Harbor Freight Tools DOYLE CARPENTERS VISE Montageanleitung
Visit our website at: http://www.harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 21g
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright©2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 58980
Specifications
Jaw Opening 8" Maximum
Important Safety Information
1. Mount before use according to these
instructions. Improper mounting
can create hazards.
2. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during mounting and use.
3. Keep work area clean and well lit.
4. Keep bystanders out of
the area during use.
5. Verify that installation surface
has no hidden utility lines before
drilling or driving bolts.
6. Do not use when tired or when
under the influence of alcohol,
drugs or medication.
7. This product is not a toy. Do not allow
children to play with or near this item.
8. Use as intended only.
9. Inspect before every use; do not use
if parts are loose or damaged.
10. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
11. Damage could occur to your vise and/or
workpiece if you overtighten the Handle.
SAVE THESE INSTRUCTIONS.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Specify number when ordering.193175453037.
Page 3For technical questions, please call 1-888-866-5797.Item 58980
Mounting Instructions
WARNING! TO PREVENT SERIOUS INJURY: Verify that installation
surface has no hidden utility lines before drilling or driving bolts.
1. Place Vise on flat, solid surface
capable of supporting weight
of Vise and workpiece.
2. Using Vise as template, mark
four mounting holes.
3. Drill appropriated size holes
for bolts (sold separately).
4. Secure Vise with appropriate bolts,
washers and nuts (sold separately).
Operating Instructions
Note: The Quick Release Handle (2) is
to open and close the Vise rapidly.
Note: The Vise Dog (15) is to prevent
movement from a workpiece if placed
horizontally on a workbench.
1. Turn Handle (1) counterclockwise
to open Jaws.
2. Place workpiece inside Jaws.
CAUTION! Keep fingers away from
Jaws while tightening them.
3. Turn Handle clockwise to tighten
Jaws against workpiece until it is
held securely. Do not overtighten.
Maintenance
1. Keep moving parts lubricated. Wipe off
excess lubricant on Handle and Jaws.
2. Keep Jaws clean.
3. Periodically, check and tighten
mounting hardware.
Parts List and Diagram
Part Description Qty
1 Handle 1
2 Quick Release Handle 1
3 Screw 1
4 Movable Jaw 1
5 Scroll Spring 1
6 Pulley 1
7 Bolt M6x10 2
8 Spindle Nut Gland 1
9 Spindle Nut 1
10 Reversing Plate 1
11 Guide Rail 2
12 Guide Rail Plate 1
13 Washer 1
14 Stationary Jaw 1
15 Vise Dog 1
16 Washer 1
17 Set Screw 1
18 Cotter Pin 4x18 1
1
234
5
6
7
8
9
10 11
12
13
14
15
16
17
18
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we
may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement.
We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Dieses Handbuch passt für folgende Modelle
1
Andere Harbor Freight Tools Werkzeuge Handbücher
Harbor Freight Tools
Harbor Freight Tools Central Pneumatic 97728 Installationshandbuch
Harbor Freight Tools
Harbor Freight Tools DOYLE Montageanleitung
Harbor Freight Tools
Harbor Freight Tools 90360 Bedienungsanleitung
Harbor Freight Tools
Harbor Freight Tools PITTSBURGH AUTOMOTIVE 56411 Montageanleitung
Harbor Freight Tools
Harbor Freight Tools ICON 56683 Montageanleitung
Harbor Freight Tools
Harbor Freight Tools PITTSBURGH AUTOMOTIVE 63391 Montageanleitung
Harbor Freight Tools
Harbor Freight Tools 42606 Kurzanleitung
Harbor Freight Tools
Harbor Freight Tools NITROUS 98475 Bedienungsanleitung
Harbor Freight Tools
Harbor Freight Tools Pittsburgh 95122 Stücklistenhandbuch
Harbor Freight Tools
Harbor Freight Tools 95878 Stücklistenhandbuch
Harbor Freight Tools
Harbor Freight Tools HAULMASTER 59665 Montageanleitung
Harbor Freight Tools
Harbor Freight Tools 46499 Bedienungsanleitung
Harbor Freight Tools
Harbor Freight Tools MADDOX MH-DCT19 Montageanleitung
Harbor Freight Tools
Harbor Freight Tools 91670 Bedienungsanleitung
Harbor Freight Tools
Harbor Freight Tools Pittsburgh 44983 Kurzanleitung
Harbor Freight Tools
Harbor Freight Tools Bauer 21506C-B Montageanleitung
Harbor Freight Tools
Harbor Freight Tools 97028 Bedienungsanleitung
Harbor Freight Tools
Harbor Freight Tools 91510 Bedienungsanleitung
Harbor Freight Tools
Harbor Freight Tools 95654 Stücklistenhandbuch
Harbor Freight Tools
Harbor Freight Tools CEN-TECH 2458 Bedienungsanleitung
