Harken Protexit Blocks Bedienungsanleitung

INSTRUCTIONS

Protexit™Blocks

WARNING! Strictly follow all instructions to avoid an accident, damage to your

vessel, personal injury or death. See www.harken.com/manuals for additional

safety information.

USA –Tel: (+01) 262-691-3320 • Web: www.harken.com • Email: [email protected]

Italy –Tel: (+39) 031.3523511 • Web: www.harken.it • Email: techser[email protected]

Features

Strong, durable unibody top/side plates - hardcoat anodized forged aluminum.

Sculpted top plate - protects sheave and sheds line.

Tough sheaves - machined from hardcoat anodized solid aluminum.

Proven bearing system - composite sleeve bearing with sideload ball bearings.

High load drop-in replacement - 30 mm blocks replace Bullet® blocks. Larger blocks fit common

cutout and hole spacing allowing easy replacement.

Terms

Reeving side

Part number

Maximum line diameter

Maximum working load

Sheave

Sideplate

Block Loading vs Angle of Deflection

180°

150°

30°

90°

Block load increases when the line turns at a greater angle. Block loads double when the line turns

180°. If there is 400 kg (880 lb) on the line and the angle of deflection is 180°, the Harken through-

deck block is subject to 800 kg (1760 lb). Select blocks carefully. See specification chart on

next page. Angle of

deﬂection Load factor

Angle of

deﬂection Load factor

Angle of

deﬂection Load factor

30° 52% 90° 141% 150° 193%

45° 76% 105° 159% 160° 197%

60° 100% 120° 173% 180° 200%

75° 122% 135° 185% ——

Top plate

Specifications

*Tip: When selecting line diameter, use one

size smaller for smooth-running blocks. C

Part

No.

A - Sheave

diameter and

description

B -

Fasteners

(FH)

C - Hole

spacing

Top plate dimensions

F - Depth G - Maximum

working load

Breaking

loadD - Length E - Height

mm in mm in mm in mm in mm in kg lb kg lb

1200 30 mm single 5 #10 57 2.24 74.6 2.94 24.8 .98 20.5 .81 250 551 500 1103

1201 30 mm double 5 #10 79 3.12 97.1 3.82 24.8 .98 20.5 .81 250 551 500 1103

1202 40 mm single 6 1/4 83 3.27 106.7 4.20 24.1 .95 30.2 1.19 400 882 800 1764

1203 50 mm single 6 1/4 90 3.54 116.8 4.60 28.6 1.13 40.3 1.59 800 1764 1600 3528

1204 60 mm single 8 1/4 105 4.13 128.6 5.06 28.6 1.13 50.5 1.99 1200 2646 2400 5292

Part

No. Description

Sideplate Dimensions Cutout Dimensions

H - Width I - Length J - Width K - Length

mm in mm in mm in mm in

1200 30 mm single 17 .67 44.5 1.75 18.2 .72 45.7 1.80

1201 30 mm double 17 .67 68.8 2.71 18.2 .72 70.1 2.76

1202 40 mm single 18.4 .73 57.9 2.28 19.7 .78 59.2 2.33

1203 50 mm single 22 .87 70.2 2.76 23.3 .92 71.5 2.81

1204 60 mm single 23 .91 82.75 3.26 24.3 .96 84.0 3.31

Max line Ø*

Part Description mm in

1200 30 mm single

8 5/16

1201 30 mm double

1202 40 mm single

1203 50 mm single 12 1/2

1204 60 mm single

Warranty

For additional safety, maintenance, and warranty information see www.harken.com/manuals or the

Harken catalog.

M1024 04-18

Maintenance

Harken equipment is designed for minimal maintenance. However, some upkeep is required to give

the best service and comply with the Harken limited warranty.

Keep your equipment clean and free-running by frequently ﬂushing with fresh water. Periodically

clean with mild detergent and water solution. Spin sheaves to distribute soap solution evenly.

Flush with fresh water.

IMPORTANT! Exposure to some teak cleaners and other caustic solutions can result in

discoloration of part and is not covered under the Harken warranty.

General Maintenance

Periodically clean with mild detergent and water solution. Spin sheave to distribute soap solution

evenly. Flush with fresh water.

Note: Sheave is not removable.

Periodically inspect all fasteners to make sure they are secure.

Andere Harken Sicherheitsausrüstung Handbücher

Harken

Harken Ti-Lite Carbo AirBlock 351 Bedienungsanleitung

Harken

Harken NINJA MULTIASCEND Bedienungsanleitung

Harken

Harken ACCESS RAIL INCAR1-CURVE Bedienungsanleitung

Harken

Harken R27 Bedienungsanleitung

Harken

Harken 944 Bedienungsanleitung

Harken

Harken R27 Bedienungsanleitung

Harken

Harken SNATCHET INSN65R Bedienungsanleitung

Harken

Harken T2 2146 Bedienungsanleitung

Harken

Harken T2 2146 Bedienungsanleitung

Harken

Harken Access Rail R27 LS Bedienungsanleitung

Harken

Harken E2700 Bedienungsanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung