Hamworthy Trigon ST1 Bedienungsanleitung

Hamworthy Trigon

ST1 Solar Pump Station

Installation, Commissioning,

Operation & Service Instructions

IMPORTANT NOTE

THESE INSTRUCTIONS MUST BE READ

AND UNDERSTOOD BEFORE INSTALLING,

COMMISSIONING, OPERATING OR

SERVICING EQUIPMENT

Technical Enquiries

To supplement the detailed technical brochures, technical advice on the application and use of products in the Hamworthy

Heating range is available from our technical team in Poole and our accredited agents.

Site Assembly

Hamworthy offer a service of site assembly for many of our products where plant room access is restricted. Using our trained staff

we offer a higher quality of build and assurance of a boiler built and tested by the manufacturer.

Commissioning

Commissioning of equipment by our own engineers, accredited agents or specialist sub-contractors will ensure the equipment is

operating safely and efciently.

Service Contracts

Regular routine servicing of equipment by Hamworthy service engineers inspects the safety and integrity of the plant, reducing the

risk of failure and improving performance and efciency. Service contracts enable you to plan and budget more efciently.

Breakdown service, repair, replacement

Hamworthy provide a rapid response breakdown, repair or replacement service through head ofce at Poole and accredited

agents throughout the UK.

Spare Parts

We offer a comprehensive range of spare parts, providing replacement parts for both current and discontinued products. Delivery

options are available to suit you. Please refer to our website for more details.

Telephone: 01202 662555 E-mail: [email protected] Fax: 01202 662522

Customer After Sales Services

HAMWORTHY HEATING LTD Page

TRIGON SOLAR THERMAL 500001281/A

NOTE: THESE INSTRUCTIONS MUST BE READ AND UNDERSTOOD BEFORE

INSTALLING, COMMISSIONING, OPERATING OR SERVICING THIS EQUIPMENT.

THE TRIGON ST1 SOLAR PUMP STATION COMPLIES WITH ALL RELEVANT EUROPEAN DIRECTIVES.

PUBLICATION NO. 500001281

ISSUE ‘A’

JUNE 2013

Hamworthy Trigon

ST1 Solar Pump Station

Installation, Commissioning,

Operation & Service Instructions

0DNO0201 Installation-Operation ST1 Solar Pump Station 1

HAMWORTHY TRIGON

INSTALLATION AND

OPERATION MANUAL

SOLAR PUMP STATION ST1

Customer Service Centre

Hamworthy Heating Limited

Fleets Corner, Poole,

Dorset BH17 0HH l

1 General information

2 Installation-Operation ST1 Solar Pump Station 0DNO0201

Item no. 0DNO0201

Translation of the original instructions

We reserve the right to make technical changes without notice!

Printed in Germany – Copyright by Hamworthy

1 General information

0DNO0201 Installation-Operation ST1 Solar Pump Station 3

Contents

1General information.........................................................................................................4

1.1 About these instructions...............................................................................................4

1.2 About this product........................................................................................................4

1.3 Designated use............................................................................................................5

2Safety instructions...........................................................................................................6

3Assembly and installation [installer]..................................................................................8

4Commissioning [installer]...............................................................................................11

4.1 Flushing and filling the solar circuit.............................................................................12

4.2 Preparations before flushing.......................................................................................14

4.3 Flushing and filling .....................................................................................................14

4.4 Setting the solar installation (only for standard solar pumps)......................................17

5Maintenance [installer]...................................................................................................18

5.1 Draining the solar installation .....................................................................................18

5.2 Disassembly...............................................................................................................18

6Spare parts [installer].....................................................................................................19

6.1 ST1 Solar Pump Station.............................................................................................19

Controller extension..............................................................................................................20

720

Technical data

...............................................................................................................

7.1 Pressure drop characteristics ST1 Solar Pump Station..............................................21

8Function check valves [installer].....................................................................................22

9Commissioning report....................................................................................................

1 General information

4 Installation-Operation ST1 Solar Pump Station 0DNO0201

1 General information

Carefully readthese instructions before installation and commissioning. Save these

instructions in the vicinity of the installation for future reference.

1.1 About these instructions

These instructions describe the installation, commissioning, function and operation of the

TRIGON ST1 Solar Pump Station. The chapters called [installer] are intended for installers only.

For other components of the solar thermal system such as collectors, tanks, expansion vessels

and controllers, please refer to the instructions for that component.

1.2 About this product

The station is a premounted fitting group checked for leakage used to circulate the solar fluid in

the solar circuit. It is mounted on a wall bracket and fixed with clips. The solar station is

optionally equipped with a controller. It contains importantfittings and safety devices for the

operation of the installation:

•Ball valves in the flow line (1.1) and return line (5.1)

•Check valves in the flow (1.1) and return ball valves (5.1)

•Thermometers in the flow (5.2) andreturn line (1.2)

•Pressure gauge to display the installation pressure (1.6)

•Flowmeter to display the flow rate (3.3)

•Ball valve to reduce the flow rate (3.1)

•Solar pressure relief valve (1.3)

•De-aerator to easily vent the solar circuit (4.2)

•Drain (3.2) andfill valves (1.4) with hose connectors

1 General information

0DNO0201 Installation-Operation ST1 Solar Pump Station 5

1.3 Designated use

The solar station may only be used as a pump station in the solar circuit taking into

consideration the technical limit values indicated in these instructions. Due to its design the

station must be mounted and operated as described in these instructions!

Improper usage excludes any liability claims.

When the sun shines, the collector can become very hot. The solar fluid

in the circuit can heat up to more than 100 °C.

Only flush and fill the solar circuit whenthe collector temperatures are

below 70 °C.

Flow

Return

5.1 1.1

5.2 1.2

1.3

1.4

1.5

1.6

3.2

3.1

3.3

3.4

4.1

4.2

2 Safety instructions

6 Installation-Operation ST1 Solar Pump Station 0DNO0201

2 Safety instructions

The installation and commissioning as well as the connection of electrical components require

technical knowledge commensurate with a recognised vocational qualification as a fitter for

plumbing, heating and air conditioning technology, or a profession requiring a comparable level

of knowledge [installer]. The following must be observed during installation and commissioning:

•relevant local and national regulations

•accident prevention regulations of the professional association

•instructions and safety instructions mentioned in this manual

WARNING

Danger of scalding due to vapour escape!

With pressure relief valves there is risk of scalding due to vapour escape. During

installation, check the local conditions and if a discharge line must be connected

to the safety group.

Observe the instructions regarding the pressure relief valve.

The pressures calculated by the installation planner for the expansion

vessel and the operating pressure of the installation must be set.

CAUTION

Risk of burns!

The valves, fittings and the pump may heat up to more than 100 °C during

operation.

The shell must remain closed during operation.

•use appropriate personal and protective equipment eg safety glasses, gloves, etc...

2 Safety instructions

0DNO0201 Installation-Operation ST1 Solar Pump Station 7

CAUTION

Personal injury and damage to property due to overpressure!

By closing the two ball valves in the primary circuit you isolate the pressure relief

valve from the heat exchanger. A rise in temperature in the storage tank will

cause high pressures and could result in personal injury or damage to property!

Only close the ball valves for service and maintenance.

NOTICE

Material damage due to mineral oils!

Mineral oil products cause lasting damage to seals made of EPDM, whereby the sealant

properties are lost. We do not assume liability nor provide warranty for damage to property

resulting from sealants damaged in this way.

It is imperative to avoid that EPDM gets in contact with substances containing mineral

oils.

Use a lubricant based on silicone or polyalkylene and free of mineral oils such as

Unisilikon L250L and Syntheso Glep 1 of the Klüber company or a silicone spray.

Andere Handbücher für Trigon ST1

Inhaltsverzeichnis

Andere Hamworthy Wasserpumpe Handbücher

Hamworthy

Hamworthy Trigon ST1 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung