HAMPTON BAY Array Revive Bedienungsanleitung
01
Over view :
REVIVE lock upgrades your existing lock by replacing the interior assembly only,
It attaches to your existing deadbolt easily.
Adapter
Interior
Assembly
Battery Cover
Back Cover
Cover Screws
Mounting Screws
(From your existing deadbolt)
Mounting Plate
02
In the Box :
Contact US :
For Installation Videos Visit:
www.doorlocks.care
REVIVE
Smart Lock
REVIVE Lock
Gateway(Optional)
Lock Adapter &
Mounting Hardware
Adhesive Strip Reset Tool Installation Guide
03
Please download the LaView App from the App Store or Scan the QR Code below.
LaView App is available for both iOS and Android OS. Search the name 'LaView' in App
Store or Google Play. ( The other LaView apps, such as LaView Connect, LaView ONE,
LaView Life do NOT support HU06 Smart Deadbolt )
Network configuration should be completed within 3 minutes after factory reset.
Notes:
Set up Bluetooth Gateway ( Required for remote access )
a. Plug the gateway into an outlet near your door ( within 50 feet ) .
b. Click ’+’ on the top right corner of the App’ s home page to find your device.
c. Follow the in-app instructions in the app to complete setup.
a. Click ’+’ on the top right corner of the App’ s home page to find your device.
b. Follow the in-app instructions and replace your existing thumbturn lock
Set up LaView H06U
Bind the HU06 to the Gateway (Required for remote access)
a. In LaView APP, enter the Bluetooth Gateway menu and click ‘ Add device by list ’
b. Select the HU06 that has just been added.
Download the APP
1
2
3
4
Setup :
04
IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .
Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences
qui peuvent causer un mauvais fonctionnement de l'appareil.
Ce matériel est complété par une exposition de rayonnements FCC pour un
environnement naturel. Ce matériel doit être installé et se faire avec une
distance minimale de 20cm entre les radiateurs et les autresYour body shop.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
05
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
V1.0
Inhaltsverzeichnis
Andere HAMPTON BAY Sperren Handbücher
