4 5
1. Safety
Spreader acid applicators are primarily intended for
pumping and dosing fluid agricultural preservatives in
silage production. The pump feeds the preservative to
the nozzles through the hoses and the preservative is
mixed to the fodder by the nozzles.
The acid applicator can also be used as a transfer pump,
in which case the pump feeds the preservative straight
to another container through the hose.
1.1 General safety instructions
• In addition to the instructions given in the manual,
you must obey all the general safety rules concerning
mechanical working.
• Before using the applicator, make sure that the device
has been connected correctly and that covers are at
place.
• Before using the applicator, make sure that all the
hoses, couplings and nozzles connected to the system
are suited for the preservatives used.
• All operating personnel must be familiar with the
operating functions and the manual of this machine.
• Keep children and unauthorised people away while
using, assembling or maintaining the machine.
• Always stop the tractor prior to maintenance or
repairs. Apply the parking brake, remove the ignition
key and disconnect the dosing machine before
leaving the cab.
• Keep the rear window of the tractor closed while
using the acid applicator.
• Always keep enough clean rinse water on hand.
• Pump a large amount of clean water through the
system before maintenance. Always handle acids with
caution. Always use acceptable personal protective
equipment.
• Inspect the condition of the hoses and the couplings
regularly. Replace any damaged parts with new ones
immediately. Notice that even a small detrition or
corrosion may cause danger.
1.2 Handling of acids
• Familiarise yourself with the safety and handling
instructions of the preservative manufacturers.
• Always handle the acid applicator with caution and
use appropriate personal protective equipment.
• Only use the acid applicator outdoors or in spaces
with adequate ventilation.
• An acid applicator that has not been cleaned can only
be placed on a surface that is acid resistant.
1.3 Personal protection
• Use an appropriate respirator if ventilation is
inadequate.
• Use tight-fitting safety goggles to protect your eyes
and keep clean water in a bottle for rinsing out eyes.
• Use protective clothing or an apron of a sufficient size
and boots to protect from any splashing.
• Use neoprene or PVC gloves to protect hands.
