03
BEFORE YOU START
IMPORTANT SAFEGUARDS
Read these instructions carefully and
retain them for future use. If this
product is passed to a third party, then
these instructions must be included.
When using the product, basic safety
precautions should always be followed to
reduce the risk of injury including the following:
WARNING - Risk of Injury!
• The product package contains small parts,
sharp edges and sharp points. Keep
children and pets away during assembly.
• Assemble on a dry and calm day. Do not
attempt to assemble in strong wind or
extreme weather.
• Take special precautions when working on
heights, for example, while using a ladder.
Use the right type of ladder and ensure
it is structurally sound. Use the ladder
in accordance with the manufacturer’s
instructions.
• Use the drill driver properly and in
accordance with the manufacturer’s
instructions.
• The product must be rmly anchored
to a suitable base foundation to protect
against injuries and damages caused by
high winds.
CAUTION - Risk of Injury!
Two competent
persons are required
for the assembly.
CAUTION - Risk of Injury!
Sharp edges! Handle with care.
Wear work gloves, long-sleeve
top and safety goggles when
assembling the product.
• Observe and follow all the local building
ordinances. Apply for permission from local
authorities if necessary. Small sheds of less
than 100-square feet usually do not require a
permit. Always check with local authorities to
ensure your shed is up to code.
• Do not let children climb on or play around
the product.
• Always assemble the product on a rm, level
ground.
• Do not use this product if any parts are
missing, damaged, or worn.
• Do not over-tighten the fasteners.
• Store combustibles or corrosive substances
only in sealed containers approved for such
purpose.
BEFORE ASSEMBLY
DANGER - Risk of Suffocation!
Keep any packaging materials away from
children and pets – these materials are a
potential source of danger, e.g. suffocation.
• Remove all the packing materials.
• Remove and review all components before
starting assembly.
• Place all the components on a cloth or plastic
sheet to avoid damage.
• Organize all the components by the part
numbers indicated on each component and
review with the chapter “Parts List”. Note
that spare fasteners are included.
• Check all the components for transport
damages.
• Prepare all the personal protective
equipment (PPE) and all the tools required
for assembly.
SELECTING LOCATION
CAUTION
• The product must be anchored to a solid
base foundation, such as concrete slab or
treated timber.
• Do not assemble the product onto a
soft ground directly, such as lawn, soil or
gravel. For a suitable concrete or wooden
base foundation, contact an authorized
local building dealer.
