Hama 00178881 Bedienungsanleitung

Operating Instructions

Bedienungsanleitung

Gebruiksaanwijzing

“Disc”

Full Wireless Headset

00178881

00178911

2 1

GOperating instruction

Controls and Displays

1. Multifunction button

2. Earpad

3. Status LED of BT earphone

4. Charging box

5. On/Off button of charging box

6. Charging socket of charging box

7. Status LED of charging box

8. Battery display of charging box

Thank you for choosing aHama product.

Take your time and read the following instructions and information

completely.Please keep these instructions in asafe place for

futurereference. If you sell the device, please pass these operating

instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your

attention to specic hazards and risks.

Note

This symbol is used to indicate additional information or important

notes.

2. Package Contents

•Hama ‘Disc’ Bluetooth®headset, 1pair

•1xUSB charging cable

•1xcharging box

•Earpads, three pairs (various sizes)

•These operating instructions

3. Safety Notes

•The product is intended for private, non-commercial use only.

•Protect the product from dirt, moistureand overheating, and only

use it in adry environment.

•Do not allow yourself to be distracted by the product, for example

when driving avehicle or operating sports equipment. Always pay

attention to the surrounding trac and your environment.

•Do not drop the product and do not expose it to any major shocks.

•Do not operate the product outside the power limits given in the

specications.

•Do not open the device or continue to operate it if it becomes

damaged.

•Since the battery is integrated and cannot be removed, you will

need to dispose of the product as awhole. Do this in compliance

with the legal requirements.

•Dispose of packaging material immediately according to locally

applicable regulation.

•Do not modify the product in any way.Doing so voids the warranty.

Warning –Rechargeable battery

•Only use suitable charging devices or USB connections for

charging.

•As arule, do not charge devices or USB connections that are

defective and do not try to repair them yourself.

•Do not overcharge the product or allow the battery to completely

discharge.

•Avoid storing, charging or using batteries in extreme

temperatures.

•We suggest to fully charge the item for at least one time in two

months

Warning –Loud volume

•Using this product limits your perception of ambient

noise. Forthis reason, do not operate any vehicles or

machines while using this product.

•Always keep the volume at areasonable level. Loud

volumes, even over short periods, can cause hearing

loss.

Warning –Magnets

•This product generates magnetic elds. Persons with a

pacemaker should consult adoctor beforeusing the product, as

the pacemakers proper function could be affected.

•Do not keep any bank cards or similar cards with magnetic strips

near to the charging box or earphones. The data on the cards

could be damaged or deleted.

4. Getting Started

•Both earphones and the charging box areequipped with a

rechargeable battery.The battery must be fully charged before

using the device for the rst time.

•Youcan charge the earphones directly using the charging box

(docking station function), or charge the battery of the charging

box. This allows you to charge the earphone batteries while on the

go, without an external power supply (power pack function).

Note

Use only the supplied USB charging cable!

4.1 Charging the earphones

•Ensurethat the earphones areswitched off beforecharging them.

•Place both earphones in the charging box.

•Start charging the earphones by pressing the on/off button (5) of

the charging box.

•The status LEDs of the charging box (7) and earphones (3) arelit

redwhile the earphones arecharging.

•If charging does not start, the charge level of the charging box is

too low.Charge the charging box as described in Section 4.2.

•It takes about one hour to charge an earphone battery.

•When the batteries of both earphones arefully charged, their

status LED (3) goes out and the status LED of the charging box

(7) is constantly lit blue.

4.2 Charging the charging box

•Begin charging by connecting the included USB charging cable to

the charging socket (6) and to the USB connection of asuitable

USB charger.

•Please refer to the operating instructions for the USB charger used.

•The status LED of the charging box (7) is constantly lit redduring

charging.

•It can take up to two hours to fully charge the battery.

•When the battery is fully charged, the status LED (7) of the

charging box is lit blue.

•Disconnect allcable and mains connections after use.

Note

•If the batteries of the earphones and the charging box areempty,

the earphone batteries will be recharged rst. After that, the

battery of the charging box will be charged (the status LEDs (3)

of the earphones go out; the status LED (7) of the charging box

continues to be lit red).

•Acharging box battery that has been fully charged allows you to

completely charge both earphones about three times.

5. Operation

5.1 Switching the earphones off/on

•Turn On:

With the device off,press and hold the multifunction button (1)

for three seconds until you hear avoice say ‘Power on’. The status

LED (3) ashes blue.

•Turn Off:

With the device on, press and hold the multifunction button (1)

for four seconds until you hear avoice say ‘Power off’. The status

LED (3) willlight up in redbeforethe device turns off.

The rst time the device is turned on, pairing is automatically started

–see 5.2 Bluetooth®pairing –Headset.

5.2 Bluetooth®pairing –Headset

•First the two earphones must connect to one another.

•Ensurethat both earphones areswitched off.

•Press and hold the multifunction button (1) of both earphones

for approximately ve seconds until the status LEDs (3) begin to

alternate between ared and blue light.

•The earphones pair with one another within about ten seconds and

can then be connected to aterminal device.

•If the two earphones cannot set up aconnection within two

minutes, they will automatically switch off.

•If pairing was successful, you will hear avoice say ‘Connected’.

Note

•When the device is turned on, the earphones automatically

connect to one another.

•The left earphone is always the master.The right earphone is

guided by the information of the master.

•Therefore, when connecting the headset to terminal devices in

future, you merely have to put the master into pairing mode. The

other earphone is automatically connected.

5.3 Bluetooth®pairing with terminal device

•The earphones and the terminal device should be no further than

one metreapart. The shorter the distance, the better.

•Ensurethat both earphones areswitched on and paired with one

another.

Note –Pairing

•Make surethat your Bluetooth®-capable terminal device is on

and Bluetooth®is activated.

•Formoreinformation, please refer to the operating instructions

of your terminal device.

•Open the Bluetooth®settings on your terminal device and wait until

Hama Disc appears in the list of Bluetooth®devices found.

•Select Hama Disc and wait until this headset is listed as connected

in the Bluetooth®settings on your terminal device.

Note –Bluetooth®password

Some terminal devices requireapasswordinorder to connect to

another Bluetooth®device.

•If your terminal device requests apasswordtoestablish the

connection, enter 0000.

Note –Displays/announcements

•If pairing was successful, the status LEDs (3) ash blue every ve

seconds.

•If pairing with the terminal device was successful, you will hear a

voice say ‘Pairing successful. Second device connected’.

•In addition, avoice announces ‘connected left channel’ for

the left earphone and ‘connected right channel’ for the right

earphone.

5.4 Automatic Bluetooth®connection

(after successful pairing)

Note

•Make surethat your Bluetooth®-capable terminal device is on

and Bluetooth®is activated.

•Formoreinformation, please refer to the operating instructions

of your terminal device.

•Ensurethat the earphones areswitched on.

•Youcan only switch on the master.The master will automatically

connect to the terminal device after successful pairing. If the other

earphone is likewise switched on, it connects to the master and so

is likewise automatically paired with the terminal device.

•After the devices have been paired, aconnection is established

automatically.

•Youcan now use the headset.

Note

•If pairing was successful, the status LEDs (3) ash blue every ve

seconds.

•It may be necessary to change the settings on your terminal device

to enable it to automatically connect to the paired headset.

Note –Connection impaired

After the devices have been paired, aconnection is established

automatically.Ifthe Bluetooth®connection is not established

automatically,check the following:

•Check the Bluetooth®settings of your terminal device to see

whether it is connected to the Hama Disc headset. If not, repeat

the steps listed in Section 5.3 Bluetooth®pairing with

terminal device.

•Check whether obstacles areimpairing the range. If so, move the

devices closer together.

•The performance can also be affected by aweak battery.

5.5 Audio playback

Note

•Note that support for certain key functions may vary depending

on your terminal device.

•Formoreinformation, please refer to the operating instructions

of your terminal device.

•Functions can still be controlled directly via the terminal device.

•Set the volume on your terminal device to alow level.

•Start audio playback on the connected terminal device or press the

multifunction button (1) on one of the earphones.

•Press the multifunction button (1) on one of the earphones once

moretostop audio playback.

5.6 Hands-free function

Note

•Note that support for certain key functions may vary depending

on your terminal device.

•Formoreinformation, please refer to the operating instructions

of your terminal device.

•Functions can still be controlled directly via the terminal device.

•When you make and receive telephone calls, only the left

earphone is used for the transfer of sound; the same applies to

control of the hands-free functions.

Making acall

•Dial the number directly on your terminal device to make acall.

Accepting calls

•Press the multifunction button (1) once to answer an incoming

call.

Rejecting an incoming call

•Briey press the multifunction button (1) twice in succession to

reject an incoming call.

Ending acall

•During acall, press the multifunction button (1) once to end the call.

Redial

•Briey press the multifunction button (1) twice to call the last

number.You will hear ashort beep.

Note –Call quality

To increase the call quality,make surethat you arenear your

mobile phone during the call.

5.7 Disconnecting the headset

•Switch off both earphones.

•Disconnect the headset via the Bluetooth®settings on your terminal

device.

5.8 Battery capacity

•To save energy,the earphones automatically switch off if they are

not connected to adevice for longer than ten minutes.

•When the battery level is low,avoice says ‘Low battery,please

charge’ and the status LED (3) ashes red.

•Charge the earphones as described in Section 4. Getting started.

Note

However,the talk and standby times may vary when used with

different mobile phones or other compatible Bluetooth®devices,

usage settings, usage styles and environments.

Note –Battery display

•Each status LED of the battery display (8) corresponds to 25%

of the capacity.When an LED is illuminated, this indicates that

this capacity level has already been reached. If three LEDs are

illuminated, the charging box is at least 75% charged.

Note –Battery display

•If all four status LEDs light up, the fullcapacity is available.

•Press the on/off button of the charging box (5) to switch it on

and to display its current capacity level.

6. Care and Maintenance

Only clean this product with aslightly damp, lint-free cloth and do

not use aggressive cleaning agents. Make surethat water does not

get into the product.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hama Headset Handbücher

Hama

Hama BSH-180 Bedienungsanleitung

Hama

Hama MyVoice 1300 Bedienungsanleitung

Hama

Hama BTH-170 Bedienungsanleitung

Hama

Hama BSH-180 Bedienungsanleitung

Hama

Hama 00137423 "MyVoice3000" Bedienungsanleitung

Hama

Hama Nugget 810 Bedienungsanleitung

Hama

Hama 00104803 Bedienungsanleitung

Hama

Hama 00113744 uRAGE SoundZESSENTIAL 2 Bedienungsanleitung

Hama

Hama HA-2710 Bedienungsanleitung

Hama

Hama BSH-180 Bedienungsanleitung

Hama

Hama MyVoice 1100 Bedienungsanleitung

Hama

Hama BSH-220 Bedienungsanleitung

Hama

Hama MyVoice 600 Bedienungsanleitung

Hama

Hama 00173858 Bedienungsanleitung

Hama

Hama MyVoice2100 Bedienungsanleitung

Hama

Hama BH-2 Bedienungsanleitung

Hama

Hama BTH-200 Bedienungsanleitung

Hama

Hama 00177094 BTH Run Bedienungsanleitung

Hama

Hama 00184071 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Hama

Hama 00051826 Bedienungsanleitung

Hama

Hama GSH-300 Bedienungsanleitung

Hama

Hama Pure Series Bedienungsanleitung

Hama

Hama Triton Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung

Blueant

Blueant X5i Bedienungsanleitung