Worldwide Offices
Offices Serving North America
Skaneateles Falls, NY
Tel: +1 315 685 8945
or, in North America:
+1 800 582 4263
Charlotte, NC
Tel: +1 704 998 3998
or, in North America:
+1 800 582 4263
Offices Serving Europe,
Middle East, and Africa
Europe
Tel: +31 (0) 40 29 01 600
United Kingdom
Tel: +44 (0) 1 925 240055
Italy
Tel: +39 (0) 2 67 100752
France
Tel: +33 (0) 1 41 158220
Germany
Tel: +49 (0) 7 477 151377
Spain
Tel: +34 93 228 78 68
Offices Serving Asia and the
Pacific Rim
Hong Kong
Tel: +852 2511 3050
Japan
Tel: +813 5770 6312
Offices Serving Latin America
Naples, Florida
Tel: +1 239 263 7600
lapresales@handheld.com
São Paulo
Tel: +55 11 5016 3454
lapresales@handheld.com
Rio De Janeiro
Tel: +55 21 2176 0250
lapresales@handheld.com
Web Site Address www.handheld.com
Hand Held Products, Inc., ("Hand Held Products”)
©
1999-2004. All rights reserved. Printed in the U.S.A.
Due to Hand Held Products’ continuing product improvement programs, specifications and features herein are subject to change without notice.
QCPC600-SS Rev C 12/04
Quick Check
® PC600 Specifications
Mechanical
Standard Hardware
Configuration: Interface/Input Box, power supply, and choice of mouse scanner, available in aperture sizes of 03, 05, 06, 10, 20 mils, or pen wand in
05, 06, and 10 mils. (Choose visible or infrared for either input device.)
Plugs into PC serial port
Optical Input Connector: 9-pin plastic squeeze-to-release male
Allows input from any existing or potential future Hand Held Products interchangeable scanner (excluding laser)
I/O Connector: 6-pin modular
Allows for I/O communications with computer
Power Connector: Power jack for powering input device and interface electronics
Uses existing Hand Held Products QCAC charger
Environmental
Operating Temperature: 32 to 122° F (0 to 50° C)
Storage Temperature: 14 to 158° F (-20 to 70°C)
Relative Humidity: 5% to 95% Non-condensing
ESD Sensitivity: Withstands 20 attempts to discharge 15Kv to the unit
Sealability: Meets NEMA 1
Shock: 3 feet (91 cm) to concrete
Software
Verification Modes: RL, RD, print contrast signal
ISO/IEC reflectance parameters
Bar/Space dimensional measurement
Average bar growth/shrinkage
ISO/IEC decodability
ISO/IEC 10-scan grade averaging
Wide-To-Narrow ratio measurements
Scan profiles on CRT and printer output
Fixed message length testing
"X" dimension calculation
Scan speed variation indication
Variable or ISO/IEC symbol grade averaging
Storage of scan results and scan profiles
Ability to add notations to scan file for later retrieval
Programming Procedures: Report generator allows choice of print format. Click directly on a parameter to configure its setting
Verification Methods: Parameters determined by the ISO/IEC print quality standard or traditional pass/fail criteria
Result Indications: Visual, using an efficient graphical display
Audible using the PC speaker
Display Organization: Symbol Grade with Running Average
Scan Grade
Symbology and Symbol Data
Reflectance measurements, including RL, RD, Print Contrast, Rmin/Rmax, Minimum Edge, Contrast, Modulation, and Defects
Format parameters, including Check Digit and Message Length
Dimensional results, including Decodability, Intercharacter gap, Wide-To-Narrow Ratio, and Average Bar Error
Additional results and errors are available in a scrolling list
Symbologies Verified Code 39 (1 to 49 characters); Interleaved 2 of 5 (2 to 78 characters);EAN/UPC (-A, -E, -8 and -13) includes magnification settings in a
maximum of 16 steps consisting of: 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 130, 140, 150, 160, 180 and 200%; Codabar (1 to 61
characters); Code 128 (1 to 70 characters);Telepen
Applications: UCC/EAN-128
Safety/Regulatory FCC Class A, CE
IBM is a registered trademark of International Business Machines, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
System Requirements
•Windows 98, 2000, or Windows NT operating system
•PC (or compatible) with 486 or better processor
•4 MB of RAM
•3 MB available on hard drive
•Available COM Port (COM 1-4)
•Microsoft®-compatible mouse
