Harbor Freight Tools Drummond 63320 Montageanleitung

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Do not return

pump to the store.

Call 1-844-416-9141

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 21c

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 63320

Before start-up, note the following:

The Pump must be connected to a GFCI-protected plug which has been installed according



CAUTION

This Pump has been evaluated for use with water only.

WARNING

IMPORTANT! For your own safety –

before starting to run the Pump, please have

the following items checked by an expert:

1. Risk of electric shock – This Pump is supplied

with a grounding conductor and grounding-type

attachment plug. To reduce the risk of electric shock,

be certain that it is connected only to a properly

grounded, grounding-type receptacle.

2. Risk of electric shock – This Pump has not been

investigated for use in swimming pool areas.

3. The electrical connections must be

protected from moisture.

4. If there is danger of flooding, the electrical

connections must be taken to higher ground.

5. Circulation of caustic fluids, as well as the circulation

of abrasive materials, must be avoided at all costs.

6. The Pump must be protected from frost.

7. The Pump must be protected from running dry.

8. Access by children should also be

prevented with appropriate measures.

9. To prevent death from electric shock,

Pump must be connected only to a

GFCI-protected outlet.

10. Do not use an extension cord with this item.

11. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

12. The warnings, precautions, and instructions

discussed in this instruction manual cannot cover all

possible conditions and situations that may occur.

It must be understood by the operator that

common sense and caution are factors

which cannot be built into this product, but

must be supplied by the operator.

Fluid Type

The Pump is designed for use with water with a maximum temperature of 77° F (25°C).

Do not use the Pump for other fluids, especially not fuels, cleaning fluids, or other chemical products.

Page 3For technical questions, please call 1-888-866-5797.Item 63320

Specifications

Electrical Rating 

Power Cord Length 6'

Maximum Flow @ 0' 1075 GPH

Maximum Head Lift @ 0 Flow 160'

Inlet Port 1" NPT Thread

Discharge Port 1" NPT Thread

Page 4 For technical questions, please call 1-888-866-5797. Item 63320

Installation

The Pump must be installed in a stationary position with either:

a. A fixed pipeline or

b. A flexible hose pipe.

Please note!

1. Do not install the Pump by suspending it

unsupported from its delivery pipe or power cord.

The Pump must be installed on a solid surface.

2. If the source water level sinks too low, unit will

begin pumping air and overheat. Operating

the Pump without an adequate water supply

will damage the Pump and voids warranty.

Power Supply

1. The Pump is equipped with a shock-

proof plug according to regulations. The

Pump is designed to be connected to a



2. Make sure that the socket is sufficiently

secured and is in excellent condition.

3. When the plug is inserted into the socket,

the Pump will be on standby.

4. WARNING: To prevent death from electric

shock, Pump must be connected only to

a GFCI-protected outlet.

WARNING! TO PREVENT SERIOUS INJURY:

If the power cord or plug is damaged, do not

use the Pump. The power cord or plug may

only be repaired by a certified electrician.

Areas of use

1. This Pump is designed to pump water only.

2. This Pump is designed to be used for:

Irrigation systems, lawn sprinkling,

and clear water transfer.

3. This Pump should NOT be used for:



Water with dirt and debris. Removing water from

swimming pools or spas. Septic or sewage systems.

4. This Pump can also be used to transfer water

(e.g. household, farming, plumbing).

Page 5For technical questions, please call 1-888-866-5797.Item 63320

Installation Instructions

1. Position Pump on solid surface.

WARNING! TO PREVENT SERIOUS INJURY: This is

NOT a submersible pump. Do not immerse in water.

2. The Pump uses 1" NPT piping (sold separately).

Purchase the necessary length of pipe, including

any needed fittings and bends. Mount the Pump

as close to the source of water as possible

and within the range of the rated Suction Lift.

The connections must be airtight. Wrap all threaded

connections with PTFE tape (sold separately).

Inlet Priming

Plug

Outlet

Pump

Body

Power

Switch

Power

Cord

Figure A: Pump Components

3. Remove the Inlet and Outlet Covers from the Pump.

4. Attach the water source to the Inlet, using appropriate

methods. The Inlet hose or pipe must be collapse-

proof to properly withstand the suction force.

5. Install a foot valve and filter (sold separately)

at the bottom of the inlet.

Pump

Bucket

full of

clean

water

Priming HosePriming Hose

Outlet PipeOutlet Pipe

Inlet PipeInlet Pipe

Foot Foot

ValveValve

Y-fitting Y-fitting

(with one valve (with one valve

for each outlet)for each outlet)

Figure B: Pump Connections

6. Attach the outlet connection to the Outlet.

A Y-fitting with dual valves (sold separately) is

helpful for priming the Pump. Refer to Figure B.

Note: A foot valve on the inlet connection is critical

to help prevent the Pump from losing prime.

Note: Check that the water source and piping

are clear of sand, dirt and debris.

7. Connect a bucket full of at least 3 gallons of water

to one side of the Y-fitting using a hose, as shown in

Figure B. (If available, a continuous water supply,

such as a spigot, may be used instead.) The bucket

must be positioned higher than the Pump’s outlet.

8. Close the valve on the outlet side of the Y-fitting, and

open the valve on the priming side of the Y-fitting.

9. Remove the Priming Plug and wait until water

starts coming out of the Priming Plug. Replace

the Priming Plug and tighten securely.

Page 6 For technical questions, please call 1-888-866-5797. Item 63320

Operation

After reading these instructions, consider the following points before starting the Pump:

1. Verify that the discharge pipe is properly connected.

2. Verify that the electrical connection



3. Verify that the electrical socket is GFCI

protected and in good condition. Test

GFCI-protected outlet before use.

4. Verify that water and moisture cannot

get near the power supply socket.

5. Verify that the Pump is installed so

as to prevent running dry.

6. To start the Pump:

a. Open the valve on outlet side of the Y-fitting.

b. Make sure your hands are dry.

c. Plug Power Cord into GFCI-protected outlet.

d. Turn on the Power Switch (I).

e. Close the valve on the priming side of the Y-fitting.

GFCI-Protected

Receptacle

GFCI Plug

NOTICE: Do not run the Pump Dry!

Turn off the Pump IMMEDIATELY if water

stops coming out of the Outlet.

7. If you operate the Pump and no water comes

out, shut the Pump off IMMEDIATELY. Check the

pipes for air-tightness. Check also that the bottom

of the Inlet pipe is underneath the surface of the

water and a foot valve is properly installed.

8. After the Pump is running properly, the priming

hose and bucket can be disconnected.

9. When finished using the Pump, turn the

Power Switch off (O), dry your hands, then

unplug the Power Cord. Follow procedures

for storage explained on the next page.

Page 7For technical questions, please call 1-888-866-5797.Item 63320

Maintenance

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Unplug the Pump from its electrical outlet before performing any

inspection, maintenance, or cleaning procedures.

1. BEFORE EACH USE, inspect the

general condition of the Pump. Check for:

• loose hardware

• misalignment or binding of moving parts

• cracked or broken parts

• damaged electrical wiring

• 

• any other condition that may

affect its safe operation.

2. AFTER USE, wipe the Pump clean with a soft,

damp cloth with soapy water. Do not use solvents.

Do not get the electrical components wet.

3. If the Pump sits idle for a period of 5 days or more, it

should be unplugged and rotated several revolutions

using a screwdriver through the middle hole of the

Fan Cover to prevent it from taking a permanent set.

4. If the Pump is used only occasionally, when

pumping is complete disconnect both suction

and outlet lines, tip Pump to drain water

from Pump cavity, and replace the Inlet

and Outlet Covers to protect the unit.

Quarterly Maintenance

The below maintenance must be performed at least once every 3 months under optimal conditions.

For frequent use, or dirty areas, more frequent maintenance is required.

1. 

2. Make sure discharge pipe is free from leaks.

3. Make sure foot valve is functioning properly.

4. Check that the water source and piping

are clear of sand, dirt and debris.

Long Term Storage

1. Drain Pump body. Disconnect both suction and

outlet lines, then tip Pump so that all water is

drained from Pump cavity. Replace the Inlet

and Outlet Covers and apply light machine

oil to metal parts to prevent corrosion.

2. Store the Pump in a dry, indoor area

out of reach of children.

3. After storage, check the Impeller to make



Page 8 For technical questions, please call 1-888-866-5797. Item 63320

Troubleshooting

Problem Possible Causes Possible Solutions

Pump runs, but

will not deliver

any water.

1. Inlet pipe not submerged.

2. Low line voltage.

3. Improper priming.

4. Clogged filter at end of

intake connections.

5. Discharge valve closed.

6. 

7. Impeller plugged.

8. 

1. Make sure bottom of inlet pipe is

underneath surface of water source.

2. Consult an electrician.

3. Re-prime according to directions.

4. Clean filter.

5. Open discharge valve.

6. 

the Pump inlet and outlet ports.

7. Have Impeller cleaned by qualified service technician.

8. Thaw pipes. Check for damage before using Pump.

Pump won’t

start or run.

1. Check power connections



2. Defective motor.

3. Cord not connected.

4. No power at outlet.

5. Fuse is blown or breaker tripped.

6. Internal damage or wear. (Carbon

brushes or switch, for example.)

1. Consult an electrician.

2. Have a qualified service technician repair or replace.

3. Check that cord is plugged in.

4. Check power at outlet. If outlet is unpowered,

turn off tool and check circuit breaker. If breaker

is tripped, make sure circuit is right capacity

for tool and circuit has no other loads.

5. Have fuse replaced by a qualified service technician.

6. Have Pump serviced by a qualified service technician.

Pump does not

deliver water at

full capacity.

1. Corroded pipes.

2. 

3. Not enough water supplied to Pump.

4. Low voltage.

1. Replace pipes.

2. 

the Pump inlet and outlet ports.

3. Enlarge inlet pipe. Check well pump system.

4. 

Excessive noise

or vibration.

Internal damage or wear. (Carbon

brushes or bearings, for example.)

Have technician service tool.

Follow all safety precautions whenever diagnosing or servicing the tool.

Disconnect power supply before service.

Page 9For technical questions, please call 1-888-866-5797.Item 63320

PLEASE READ THE FOLLOWING CAREFULLY



IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE



STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available

individually as replacement parts. Specify UPC 193175314802 when ordering parts.

Page 10 For technical questions, please call 1-888-866-5797. Item 63320

Parts List and Diagram

Parts List

Part Description Qty.

1 Bolt 8

2 2

3 Pump Body 1

4 Guide Disk 1

5 O-Ring 1

6 Venturi Tube 1

7 Nut 1

8 O-Ring 1

9 Pump Support Cover 1

10 Water Proof Ring 1

11 Pump Support 1

12 Handle 1

13 Motor Housing 1

14 Stator 1

15 Ball Bearing 1

16 Rotor 1

17 Ball Bearing 1

18 Gasket 1

19 End Plate 1

20 Bolt 4

21 Fan 1

22 Circlip 1

23 Fan Cover 1

Part Description Qty.

24 Bolt 4

25 Drain Plug 1

26 O-Ring 2

27 Pad 1

28 Impeller 1

29 Mechanical Seal 1

30 End Cap 2

31 Screw 2

32 Seal 1

33 Terminal Box 1

34 Capacitor 1

35 Seal 1

36 Bolt 2

37 Terminal Box Cover 1

38 Seal 1

39 Power Switch 1

40 Bolt 4

41 Power Cord Sheath 1

42 Power Cord 1

43 Cord Clip 1

44 Bolt 4

45 Pin 1

46 Priming Plug 1

Andere Handbücher für Drummond 63320

Inhaltsverzeichnis

Andere Harbor Freight Tools Wasserpumpe Handbücher

Harbor Freight Tools

Harbor Freight Tools Drummond 57038 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools PacificHydroStar Montageanleitung

Harbor Freight Tools

Harbor Freight Tools 47664 Installationshandbuch

Harbor Freight Tools

Harbor Freight Tools Central Hydraulics 40611 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools creekstone 63313 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools DRUMMOND 56701 Montageanleitung

Harbor Freight Tools

Harbor Freight Tools Pacific Hydrostar 68422 Montageanleitung

Harbor Freight Tools

Harbor Freight Tools 93662 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools 3878 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools PacificHydrostar 68387 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools DRUMMOND 63323 Montageanleitung

Harbor Freight Tools

Harbor Freight Tools creekstone 63402 Bedienungsanleitung

Harbor Freight Tools

Harbor Freight Tools Drummond 63320 Montageanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung