Harman AMX DUX-8D Bedienungsanleitung
USER MANUAL
DUX-8D
8×8 HDMI Matrix
• 4K@60Hz 4:4:4 18Gbps
• De-Embedded Audio
• Four HDBT Output
2USER MANUAL - DUX-8D
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 03
1. INTRODUCTION............................................................................................................... 04
2. PACKING LIST ................................................................................................................. 05
3. SPECIFICATIONS............................................................................................................. 06
4. PANEL OVERVIEW........................................................................................................... 07
4.1 Front Panel .............................................................................................................. 07
4.2 Rear Panel ............................................................................................................... 07
5. INSTALLATION AND WIRING .......................................................................................... 08
5.1 Installation............................................................................................................... 08
5.2 Ventilation................................................................................................................ 08
5.3 Wiring...................................................................................................................... 09
6. CONTROL OF THE MATRIX ............................................................................................. 11
6.1 Front Panel Control.................................................................................................. 11
6.2 IR Remote Control................................................................................................... 12
6.3 LAN Control (via Web UI) ........................................................................................ 13
6.3.1 Matrix Control ............................................................................................... 14
1) Switch...................................................................................................... 14
2) Preset ...................................................................................................... 15
6.3.2 Admin Setting ............................................................................................... 16
1) CEC Setting.............................................................................................. 18
2) EDID Setting ............................................................................................ 18
3) HDCP Support ......................................................................................... 19
4) Port Naming ............................................................................................ 20
5) Preset Name ............................................................................................ 20
6) Network ................................................................................................... 21
7) Change Password.................................................................................... 21
8) Update Web UI......................................................................................... 22
9) Log .......................................................................................................... 23
10) Custom Web UI Logo ............................................................................ 23
11) Reset All Settings to Default .................................................................. 24
12) Firmware................................................................................................ 24
6.4 RS232 Control......................................................................................................... 25
7. IR PASS-THROUGH......................................................................................................... 26
8. RS232 PASS-THROUGH.................................................................................................. 28
9. EDID MANAGEMENT ....................................................................................................... 30
Copy EDID Settings Using Front Panel Controls ........................................................... 30
APPENDIX 1: API COMMAND.............................................................................................. 31
3
USER MANUAL - DUX-8D
IMPORTANT SAFETY INSTRUCTIONS
NOTE: We reserve the right to change the content from time to time without
notice.
WARNINGS: To reduce the risk of fire, electric shock or product damage, please
observe the following Safety Instructions while installing and operating the
product:
Do not expose this apparatus
to rain, moisture, dripping or
splashing. No objects filled with
liquids, such as vases, shall be
placed on the apparatus.
To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
Do not place sources of naked
flames, such as lighted candles,
on the unit.
Clean this apparatus only with
dry cloth.
Protect the power cord from
being walked on or pinched
particularly at plugs.
Refer all servicing to qualified
service personnel.
Unplug this apparatus during
lightning storms or when un-
used for long periods of time.
Only use attachments/accesso-
ries specified by the manufac-
turer.
Do not install or place this
unit in a bookcase, built-in
cabinet or in another confined
space. Ensure the unit is well
ventilated.
4USER MANUAL - DUX-8D
1. INTRODUCTION
DUX-8D HDMI Matrix, or the Matrix, comes with HDMI 2.0 and HDCP 2.2 compatibility,
and allows eight sources to be switched to eight local displays through HDMI outputs
and four remote displays through HDBT outputs (Four HDBT Outputs mirror HDMI
Outputs 1-4). DUX-8D also provides analog audio de-embedding for every HDMI output.
DUX-8D allows control through front panel buttons, IR Remote, RS232 and LAN (for
Telnet API or Web UI control). Independent DIP switch is also provided for advanced
EDID management.
Designed for 1U rackmount and stand-alone installation, DUX-8D offers the convenience
of future-ready Ultra HD A/V switching and distribution solution, and the reliability of
cutting-edge HDMI 2.0 and HDCP 2.2 compatibility.
Features
HDMI Inputs and Outputs support up to 4K@60Hz 4:4:4 8bit.
HDBT Outputs support up to 4K@60Hz 4:2:0 8bit.
HDBT transmits 4K@60Hz 4:2:0 8bit signal up to 70 meters, 1080P signal up to
100 meters via a Cat5e/6 cable.
HDBT transmits 4K@60Hz 4:2:0 8bit signal up to 100 meters, 1080P signal up to
100 meters via a Cat6a/7 cable.
Fully compliant with HDMI 2.0.
HDCP 2.2 compliant.
Supports 4K HDR.
Supports analog audio de-embedding for each HDMI output.
Four HDBT Outputs mirror HDMI Outputs 1-4.
Supports front panel, IR, RS232 and LAN (Telnet API & Web UI) control options.
Supports IR pass-through and RS232 pass-through.
Independent DIP switch for advanced EDID management.
5
USER MANUAL - DUX-8D
2. PACKING LIST
1 x DUX-8D
1 x AC Power Cord
1 x IR Remote Handset (38 kHz)
1 x IR Receiver Cable (38 kHz)
4 x Broadband IR Receiver (30 - 50 kHz)
1 x USB to UART Cable
8 x Phoenix Male Connectors (3.5 mm, 3 pins)
4 x Phoenix Male Connectors (3.81 mm, 3 pins)
4 x Earphone cable with Phoenix Female Connectors (3.81 mm, 3 pins)
2 x Mounting Brackets
1 x User Manual
6USER MANUAL - DUX-8D
3. SPECIFICATIONS
Technical
Input / Output Connections
8 x HDMI IN
8 x HDMI OUT
8 x AUDIO OUT
4 x IR IN.
4 x RS232 Jack Port
4 x HDBT OUT
1 x IR EXT.
1 x LAN
1 x RS232 DB9 Port
1 x EDID DIP Switch
1 x AC IN
Input / Output Video Type HDMI 2.0
HDCP 2.2
Input / Output Resolution
800x6008, 1024x7688, 1280x7206,8, 1280x7688, 1280x8008,
1280x9608, 1280x10248, 1360x7688, 1366x7688, 1440x9008,
1600x9008, 1600x12008, 1680x10508, 1920x10806,8,
1920x12008, 3840x2160P2,3,5,6,8 ,4096x21602,3,5,6,8
1 = @ 23.98 Hz, 2 = @ 24 Hz, 3 = @ 25 Hz, 4 = @ 29.97 Hz,
5 = @ 30 Hz, 6 = @ 50 Hz, 7 = @ 59.94 Hz, 8 = @ 60 Hz
Audio Format
• HDMI: Support all known HDMI audio formats including
PCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
Dolby Atmos, DTS-HD Master Audio and DTS:X;
• Phoenix Audio Out: PCM 2.0;
Control
Control Methods IR, Front panel, RS232, LAN (Telnet API & Web UI)
General
Operating Temperature & RH 32°F ~ 113°F (0°C ~ 45°C), 10% ~ 90% (non-condensing)
Storage Temperature & RH -4°F ~ 140°F (-20°C ~ 70°C), 10% ~ 90% (non-condensing)
ESD Protection
Human-body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply AC 100~240V 50/60Hz
Power Consumption 1018p: 80W
4K: 100W
Dimensions (W x H x D) 482.6mm x 323.5mm x 43.5mm (With mounting brackets)/
440mm x 323.5mm x 43.5mm (Without mounting brackets)
Weight 3.98kg
Rack Space Required 1U
Certification CE, FCC
7
USER MANUAL - DUX-8D
4. PANEL OVERVIEW
4.1 Front Panel
DUX-8D
1 2 3 4 5
Item Name Description
1 Output Channel Indicator Indicates input for output port 1-8.
2 IR Receives signals from IR Remote.
3 Selection Buttons (White LED)
Selects input and output channels.
• Left/Right: selects output channels.
• Up/Down: selects input channels.
4 Enter Button (White LED) Press to implement the input and output selection.
5 Power Switch Turns on/off the Matrix.
4.2 Rear Panel
1 2 3 4 5 6
7 8 9 10 11
Item Name Description
1 LAN Uses RJ45 port. Connects to a control system for Web UI and Telnet
control.
2 RS232 Uses DB9 port. Connects to a control system for RS232 pass-through.
3 IR IN 1-4 Connects the Broadband IR Receiver Cable provided.
4 RS232 1-4 Uses a 3.5 mm jack socket. Connects the earphone cable provided.
5 HDBT OUT 1-4 Uses RJ45 port. Connects to a receiver via a CatX cable.
6 AUDIO OUT 1-8 Audio de-embedded output. Uses Phoenix female conntors for L/R
analog audio output.
7 AC Connects the power cord provided. Accepts AC power of 100~240V
50/60Hz.
8 HDMI IN 1-8 Connects to HDMI sources.
9 HDMI OUT 1-8 Connects to HDMI display devices.
10 IR EXT. IR extension port. Connects the IR Receiver Cable provided.
11 EDID Uses DIP Switch for EDID management.
8USER MANUAL - DUX-8D
5. INSTALLATION AND WIRING
5.1 Installation
CAUTION: Before installation, please ensure the Matrix is disconnected from the
power source.
DUX-8D occupies 1U space and can be placed on a solid and stable surface or installed
on a standard equipment rack.
To install the Matrix on an equipment rack:
1. Discharge any static electricity from your body by touching a grounded metal
object.
2. Position and install the mounting brackets using the mounting screws provided.
Brackets attach at the side
toward the front of the Matrix
3. Install the Matrix in the mounting rack by using the mounting screws to affix the
Matrix to the rack.
4. Connect any applicable wires to the device. (For detailed information of wiring,
please refer to 5.3 Wiring.)
CAUTION: DO NOT place other units directly on top of the Matrix when it is rack
mounted, as this will place excessive strain on the mounting brackets.
CAUTION: When adopting rackmouting, distribute the units evenly. Otherwise,
hazardous conditions may be caused by an uneven weight distribution.
CAUTION: Reliable earthing of rack-mounted equipment should be maintained.
5.2 Ventilation
ALWAYS ensure the Matrix is adequately ventilated. Do not block any ventilation
openings. Sufficient airflow must be achieved (by convention or force-air cooling) to
satisfy the ventilation requirements of all the equipment installed within the rack.
NOTE: The maximum operating temperature of the Matrix is 45°C (113°F).
9
USER MANUAL - DUX-8D
NOTE: The Matrix shall not be installed in enclosed spaces. It is recommended
that you leave 1U space above the Matrix when you install it in a rack.
5.3 Wiring
NOTE: Please use cables provided by the manufacturer and high-quality cables
recommended by the manufacturer.
WARNING: Please ensure all the units are DISCONNECTED from power before
setting up. Otherwise, circuitry damage or physical injury may be caused.
To complete wiring of the Matrix (Please see “System Wiring” on Page 10) :
1. Connect HDMI IN: Connect HDMI IN 1-8 of the Matrix to 4K or HD source devices
(e.g. laptop, Blu-Ray player, game console, satellite/cable TV, music streaming
device, etc.).
2. Connect HDMI OUT: Connect HDMI OUT 1-8 of the Matrix to HDMI IN of 4K or HD
displays or scalers (e.g. DUX-SCL).
3. Connect HDBT OUT (for long-distance signal transmission): Connect HDBT OUT
1-4 of the Matrix to Receivers (e.g. DUX-RX or DUX-SRX).
4. Connect AUDIO OUT: Connect AUDIO OUT 1-8 of the Matrix to audio devices (e.g.
audio amplifier).
5. Connect for additional control options:
a) IR control: The IR Remote provided is for controlling the Matrix through
infrared signal. If IR extension is required, connect the IR Receiver Cable provided
to the IR EXT port of the Matrix and position the receiver eye in a place accessible
to the Matrix Remote.
b) LAN control (through Web UI or Telnet): Connect the Matrix to the same
network as the control laptop or control system (e.g. NX-2200) via its LAN port.
c) RS232 control: Connect a control laptop or control system (e.g. NX-2200) to
RS232 port of the Matrix.
6. Power on: Connect the AC power cord provided and switch on the power button.
The Matrix is ready for operation when the front panel LEDs shows the model
name.
NOTE: ALWAYS power off the Matrix before plugging or unplugging any cables.
NOTE: Please follow the “LAST ON FIRST OFF” rule when turning on and off the
system.
Now you can switch between sources and displays by using the Matrix through either
IR Remote, front panel, RS232 or LAN. For detailed control instructions, please refer to
Chapter 6 “CONTROL OF THE MATRIX”.
10 USER MANUAL - DUX-8D
Receiver
(e.g. DUX-RX)
(Optional)
(Optional)
Scaling Receiver
(e.g. DUX-SRX)
Laptop Apple TV
Blu-ray Player 4K Media Player
HDMI Signal HDMI Signal HDMI Signal HDMI Signal
HDMI Signal HDMI Signal
HDMI Signal HDMI Signal
HDMI Signal
HDMI Signal
HDMI Signal
Display 1
IR Signal
Display 2
Projector 1
Audio SignalHDBT Signal HDBT Signal Audio Signal Audio SignalEthernet Signal
RS232 Signal
Ethernet Switch
Control System (e.g. NX-2200)
Remote
IR Receiver
Scaler
(e.g. DUX-SCL)
Display 3
1
OUTPUT1
OUTPUT2
OUTPUT3
OUTPUT4
OUTPUT6
OUTPUT5
OUTPUT7
OUTPUT8
2
3
4
5
6
7
8
SOURCESELECT
Amplifier
Speakers
Display 4 Projector 2
WEB UI
Ethernet
Ethernet
Laptop
Application Example: System Wiring
Inhaltsverzeichnis
Andere Harman Matrix-Umschalter Handbücher
