Haiwei H2 Bedienungsanleitung
Contents
Preface………………………………………………………………..1
Part Ⅰ: Connection illustrated…………………………………… …..4
Part Ⅱ: Configure network…………………………………………...4
Part Ⅲ: Encoder Functions …………………………………………6
Part Ⅳ: Operation ………..…………………………………………18
Part Ⅴ: LiveX………………………………………………...………21
Part Ⅵ: FAQ …………………………………………………………22
Part Ⅶ: Contact us ……………………………………………….. ...23
Status bar ……………………………………...…………………..6
2
Adapt network …………………………………………...………..7
Operation mode ………………………………...……..…………..8
TS Info and OSD ………………………………………...………..9
Decoding…………………………….…………………...………..10
Transcoding ……………………………………………...………..11
Video mixing ………………………………………….....………..13
Loop Through………………………………………...……..……..15
Audio ………………………………………...………………..…..16
System ………………………………………...................………..17
Encoding………………………………...………...…..…………..8
Preface
Thank you for supporting HAIWEI, who are the leading developer
of various video processing hardware for different kind of video transmission
scenarios like OTT, IPTV, Broadcasting, Video streaming, News gathering,
medical video processing and so forth.
Our products including:
ENCODER : HDMI/ SDI/ VGA/ YPBPR/ CVBS/ DVI over HTTP/ RTSP/ RTMP
(pull/ push)/ UDP Unicast O Multicast/ RTP/ SRT/ P-P (Haiwei proprietary protocol),
4G ,WIFI, Ethernet encoder
DECODER: 4K (4096*2160) IP decoder, transcoder
Transcoder: RTSP/ RTMP/ UDP/ HTTP/ HLS/ P-P/ SDK to HTTP/ HLS/ RTSP over
UDP TCP/ RTMP/ UDP Unicast Multicast/ ONVIF/ RTP/ P-P
This user manual is designed for H2 encoder, you will get following information by
reading this manual
It may leads to damage if privately disassemble the device, please read this to
Troubleshooting first, or please send us email for help!
The info of the H2
Functions of the H2
How to use H2
Reference
3
Part Ⅰ: Connection illustrated
Part Ⅱ: Configure network
DHCP suggested for new customer or will use it in different networks,
so network configuration can be ignored if parameter of the stream
configured.
If not DHCP enabled by default, please follow the following steps to
configure the network for streaming
4
1- Enter network setting
2- Enter “Properties”
3- Choose IPv4
4- Enter current IP address and DNS (if don’t know the DNS, use 8.8.8.8)
5- Add another 192.168.1.x based IP address.
6- Then reboot the encoder on the UI of “System”option.
Once the network configured, to change the IP address of the
encoder to your local IP gateway required, like following instance
5
1- Status Bar
* The detected video information, Preview and streaming URL display here, the Preview function is based on
HTML5, it means HLS need to be enabled before using this function 6
Part Ⅲ: Encoder Functions
2- Choosing operation mode
There are 5 modes can be selected
from
1- Encoding Only
2- Decoding Only
3- Encoding+ Decoding
4- Transcoding
5- Video mixing
Choose different channel to configure
2* Main+ 2* Sub
Use H.265 or H.264 for streaming
Choose H.264 profile
Set up channel name
16:9 or 4:3 aspect ratio
Change the GOP size
Set up outputvideo frame rate
Set up video bitrate
Smarting encoding
Choose CBR or VBR
Manually set up resolution or auto
Choose video resolution
Set up TS info
Disable/ Enable HTTP streaming
Edit stream name
Disable/ Enable RTSP
Disable/ Enable multicast
Disable/ Enable unicast
Disable/ Enable RTP
Disable/ Enable RTMP
Disable/ Enable SRT
Set up OSD 8
3- Setting up Encoding
6- Decoding
Decoding function will be useful
while using those modes
Decoding
Encoding+ Decoding
Video Mixing
Transcoding
There are three different feeds can be
decoded from URL to P2P and SDK
1- URL
RTSP, RTMP, UDP, HLS, HTTP
2- P2P
From another P2P encoder, see
configuration here
3- SDK
This function is used for a pair of
encoder from us, and can be used
under intranet only.
Refresh
Click to get the P2P ID
On the intranet, the ID can be input
Under P2P decoding mode.
10
Inhaltsverzeichnis
Andere Haiwei Medienkonverter Handbücher
