Hantek DPO6000 Series Bedienungsanleitung

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

DPO6000,MPO6000 Series

Digital Phosphor Oscilloscope

V 1.1

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 1 -

Qingdao Hantek Electronic Co.,Ltd.

Statement

Qingdao Hantek Electronic Co., Ltd. reserves the right to amend this document without

prior notice. Qingdao Hantek Electronic Co., Ltd. promises that the information provided is

correct and reliable, but does not guarantee that this document is infallible. Please make

sure that the specifications of relevant technical documents used are the latest and valid

version by yourself before using this product.If you require the cooperation of products,

patents or works of a third party when your company use the documents or products of

Qingdao Hantek Electronic Co., Ltd., your company shall be responsible for obtaining the

consent and authorization of the third party. The aforesaid consent and authorization is

not the responsibility of our company to guarantee.

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 2 -

Technical Support

If you have any question or ambiguity in the process of using products of Qingdao Hantek

Electronic Co., Ltd., you can get the service and support through the following ways:

A: Please contact the local distributor of Qingdao Hantek Electronic Co., Ltd.;

B: Please contact the local office directly under Qingdao Hantek Electronic Co., Ltd.

C: Please contact the headquarters of Qingdao Hantek Electronic Co., Ltd.

Contact Method of our company:

Qingdao Hantek Electronic Co., Ltd.

http://www.Hantek.com

Address:35# Building No.780 Baoyuan Road,High-tech District,Qingdao China

Zip Code:266114

Telephone: 0532-88705792

Fax: 0532-88705691

Email: service@Hantek.com

Technical Support:

Telephone:0532-88703687

Email: support@Hantek.com

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 3 -

Summary of general safety matters

General Safety Summary

Please review the following safety precautions carefully before putting the instrument into

operation so as to avoid any personal injury or damage to the instrument and any product

connected to it. To prevent potential hazards, please follow the instructions specified in

this manual to use the instrument properly.

Avoid fire and personal injury.

Only authorized personnel can perform maintenance.

Use Proper Power Cord.

Only the exclusive power cord designed for the instrument and authorized for use within

the local country could be used.

Connect and disconnect correctly.

Connect the probe to the oscilloscope before connecting it to the circuit being

measured;Disconnect the probe and the circuit measured before disconnecting the probe

from the oscilloscope.

Ground the Instrument.

To avoid electric shock, the instrument is grounded through the Earth lead of the power

cord. The earth lead must be connected to the ground.This product must be grounded

before connecting any input or output terminals.

Connect the probe correctly.

If a probe is used, the probe ground lead must be connected to earth ground. Do not

connect the ground lead to high voltage. Improper way of connection could result in

dangerous voltages being present on the connectors, controls or other surfaces of the

oscilloscope and probes, which will cause potential hazards for operators.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings and markers on the instrument and

check your manual for more information about ratings before connecting the instrument.

Use Proper Overvoltage Protection.

Ensure that no overvoltage (such as that caused by a bolt of lightning) can reach the

product. Otherwise, the operator might be exposed to the danger of an electric shock.

Do Not Operate Without Covers.

Do not operate the instrument with covers or panels removed.

Provide Adequate Ventilation.

Inadequate ventilation may cause an increase of temperature in the instrument,which

would cause damage to the instrument. So please keep the instrument well ventilated and

inspect the air outlet and the fan regularly.

Use Proper Fuse.

Please use the specified fuses.

Avoid Circuit or Wire Exposure.

Do not touch exposed junctions and components when the unit is powered on.

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 4 -

Do Not Operate With Suspected Failures.

If you suspect that any damage may occur to the instrument, have it inspected by the

qualified maintenance personnel.

Do Not Operate in Wet Conditions.

To avoid short circuit inside the instrument or electric shock, never operate the instrument

in a humid environment.

Do Not Operate in an Explosive Atmosphere.

To avoid personal injuries or damage to the instrument, never operate the instrument in an

explosive atmosphere.

Keep Instrument Surfaces Clean and Dry.

To avoid dust or moisture from affecting the performance of the instrument, keep the

surfaces of the instrument clean and dry.

Prevent Electrostatic Impact.

Operate the instrument in an electrostatic discharge protective environment to avoid

damage induced by static discharges. Always ground both the internal and external

conductors of cables to release static before making connections.

Handle with Caution.

Please handle with care during transportation to avoid damage to keys, knobs,

interfaces, and other parts on the panels.

Safety Notices and Symbols

Safety Terms on the Product.There may be the following terms on the product:

DANGER It calls attention to an operation, if performed, could result in injury or hazard

immediately.

WARNING It calls attention to an operation, if performed, maybe not result in injury or

hazard immediately.

CAUTION It calls attention to an operation, if performed, could result in damage to the

product or other devices connected to the product.

Safety Symbols on the Product.There may be the following symbols on the product:

Safety Warning Protective Test Ground Shell Earth Terminal

Measurement Category

DPO6000/MPO6000 series digital oscilloscopes can make measurements in

Measurement Category I.

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 5 -

WARNING

This oscilloscope can only be used for measurements within its specified

measurement categories.

Measurement Category Definitions

Measurement category I is for measurements performed on circuits not directly

connected to MAINS. Examples are measurements on circuits not derived from MAINS,

and specially protected (internal) MAINS derived circuits. In the latter case,transient

stresses are variable. For that reason, the transient withstand capability of the equipment

is made known to the user.

Measurement category II is for measurements performed on circuits directly connected

to low voltage installations. Examples are measurements on household appliances,

portable tools and similar equipment.

Measurement category III is for measurements performed in building installations.

Examples are measurements on distribution boards, circuit-breakers, wiring(including

cables, bus-bars, junction boxes, switches and socket-outlets) in fixed installations,

equipment for industrial use and some other equipment. For example,stationary motors

with permanent connection to a fixed installation.

Measurement category IV is for measurements performed at the source of a low-voltage

installation. Examples are electricity meters and measurements on primary overcurrent

protection devices and ripple control units.

Ventilation Requirement

This oscilloscope uses fan to force cooling. Please make sure that the air intake and

exhaust areas are free from obstructions and have free air. When using the oscilloscope

in a bench-top or rack setting, provide at least 10 cm clearance beside,above and behind

the instrument for adequate ventilation.

WARNING

Inadequate ventilation may cause a temperature increase which can damage

the instrument.So please keep the instrument well ventilated during operation

and inspect the intake and fan regularly.

Working Environment

Temperature

Operating: 0℃to +50℃

Non-operating: -40℃to +70℃

Humidity

0℃to +30℃: ≤95% relative humidity

+30℃to +40℃: ≤75% relative humidity

+40℃to +50℃: ≤45% relative humidity

WARNING

To avoid short circuits inside the instrument or electric shocks, please do not

operate in humid environment.

Altitude

Operating: below 3 km

Non-operating: below 15 km

Care and Cleaning

Care

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 6 -

Do not store or leave the instrument where its LCD may be exposed to direct sunlight for

long periods of time.

CAUTION

To avoid damage to the oscilloscope or probe, do not expose it to fog,liquids

or solvent.

Cleaning

Check the oscilloscope and probe regularly according to its operating conditions. Please

follow these steps to clean the external surface of the instrument:

Remove dust from outside oscilloscopes and probes with a cloth that doesn’t fluff.Please

be careful not to scratch the bright screen filter material.

Use a soft cloth dampened with water to clean the oscilloscope.For more thorough

cleaning, use 75% isopropanol as an aqueous solvent.

WARNING

To avoid damage to the surface of the oscilloscope or probe, do not use any

corrosive or chemical cleaning reagent

Product End-of-Life Handling

Recycle:

Production of the equipment requires extraction and use of natural resources. If the scrap

of this product is not handled properly,then the substances the equipment contain could

be harmful to the environment or human health. To avoid the release of such substances

into the environment and reduce the use of natural resources, we recommend you to

recycle this product appropriately to ensure that most materials are reused properly.

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 7 -

DPO6000Z/MPO6000 Series Overview

DPO6000/MPO6000 Series is a Oscilloscope featuring extremely high memory depth,

wide dynamic range, clear display,high waveform capture rate and as many as 16 kinds of

triggering functions, 5 kinds of serial decoding functions it is a useful commissioning

instrument for various fields such as communication,aerospace, defense, embedded

systems, computers, research and education.

Main features:

★1 GSa/s real-time sample rate of the analog channels; 64 Mpts standard and 128M

maximum(6000EDU series) memory depth

★1 GSa/s real-time sample rate of the digital channels

★200 MHz, 100 MHz and 80 MHz analog channel bandwidth

★4 analog channels, 16(4*4) digital channels(MPO6000 series;DPO6000 can update to

use digital channels by buying LP104 digital probe)

★2-channel/3-channel signal source(MPO6000EDU is 3-channel ),13 kinds of waveform

inside,4 sets of arbitrary waveform,200M sample rate,8Kpts waveform length

★60,000 wfms/s (dots display)/400,000 wfms/s (dots display quick acquisition mode)

waveform capture rate

★Segmented acquisition function,support to capture up to 80,000 sections

★256 grade color display

★Low base noise, 500 uV/div to 10 V/div ultra-wide vertical dynamic range

★7.0 inch WVGA (800*480) TFT LCD, with ultra-wide screen, vivid picture, low power

consumption and long service life

★7 inch capacitive touch screen,support multi-touch(touch screen is optional)

★Adjustable waveform brightness and display brightness

★Up to 16 kinds of trigger functions, including 5 kinds of protocol triggers

★Supply 5 serial decoding options

★Auto measurement of 42 kinds of waveform parameters (with statistics)

★5 bits digital voltage meter and 6 bits hardware frequency indicator function

★Bode diagram function(the oscilloscopes with signal source function can use)

★Event search function

★2-window display function

★Built-in FFT function

★Multiple waveform math operation functions【MATH】

★Standard interfaces: USB Device, USB Host, LAN

★Wifi(MPO6000EDU/DPO6000EDU can use Wifi)

★Optional interfaces: HDMI,UART,AUX

★Pass_fail /trig_out(EDU standard,non-EDU optional)

★Conform to LXI CORE 2011 DEVICE class instrument standards; enable quick,

economic and efficient creation and reconfiguration of test system

★Supports remote command control

★Built-in help to facilitate information acquisition

★Supports multiple languages

★Novel and delicate industrial design and easy operation

DPO6000，MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 8 -

This list of product models

MPO6000/DPO6000 series include the following modes. Unless otherwise specified, this

manual takes MPO6204EDU as an example to illustrate the functions and operation

methods of MPO6000/DPO6000 series.

Modes

channel

Analog

bandwidth

Signal

generator

Logic

analyzer

Wifi

DPO608XB

2/4

80MHz

DPO610XB

2/4

100MHz

DPO620XB

2/4

200MHz

DPO608XC

2/4

80MHz

25MHz*2

DPO610XC

2/4

100MHz

25MHz*2

DPO620XC

2/4

200MHz

25MHz*2

MPO608XD

2/4

80MHz

25MHz*2

4*4 LA

MPO610XD

2/4

100MHz

25MHz*2

4*4 LA

MPO620XD

2/4

200MHz

25MHz*2

4*4 LA

DPO608XEDU

2/4

80MHz

Yes

DPO610XEDU

2/4

100MHz

Yes

DPO620XEDU

2/4

200MHz

Yes

MPO608XEDU

2/4

80MHz

25MHz*3

4*4 LA

Yes

MPO610XEDU

2/4

100MHz

25MHz*3

4*4 LA

Yes

MPO620XEDU

2/4

200MHz

25MHz*3

4*4 LA

Yes

Andere Handbücher für DPO6000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hantek Prüfgeräte Handbücher

Hantek

Hantek DSO1000S Series Bedienungsanleitung

Hantek

Hantek 6000EU Bedienungsanleitung

Hantek

Hantek IDSO Bedienungsanleitung

Hantek

Hantek 6052BE Bedienungsanleitung

Hantek

Hantek DSO8072E Bedienungsanleitung

Hantek

Hantek DPO7000 Series Installations- und Betriebshandbuch

Hantek

Hantek DSO4004C Series Montage- und Wartungsanleitung

Hantek

Hantek DSO-2150 USB Bedienungsanleitung

Hantek

Hantek DPO6000 Series Bedienungsanleitung

Hantek

Hantek DSO-3004 USB Series Bedienungsanleitung

Hantek

Hantek DSO 1062B Bedienungsanleitung

Hantek

Hantek Tablet1000 Series Bedienungsanleitung

Hantek

Hantek CC-65 Bedienungsanleitung

Hantek

Hantek DSO2000 Series Bedienungsanleitung

Hantek

Hantek DSO2000 Series Bedienungsanleitung

Hantek

Hantek DPO7000 Series Bedienungsanleitung

Hantek

Hantek DSO2000 Series Bedienungs- und Wartungshandbuch

Hantek

Hantek DSO1000E Series Bedienungsanleitung

Hantek

Hantek Tablet1000 Series Bedienungsanleitung

Hantek

Hantek IDSO1070 series Bedienungsanleitung

Hantek

Hantek HT824 Gebrauchs- und Pflegehandbuch

Hantek

Hantek HT824 Bedienungsanleitung

Hantek

Hantek DSO4072 Bedienungsanleitung

Hantek

Hantek DSO8000E Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung