Hama 220810 Bedienungsanleitung
00
220810
TV WALL BRACKET
GOperating Instructions
Contents
1. Explanationofwarning symbols and notes ..........................3
2. Package contents.............................................4
3. Additionally required tools ......................................4
4. Safety instructions ............................................5
5. Application and specifications ...................................5
6. Preparation and assembly ......................................6
6.1 Mounting on the wall.........................................7
6.1.1 Preparing the intended mounting surface ........................7
6.1.2 Attaching the wall bracket....................................8
6.2 Mounting on the TV set .......................................9
6.2.1 Mounting the VESA plate on the back of the TV set ................10
6.3 Mounting the TV on the wall bracket ............................11
7. Adjustment&maintenance ....................................12
8. Setting options..............................................12
9. Technical data ..............................................13
10. Warranty disclaimer .........................................14
11. Service and support .........................................14
12. Warranty conditions.........................................14
GOperatingInstructions
Thank you for choosing aHama product.
Take your time and read the followinginstructions and information completely. Please keep these instructions
in asafe place for futurereference. If you sellthe device, pass on the illustrated quickstart guide and the safety
instructions in printed form tothe new owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used toindicate safety instructionsortodrawyourattention to specichazardsand risks.
Note
This symbol is used toindicate additionalinformation or important notes.
2. Package contents
•TV wallbracket
•VESA arms (2x)
•Spirit level
•Mounting kit
•Safety instructions, illustrated quick start guide
Mounting kit
A1 6x50(x4) D1 M8x12 (x4)
A2
Ø8x50 (x4)
D2 M8x20(x4)
A3 M6 (x4) D3 M8x30(x4)
B1 M6 (x4) D4 M8x50(x4)*
B2 Ø8x10 (x4) E1 M4x12(x4)
B3 Ø8x20(x4) E2 M4x20(x4)
C1 M6x12 (x4) F1 (x1)
C2 M6x20(x4)
*M8x50 +Ø8x5 =M8x45
Note
Please check the mountingkit for completeness beforeinstalling the bracket andensure thatthereare no
faulty or damaged parts.
3. Additionally required tools
8mm 10
Note
Never installthe bracket alone. Seek assistanceand help!
4. Safety instructions
Warning
•Given the multitude of terminaldevices and wallstructuresavailable on the market,the suppliedmounting
kit is unable to cover every option.
•It occasionally happens thatthe screws for attaching the device to the bracket aretoo long.
•Please note that the supplied wall plugs arefor use with solid, hollow andboardconstructionmaterials
only.
•Read the operatinginstructionsfor your terminal device beforeattempting to mount it. The instructions
provide information about thetype and measurements of suitable fastening materials.
•If the supplied mounting kit does not contain suitable fastening materialsfor mounting the terminal device,
purchase these from aspecialised dealer.
•Never apply force during assembly.This candamage your device or the holder.
•If in doubt, have this productinstalled by aqualied technician -donot attempt to installityourself!
•Do not mount the productabove locations where persons might sit or stand.
•Once you have mounted the productand theattached load, checkthattheyare suciently secureand safe
to use.
•Youshould repeat this checkatregularintervals(at least every threemonths).
•Ensurethat the product does not exceed its maximum permitted carryingcapacityand thatnoload exceeding
the maximum permitted dimensionsisattached.
•Make sure that the productisloaded symmetrically.
•Maintain the necessary safety clearancearoundthe attached load (depending on themodel).
•In the event of damage tothe product,remove the attached load and stop using the product.
•Do not attach anyadditional objectstothe product.
5. Application andspecifications
•The bracket is used for mounting at screens in private, non-commercialhouseholds.
•The bracket is intended only for use inside buildings.
•Use the bracket only for theintended purpose.
6. Preparation and assembly
Note
•Never installthe bracket alone. Seek assistance and help!
•Different end devices havedifferentconnections for cablingand otherdevices.Beforecommencing the
installation, check whether the necessary connections can stillbereached aftermounting.
•Depending on theproductand mountingmethod, you may not need allparts of the mounting kit. It is
thereforepossible that unneeded screws and other smallparts willbeleftovereven aftercorrect mounting.
Keep these in asafe placetogether withthese operating instructions foruse for later reference (saleofthe
product, movinghouse, relocation of the bracket, new TV,etc.).
Warning
•Be awarethat the brackets areonly suitable forwallmounting.
•Before installation,check thatthe wall you have chosen is suitable for the weighttobemounted. Also
make sure that thereare no electric, water, gas or other lines running through the wall at the mounting
site.
Note -Fischer plugs
The Fischer plugs supplied areapproved for the following building materials:
•Concrete
•Plasterboardand gypsum breboard
•Vertical perforated brick
•Lightweight concrete hollow block
•Hollow brick andconcrete ceilings
•Perforated sand-lime brick
•Solid sand-lime brick
•Natural stone
•Aerated concrete
•Chipboard
•Solid plaster boards
•Lightweight concrete solid block
•Solid brick
8mm
6.1 Mounting on the wall
6.1.1 Preparing the intended mounting surface
Get support and help from other people for the following assemblysteps.
8mm
60 mm
Ø8mm
•First use the bracket as atemplateand re-measureifnecessary to ensure thatthe position is correct. Use a
spirit level to checkthe horizontaland verticalalignment of the bracket on the wall.Now mark the holeson
the wall.
•To attach the wallbracket tothe wall,you need adrilland adrilling attachment with adiameterof8mm.
Make sure that the drilling attachment is suitable for the intended wall. Thedepth of the holeshould be
60mm .
•To ensureasecurehold, vacuum outthe drillholes with avacuum nozzlesothatthe drillhole is free of drill
dust. Now insert the plug [A2] intothe drillhole so that it is ush with the hole.
6.2 Mounting on the TV set
Note
•Given the multitude of terminaldevices structures available on the market,wecannot describe allpossible
mounting options here.
•Please ensurethat the bracket lays at and evenly on the back of the television.
•Use the enclosed spacer to even out any unevenness on the backofthe television.
•Ensurethat allscrews have the proper lengthand can be mounted untiltheyare hand-tight.
6.2.1 Mounting the VESAplateonthe back of the TV set
B1
B2, B3
C1,C2,
D1,D2,
D3,D4,
E1, E2
Curved TV back
C2, D2, D4,E2B1B2
++
D3, D4 B3
+
M8x50M8x45 (D4)Ø8x5
+=
Flat TV back
C1,D1, D4,E1B1
+
Youdonot need a
washerfor theD-screws
•Mount the VESA armsthe backofyour TV set.
•Note the combination of screw,washer and spacer listed above for your at or curved TV.
Inhaltsverzeichnis
Andere Hama Rack & Stand Handbücher
Hama
Hama 00049536 Bedienungsanleitung
Hama
Hama Easy Snap Bedienungsanleitung
Hama
Hama Selector 50FX Bedienungsanleitung
Hama
Hama 108720 Bedienungsanleitung
Hama
Hama Selector 50 FX Bedienungsanleitung
Hama
Hama 00118685 Bedienungsanleitung
Hama
Hama 182543 Bedienungsanleitung
Hama
Hama 095819 Bedienungsanleitung
Hama
Hama LCD/TFT - Monitor Arm Bedienungsanleitung
Hama
Hama D3012010 Bedienungsanleitung
Hama
Hama 118099 Bedienungsanleitung
Hama
Hama 049594 Bedienungsanleitung
Hama
Hama Smart Grip 2 Bedienungsanleitung
Hama
Hama TV WALL BRACKETS Bedienungsanleitung
Hama
Hama 00125121 Bedienungsanleitung
Hama
Hama 00200759 Bedienungsanleitung
Hama
Hama EASY Bedienungsanleitung
Hama
Hama 00133472 Bedienungsanleitung
Hama
Hama 118496 Bedienungsanleitung
Hama
Hama 00118489 Bedienungsanleitung
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
