Haier HWT07AN1 Bedienungsanleitung

MODEL

Please read this manual carefully before

operating your washing machine and retain

it for future reference.

HWT08AN1

TOP LOAD FULL-AUTOMATIC

WASHING MACHINE

USER’S MANUAL

0030517190

HWT09AN1

HWT10AN1

HWT07AN1

CONTENTS

Product overview

Safety precautions

Installation & adjustment

Before washing

Operation

Cleaning and Maintenance

Packing list

Specification

Trouble-shooting

Description of symbols

Safety warnings

Installing the bottom plate

Balancing the washing machine

Installation of the drain hose

Installation of water inlet hoses

Check the following before washing

Loading detergent

Loading your laundry

Explanation of the display

Operation and Wash Cycles

Safety

Product overview

Outer tub cover

Top lid

Inner tub

Pulsator

Detergent tray

Base frame

Screw cover

Adjustable feet (2 pieces)

Top deck

Cabinet

Cold water inlet valve

Fixed

feet (2 pieces)

Control panel

Handle

Hook

Power cord

Back cover

Please understand the shapes of the washing machine and accessories may be

different from the sketch figures in this manual due to product improvement.

Drain hose connector

Drain pump filter cap

Hot water inlet valve

(Not to be removed by

the customer)

Description of symbols

Warning sign

Forbidden sign

Contents marked with this symbol are related to the safe use of

the product and the personal safety of the user.

Please operate in accordance with the contents of this manual

to avoid harm to the user or damage to the machine.

Contents marked with this symbol indicate operations or

actions that should not be undertaken by the user.

Performing of such actions may result in an injury to the user or

damage to machine and void the warranty.

Safety precautions

Warning

A separate, earthed power socket is

required for the power supply.

Hold the plug, not the electric cable, when

unplugging the washing machine.

Do not insert or remove the power plug with

wet hands.

The power plug should be accessible after

machine installation.

Ensure the plug is removed and the taps

are turned off in the following cases.

Power failure, cleaning, moving,

installation of the machine and when not

in use.

If the Power cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified people in order to avoid a hazard.

CAUTION: If this appliance is supplied from a cord extension set or

electrical portable outlet device, the cord extension set or electrical

portable outlet device must be positioned so that it is not subject to

splashing or ingress of moisture.

Safety

This appliance is intended to be used in household and similar applications such as:

... staff kitchen areas in shops, offices and other working environments;

... farm houses;

... by clients in hotels, motels and other residential type environments;

... bed and breakfast type environments;

... areas for communal use in blocks of flats or in launderettes;

... max. capacity 7 kg (HWT07AN1), max. capacity 8 kg (HWT08AN1), max. capacity 9 kg

(HWT09AN1), max. capacity 10 kg (HWT10AN1), water pressure 0.03-1MPa.

Safety precautions

Forbidden

If you are using an extension cord or

a portable electrical outlet device

(not recommended), ensure that it

is positioned so that it does not come

into contact with water or moisture.

Do not install this appliance in a

damp or wet environment. Do not

leave wet laundry on the Control

Panel or spray water directly onto

this appliance as this may cause the

washer to malfunction or cause an

electrical fault.

Do not wash

water-proof clothing

as this may affectload

balance during

spin cycle(s).

Do not connect to hot

water higer than

60°C temperature.

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental

capabilities, or lack of experience

and knowledge, unless they have

been given supervision or

instructionby a person responsible

for their safety. Children should be supervised to

ensure that they do not play with the appliance.

Do not take apart,

repair or alter the

machine by

yourself.

Do not attempt to remove washing or place

hands inside the washing machine while in

operation. Please ensure children are

supervised around the machine to avoid

harm.

Do not leave hot or heavy items on the lid

or control panel as this may cause

damage to the washer or make the

washer unsafe to operate.

Do not wash laundry

with chemicals or other

volatile materials(such as

petrol, solvents or thinners)

as this may cause

damage to the

machine.

Keep washer away

from heat sources

such as heater,

stoves or direct sunlight.

If power cord or other parts of this machine become damaged or faulty, please

contact a technician to have it repaired.. Do not attempt repairs by yourself as this

may cause personal harm or void warranty.

Safety precautions

Please install and adjust the machine according to the directions contained in this

manual. It is very important to follow these directions for the safe operation of the

machine, and to ensure your machine operates correctly.

Installation & Adjustment

Back

Front

Screw

Bottom plate Carpet

Installing the bottom plate

The purpose of the bottom plate is to suppress noise

from the washing machine during operation.

Steps:

2. Place the plate onto the bottom of the

machine.

3. Use a screwdriver to tighten the screw ( in accessory

bag) securing the panel to the bottom of the washer.

4. Once the screw is tight and the panel is secure, return

the washer to its standing position.

1. Tilt the machine backwards against a wall. (ensure that the

machine is well supported)

The new hose-sets supplied with the appliance are to be used and the old hose-sets

should not be reused.

Note: The washing machine has ventilation openings in the base, the product must not be

placed on a carpeted surface.

Please do not to remove the pump filter cap situated at the

bottom rear of the product in any situation as water remaining

in the product will flow directly out of the product.

In the event of a blockage or a failure to drain, please contact

the customer care centre for assistance.

The pump filter cap is only to be removed by a trained service

technician.

Pump filter cap

Installation & Adjustment

Drain hose

2. First connect the drain hose to the connection

point on the lower right side of the cabinet, and fasten

with drain hose clamp (provided).

3. Connect drain hose guide on to the outside of

drain hose. To guide the drain hose over the

tub or standpipe, the bracket MUST be fitted

to the drain hose.

Drain hose

clamp

Drain hose joint

1.The height of the standpipe or tub should be

between 0.8 - 1.2 m.

2.To avoid syphoning, the drain hose should not

extend more than 20 mm from the end of the guide.

Ensure drain hose is held in place to avoid

leaks or spills.

Bracket

0.8mh

1.2m

1. Remove the cap of the drain hose outlet.

Note: A small amount of water may come out when the cap is removed. This is

normal as there maybe some water left in the pump as the

machine is tested during manufacture.

20mm20mm

Installation on an uneven surface can lead to ‘out of balance’ events, instability in the machine

operation, or even failure to successfully complete a wash cycle.

Please refer to the following methods for adjustment:

1.Confirm whether the machine is level.

2. Lift the lid and ensure that the bowl is central to the top deck opening.

Adjust the two front leveling feet as necessary.

Balancing the washing machine

Note：The distance between the washing machine

and the wall should be at least 20mm.

Not level level

Installation & Adjustment

Connection between the water inlet hose and the

washer

1.Do not take off the water absorption cushion.

Please check if the cushion is dropped

or damaged before each usage. If this

happens please contact our after-sale

department immediately.

2.Put the nut of the water inlet hose onto the

inlet valve thread.

3.Fasten the nut.

nut of the water inlet hose

Thread of the water inlet valve

Water absorption cushion

securely fastened and can pivot as required

Check the inlet hose connections

Water inlet

1. Connect the cold hose (blue connector) to the cold

tap and the hot hose (red connector) to the hot tap.

You may have to use pliers to tighten the coupling.

Do not over tighten as this may cause damage to the

valve or hose fittings.

2. Connect the other end of the hose to the respective hot and

cold inlet valves, located at the rear of the washing machine.

3. We recommend replacing the inlet hoses every 5 years.

Hoses should be checked from time to time and replaced if any wear, damage

or leaks are found.

Preparation before washing

1.Connect the water inlet hose. Open the water faucet.

2.Insert the power plug into the wall power socket.

3.Ensure the drain hose is mounted at the correct height.

4.When the water pressure in the user's

home is too low, it may not be able to

wash detergents and softeners

effectively (which may agglomerate).

5.Please clean the detergent box when

required to maintain a clean surface.

It is suggested to dilute the detergents

before putting laundry into the inner tub. It is suggested that the softener

be diluted and put into the inner tub directly after the last rinse.

Check the following before washing

Before washing

Clear the pockets

and take out loose

items such as coins,

sand, hairpins etc.

a. Check if the laundry has any special washing instructions.

b. Divide the laundry into colour fast and non-colour fast items.

When washing jeans and

other easily colored clothes, please soak them with water first. After soaking, put into

the washing machine.

c. Separate items that do not absorb water easily and wash by hand.

Make sure the

clothes are wet before washing, such as Wool

d. For heavily soiled items, please first remove loose dirt.

f. Do not put laundry soiled with chemicals or solvents into the washingmachine.

g. When washing cotton clothes with strong water absorption, such as bed

sheets and quilt covers, it is recommended to increase the water level manually

after the default water level is completed. Increasing the water level can improve

wash performance.

Tie any long

straps or strings,

fasten buttons

and close zippers.

The weight of the laundry

shall not exceed the rated

capacity of your machine,

loosen the laundry before

placing it evenly in the tub.

Make sure the clothes are

completely placed in the

inner tub.

When the machine is

running, buttons may

cause noise.

To reduce the noise,

turn clothes inside

out or place them in

a laundry bag.

For those items that may attract lint, please turn inside out before washing.

0.8m 1.2mH

6.Before washing we recommend that a " Drum Clean" cycle is run with-

out any clothing.

Usage of detergent

How to use liquid detergent

How to use softener

The rated washing capacity refers to the largest dry

weight of a load that can be washed.

Before washing, please make sure that the water level covers the clothes. Adjust

the number of clothes according to the actual situation. The clothes load should

not exceed the height of the metal drum surface.

The thickness, size and type of clothes will influence

the actual capacity.

Do not select more than water level “Mid” for clothes

less than 2.0kg, to avoid splashing of water.

It is recommended that low suds/high efficiency

washing powder is used.

Operation

Loading your laundry

The usage and dosage of the softener should be

as per the manufacturer's instructions.

Before washing put the softener into the softener

inlet tray. See the above figure. The softener will

Do not leave softener in the softener tray for a long

time before washing or it could solidify and not

dispense correctly.

How to use washing powder

Washing powder

Remove the blue liquid tray and place the powder

detergent directly into the detergent cavity.

If you select “Express” program, it is recommended

to use liquid detergent instead of washing powder

to ensure the most effective wash results.

Old or poor quality washing powder may causing

caking in detergent dispenser.

Clean the detergent box periodically to ensure

washing power is evenly distributed and remove

any detergent build up.

Before washing, put the detergent liquid into the

detergent tray, situated on the left hand side of the

drawer, as per the figure above.

The usage and dosage of the detergent should be

as per the manufacturer's instructions.

Liquid tray

Softener inlet

be dispensed during the last rinse cycle.

Note:

before using powder detergent, please remove

"blue" liquid tray which serve only for liquid detergent.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Haier Waschmaschine Handbücher

Haier

Haier HW70-1401 Bedienungsanleitung

Haier

Haier HWM20-0701 Handbuch

Haier

Haier HLP021 - PULSATOR Portable Washer Bedienungsanleitung

Haier

Haier HWF90BW1 Bedienungsanleitung

Haier

Haier HW80-B14979 Bedienungsanleitung

Haier

Haier HW-D1470TVE ME Bedienungsanleitung

Haier

Haier HW80-1482 Bedienungsanleitung

Haier

Haier HWM70-12688NZP Bedienungsanleitung

Haier

Haier HT1006TXVE Bedienungsanleitung

Haier

Haier RWT360BW Bedienungsanleitung

Haier

Haier Twin-tub Washing Bedienungsanleitung

Haier

Haier HWM80-0566 Bedienungsanleitung

Haier

Haier HA1000TE Bedienungsanleitung

Haier

Haier XQG56-B1086 Bedienungsanleitung

Haier

Haier GWT450AW Bedienungsanleitung

Haier

Haier HLP455E Bedienungsanleitung

Haier

Haier HW-C1470TVE ME-U Bedienungsanleitung

Haier

Haier LMA9020WGAB0 Bedienungsanleitung

Haier

Haier HWT60AA1 Bedienungsanleitung

Haier

Haier XPB62-0613RU Bedienungsanleitung

Haier

Haier HVS1200ME Bedienungsanleitung

Haier

Haier HBS800TXV Bedienungsanleitung

Haier

Haier HWM8000 Bedienungsanleitung

Haier

Haier M5001T Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

Bosch

Bosch WAN2829BSN Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung