Hantek IDSO Bedienungsanleitung

1. CH 1: Input connector for waveform display.

2. CH 2:Input connector for waveform display.

3. EXT.: Input connector for an external trigger source. Use the Trigger menu to select the Ext.source.

4. CAL.: Probe compensation output.

5. GND.: Ground terminal.

6. Power button: Power on/off button.

7. USB PORT: Connect the B-Type Plug of USB cable to this port.

8. ANT: Antenna

9. Indications

10. Easylink: Press this button to restart the IDSO and set Wi-Fi connection mode.

There are two ways to charge the battery:

1. Connect B-Type Plug of USB cable to IDSO’s USB port. Connect A-type Plug of USB cable to poweradapter

(5V,1A).

2. Connect B-Type Plug of USB cable to IDSO’s USB port. Connect A-type Plug of USB cable to PC’s USB port.

Note:

Itis recommended to charge the rechargeable battery completely before using the oscilloscope for the firsttime.

When the battery is out ofpower, please use power adapter to charge it fora period of time before using.

IDSO device work in direct mode

When in the directmode, Apple/Andriod device is connect with the IDSO device via Wi-Fi hotspot which created

by IDSO device. IDSO device works in this mode in default.

1. Power on the IDSO.

Keep pressing power button until the power on/off indicationlights up.

2. The indication of communication USB/WIFI is slow blinking. Hotspot, creates own wireless local area

network (WLAN).

3. Connect your Apple/Andriod device with Wi-Fi hotspot. Click “SettingWi-Fi/WLAN” options, then select

Network Name of the IDSO device. The password is 1234567890. You can get Network Name from the

label of IDSO’s shell.

IDSOAPP

4. Connectthe IDSO device to a signal source.

5. Tap the IDSO app to open it. Then click “RUN” button. The scope is readyto use.

If you can’t connect it successfully, please do as the followings:

1) Close the IDSO APP.

2) Long press the Easylink button until the “USB/WIFI”LED is off, release the Easylink button. IDSO

device willreboot automatically. If the IDSO device doesn't reboot automatically, press power buttonto

reboot it manually.

3) After rebooted, the IDSO device willbe in direct mode.

USB/WIFI indication, Hotspot, creates own wireless local area network (WLAN) inWiFi mode.

The indicator keeps lighting inUSB mode and slowblinking inWiFi mode.

Batteryfull

Batterycharging

Send signals when the connectionis successful with the tablet/PC.

App connection, In Wi-Fi mode, if there is communicationlink between IDSO device and

IDSO APP, the indicator keeps lighting normally.

Power on/off. When the battery is lower than10%,the indicator is quick blinking.

When the batteryis not less than10%, the indicator is slow blinking.

IDSO device work in Indirect Mode

Whenin the indirect mode, IDSO device and iOS device communicate via a third-path Wi-Fi router.

1. If the IDSO APP is running on background, please close it firstly.

2. Connectthe iOS device to the Wi-Fi router. (SettingWi-Fi /WLAN)

3. Open IDSO App, MENU->Utility->Indirect Mode, input the router's password, press Applybutton.

4. Long press the Easylink button until the “USB/WiFi” LED off, release Easylink button. IDSO device will

reboot automatically. If the IDSO device doesn't reboot automatically, reboot it manually.

After rebooted,IDSO willconnect to the Wi-Fi router. IDSO App should pop up a tip.

Users can select work the IDSO in USB mode or WiFi mode on PC.

Firstly, please install the IDSO PC software on your Windows PC before using the scope.

1. While inWindows,insert the installation CD into the CD-ROM drive. Also you candownload the software

from Hantek website.

2. The installationshould start up automatically. Otherwise inWindows Explorer,switchto the CD-ROM drive

and run “Setup.exe”. Then install it according to installation information.

Set IDSO devicework in USB mode. In this mode, please install USB driver successfully.

Whenin USB mode, the IDSO software is connect to the IDSO device via USB cable. Only IDSO windows

software can support USB mode.

1) Power onthe IDSO. Keep pressing power button until the power on/off indicationlights up.

2) Press EasyLink buttonwithin5 seconds, thenUSB/WiFi communicationindicator keeps lighting.

If the IDSO can’t work in USB mode now, please shutdown the IDSO and repeat step 1 and 2.

3) Connect B-Type Plug of USB cable to IDSO’s USB port. Connect A-type Plug to PC’s USB port.

4) Update the driver for IDSO device. Click right mouse “MyComputer->Device Manager”and select

“Unknown Device”or other and select path of driver files to update driver for the device.

5)After USB driver is installed successfully, double click IDSO desktop shortcut to run the software, thenit

communicates with IDSO device automatically. Of communication failure, click “USB Connect”iconon the

toolbar to connect with IDSO device.

IDSO USB Connect

6) Connect the IDSO device to a signal source.

Set IDSO devicework in WiFi mode.

1) Power onthe IDSO. Keep pressing power button until the power on/off indicationlights up.

2) Set IDSO to work in WiFi direct mode(default) or WiFi indirect mode(via WiFi router).

3) Open wireless network connection, connect with IDSO’s wireless localarea network. The password

is 1234567890.

4) Double click IDSO desktop shortcut to run the software, click “WiFi Connect”icon on the toolbar to

connect with IDSO device.

WiFi Connect

5) If connect the IDSO with PC successfully, you can see “Connected”on bottom left corner on status column.

The device is readyfor use.

Time/Div

Volt/Div

Increase

Decrease

GESTURES FOR TABLET

Increase

Decrease

Qingdao Hantek

Electronic Co. Ltd.

www.hantek.com

Andere Hantek Prüfgeräte Handbücher

Hantek

Hantek Q 0203A Bedienungsanleitung

Hantek

Hantek DSO5000P Series Bedienungsanleitung

Hantek

Hantek DPO6000 Series Bedienungsanleitung

Hantek

Hantek IDSO1070 series Bedienungsanleitung

Hantek

Hantek HT2018B Bedienungsanleitung

Hantek

Hantek DSO4004C Series Montage- und Wartungsanleitung

Hantek

Hantek DSO8072E Bedienungsanleitung

Hantek

Hantek DSO-2250 USB Bedienungsanleitung

Hantek

Hantek 1008 Bedienungsanleitung

Hantek

Hantek 6022BE Bedienungsanleitung

Hantek

Hantek DSO5102P Bedienungsanleitung

Hantek

Hantek DSO-3000A Series Bedienungsanleitung

Hantek

Hantek DSO1000B Series Bedienungsanleitung

Hantek

Hantek DPO6000 Series Bedienungsanleitung

Hantek

Hantek DSO2000 Series Bedienungsanleitung

Hantek

Hantek Hantek6022BL Bedienungsanleitung

Hantek

Hantek DSO4072 Bedienungsanleitung

Hantek

Hantek DSO4000 Series Bedienungsanleitung

Hantek

Hantek Tablet1000 Series Bedienungsanleitung

Hantek

Hantek DSO8000E Series Bedienungsanleitung

Hantek

Hantek DPO7000 Series Installations- und Betriebshandbuch

Hantek

Hantek 500MSa/s Referenzhandbuch

Hantek

Hantek DSO-5200A Bedienungsanleitung

Hantek

Hantek HT360 Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung