used for its intended purpose i.e. the storage of domestic

edible foodstuffs and should not be used for any other purpose

If the mains cable becomes damaged, it must be replaced by the manufacturer, its

service agent or a similarly qualified person to avoid a hazard.

Installation

Position the appliance and allow to stand for two to three hours before it is turned on

for the first time to allow the system to settle. Do not position next to any heat source

e.g. cooker, boiler or in direct sunlight etc.

A clearance of 10 cm must be left between the sides of the appliance and any adjacent

cabinets or walls to allow for adequate air circulation. The appliance is not designed

for recessed installation (“building in”).

Install on a good firm level surface, and any unevenness of the floor should be

corrected prior to installation, slight unevenness can be overcome by adjusting the

front feet.

NOTE: If the appliance is positioned on a carpet, soft floor covering you should re-

adjust the front feet once the appliance has had time to settle.

IMPORTANT SAFETY INFORMATION

This appliance must be used on the electric voltage shown on the rating plate,

failure to use the correct voltage will render the guarantee VOID and may cause

damage to the product.

This appliance is intended for domestic use only, any other use may invalidate

the warranty and might be dangerous.

This appliance is intended for indoor use only, do not use outdoors.

Accessible surfaces may get hot during operation, use handles and knobs at all

times.

To protect against electric shock do not immerse cord, plugs, or appliance in

water or other liquid.

Warning: Keep ventilation openings, in the appliance enclosure or in the

built-in structure, clear of obstruction.

Unplug from outlet when not in use and before cleaning. Remove food before

cleaning the appliance.

If the mains lead becomes damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified person with a lead of the same type and

rating to avoid a hazard.

Do not operate the appliance with a damaged cord or plug or after the

appliance malfunctions or has been damaged in any way. Consult the retail

store where you bought the appliance for advice.

The cooling circuit must not be damaged in any way.

Warning: Do not use mechanical devices or other means to accelerate the defrost

process, other than those recommended by the manufacturer.

Warning: Do not damage the refrigerant circuit.

Do not place the appliance near hot surfaces, or in direct sunlight.

Extreme caution must be used when moving an appliance, the appliance may be

heavy.

Warning: Do not use electrical appliances inside the food storage compartment of

the appliance, unless they are of the type recommended by the manufacturer.

Temperature Control

The refrigerator is designed to maintain an internal storage temperature in the

refrigerator compartment between to + .

Instructions for use

Remove all packing materials and wash the interior of the appliance using lukewarm

water containing a little bicarbonate of soda in the proportion of 1 teaspoon to 1.2 liters

(2 pints) of water. Do not use detergents or soaps as they may taint the food. After

cleaning, dry all parts thoroughly.

Never place hot or warm foods into the cabinet or leave the doors open for longer than

necessary as this will raise the temperature and cause excessive amounts of moisture thus

increasing the amount of ice in the refrigerator / freezer compartment.

The Internal Light

The internal light will automatically switch ON and OFF whenever the refrigerator door

is opened or closed. To change the light bulb, please see the chapter on changing the light

bulb.

To obtain a lower internal temperature turn the thermostat temperature control to a

higher number. To obtain a higher internal temperature turn the thermostat control

to a lower number. However, the internal temperature and temperature control

setting is dependent on a number of factors:

1. Varying ambient temperatures.

2. The number of times the appliance doors are opened and how long the doors remain

open.

3. The amount and temperature of the food and drink introduced into the appliance.

4. The weather conditions and time of year e.g. summer / winter.

5. The positioning of the appliance and an adequate air circulation to the sides and

back of the cabinet.

To enable adjustment of the temperature in the appliance it is fitted with an adjustable

thermostat located in the fridge compartment, which can be adjusted from setting 1

(warmest) to 7 (coldest). For normal working temperature it is recommended to adjust

the thermostat control to the midway position, after a few hours readjust the thermostat

to the desired temperature. There is also an off position 0 . Which turns OFF the

refrigerator and freezer compartments. Please Note this dose not disconnect the

appliance from the mains supply. To do this you must remove the mains plug from the

socket.

Making ice cubes ( Ice tray not supplied )

Pour water into the ice cube tray until it is two thirds full and place into the freezer. Ice

cubes will form in approximately 2 to 3 hours. The ice cube can be easily removed by

twisting the ice cube tray or running under cold water for a short time.

Freezing fresh food (Freezer)

Ensure that your freezing operations are carried out under the most hygienic conditions,

as freezing alone does not sterilize the food. Never put hot or even warm foodstuffs into

the freezer. Prior to storing the food, pack it in plastic bags, aluminum foil or freezer

containers and place into the freezer without putting them in contact with food that has

already been frozen. See the technical data sheet at the rear of this booklet for the

maximum permissible amount in kilograms of fresh food that can be frozen in any 24

hour period with a room temperature of 25C.Never freeze more than the maximum

permissible.

Store frozen food

When using the freezer for the first time or after defrosting, turn the thermostat

temperature control to setting 7 for at least two hours before introducing the food to be

stored, Then adjust to your preferred setting.

All frozen food products you purchase should be placed in the freezer as soon as

possible to avoid the frozen food from defrosting.

Storage recommendations printed on the packaging of frozen food by the

manufactures should always be followed.

Storage of fresh food in the refrigerator

Food should always be covered tightly with foil, plastic film, placed in bags or stored in

airtight containers. This will prevent food from dehydrating and prevent the strong smell

of some foods transferring to milder ones.

To store raw meat wrap in polythene bags or airtight containers and place on the

lowest shelf.

Do not allow raw meat to come into contact with cooked foods. For safety, only store raw

meat for two or three days. Fruit and vegetables should be thoroughly cleaned and

placed in the vegetable/ salad bin.

Milk and other liquids should be sealed with lids and placed in the bottle shelf on the

door.

Refrigerator defrost process

The refrigerator defrosting process is carried out automatically every time the

compressor stops.

The defrost water drains from the cabinet into a tray placed on the top of the

compressor to the rear of the unit where it evaporates.

Aways ensure the drain hole does not become blocked with food, the drain hole is located inside the

refrigerator tot the rear of the unit just above the crisper cover.

Freezer defrost process

Small amounts of frost will accumulate inside the freezer depending upon the

length of time during which the door is left open or the amount of moisture

introduced. It is essential to ensure that no frost or ice is allowed to form at places

where it will affect the close fitting of the door seal. This might allow air to

penetrate the cabinet, thus encouraging continuous running of the compressor. Thin

frost formation is quite soft and can be removed with a brush or plastic scraper. Do

not use metal or sharp scrapers, mechanical devices or other means to accelerate the

defrosting process. Remove all dislodged frost from the cabinet floor .For the

removal of thin frost it is not necessary to switch off the appliance.

For the removal of heavy ice deposits disconnect the appliance from the mains

supply and empty the contents into cardboard boxes and wrap in thick blankets or

layers of paper to keep them cold. Defrosting will be most effective if carried out

when the freezer is empty, and place a pan of hot water on one of the shelves and

close the door for faster defrosting.Do not forget to put a container under the front

of the freezer cavity to catch the water as the ice melts.

An increase in temperature of frozen food packages during defrosting will shorten

the storage life. Provided that the contents are well wrapped and placed in a cool area

they should keep for several hours.

Examine the contents when replacing them in the freezer and if some of the

packages have thawed out it should be eaten within 24hours or be cooked and refrozen.

After defrosting has finished clean the inside with a solution of warm water with a

little bicarbonate of soda and then dry thoroughly. Wash all removable parts in the

same way and reassemble. Reconnect the appliance to the mains supply and leave

for 2 to 3 hours on setting number 7 before introducing the food back into the

freezer and setting the thermostat to your normal setting(usually setting 4).

Power Failure

If there is a power failure for a short time less than 7hrs keep the door closed

Frozen food should not be affected if the failure lasts for less than 7hrs.

Extra protection can be given by covering the appliancewith two or three thick blankets.

If a long power failure is anticipated, try to get the foodstuff into another appliance or

cold store, if possible.

Prolonged off periods

If the power cut is longer than 7hrs then check the content of the freezer.

If the food has defrosted, cook and refreeze thefood or it should be eaten immediately.

Never refreeze food that has been defrosted.

Cleaning The Condenser

The condenser is the wire pipe work fitted to the rear of the appliance, this condenser must

be cleaned periodically by using a stiff brush or vacuum clearner.

This will ensure correct operation and will save energy, always unplug the appliance before

any cleaning operation.

Disconnect the appliance from the mains supply.

Pull the lamp cover forwards, to gain accesses to the lamp . Unscrew the light

bulb in an anti-clockwise direction from the holder.

Replace the bulb with one of the correct type and size (10 watt E14 base).

Replace the cover by Pushing the cover Backwards.

Reconnect the appliance to the mains supply.

Changing the light bulb

Note. Light bulbs are not covered by the warranty

If the appliance is not to be used for a long period of time then it is recommended to

remove all the food stuff, clean the inside of the appliance and leave the door open to

allow the air to circulate thus avoiding unpleasant odors.

Cleaning and maintenance

Before any cleaning or maintenance is carried out youmust disconnect the appliance

from the mains supply by removing the plug, never remove the plug by pulling on the

mains cord. Remove the plug by pulling on the plug itself.

It is recommended that when cleaning the appliance, both the inside and outside, can be

cleaned using warm water and a little bicarbonate ofsoda. Use 1 teaspoon to 1.2 litres

of water.

If the appliance is not operating correctly:

Please check the following points.

Is there a power failure? (Check by turning on a house light)

Has the fuse blown or has the circuit breaker tripped.

Has the door been closed correctly?

Check the thermostat has been set correctly.

Check the mains plug is seated in the wall socket correctly and the socket switch is on.

Check the power outlet is working, Try another appliance.

Is the room temperature too cold or too hot. ( working temperature range 16 to 32 )

If the appliance is not used for a prolonged period

If the refrigerator is not in use for a long period of time, proceed as follows:

Disconnect the refrigerator from the main supply by removing the plug from the socket.

Clean and dry the inside as instructed under the heading of cleaning the appliance.

Leave the door open to prevent any unpleasant smells from building up while the

appliance is not in use.

Before calling for service

Please check the following points:

1. The refrigerator is noisy when running

Check the appliance is level and is not in contact with another appliance or kitchen

furniture.

2. The refrigerator does not cool sufficiently.

If the door has been opened too often, or it has been left open for a while it will take

time for the appliance to reach its set temperature.

Check the air flow around the refrigerator has not been reduced due to insufficient

clearance.

NOTE: The following characteristics should not be looked upon as a problem.

A gentle trickling sound caused by coolant flowing through the pipe.

Compressor operating at high temperature.

Inhaltsverzeichnis

Sprachen:

Andere Haier Kühlschrank Handbücher

Haier

Haier AFD631CX - 2 Bedienungsanleitung

Haier

Haier HT SERIES Bedienungsanleitung

Haier

Haier C121 Bedienungsanleitung

Haier

Haier HT SERIES Bedienungsanleitung

Haier

Haier HRF-660S Bedienungsanleitung

Haier

Haier HYC-610 Bedienungsanleitung

Haier

Haier HB22FWRSSAA Bedienungsanleitung

Haier

Haier HSE02WNCWW Bedienungsanleitung

Haier

Haier HRF- 329AA Bedienungsanleitung

Haier

Haier HDE03WNAWW Bedienungsanleitung

Haier

Haier HRF360TW Bedienungsanleitung

Haier

Haier HRF520BW Bedienungsanleitung

Haier

Haier HR-245S Bedienungsanleitung

Haier

Haier HRFK-250DAA Bedienungsanleitung

Haier

Haier HOBT7719EW Bedienungsanleitung

Haier

Haier HTE10WNA Bedienungsanleitung

Haier

Haier 55 Series Bedienungsanleitung

Haier

Haier HRF-660W/U Bedienungsanleitung

Haier

Haier LSA02W Bedienungsanleitung

Haier

Haier CFL series Bedienungsanleitung

Haier

Haier HR-170T Bedienungsanleitung

Haier

Haier HRF-628AS6 Bedienungsanleitung

Haier

Haier HR-123/A Bedienungsanleitung

Haier

Haier HRF08WND Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung

Matsui

Matsui MTT50W12E Bedienungsanleitung