Harman JBL PROFESSIONAL PD Series Bedienungsanleitung

JBL PD6000 SERIES README FILE

INTRODUCTION

JBL PD6000 Series presets are designed to provide optimum system performance for the PD6000 Series

loudspeakers when used with Crown -Tech HD, -Tech 4x3500HD and DriveCore nstall Network Series

(DCiN) amplifiers.

Disclaimer: PD6000 limiter settin s are intended to provide a startin point for optimum system

performance while ensurin reliable system protection. The end user is, however, ultimately

responsible for system operation in the field and standard warranty conditions apply in the event of

component dama e.

PROGRAMMING GUIDELINES

Before downloading the PD6000 device and speaker tuning files, please check for the latest version of

HiQnet Audio Architect Software on http://hiqnet.harmanpro.com/downloads.php

After downloading and installing Audio Architect software, JBL PD6000 device files are located in the

following directory:

\\My Documents\Harman Pro\JBLDeviceFilesAndPreset–AA1.XX\ nstalledSound\PD6000 Series

INSTALLING DSP INTO I-Tech HD and I-Tech 4x3500HD DEVICES

To load presets into your -Tech HD amplifier, it is possible to copy the device file onto a USB key and

manually load the entire device file or individual presets from the front panel of the unit. Please see

your Crown -Tech HD manual for complete details.

Presets can also be downloaded using Audio Architect or by establishing network connectivity then

performing the following steps:

Audio Architect:

1) Wait for Audio Architect to discover the devices (as indicated in Venue Explorer to the left of the

venue):

a. f auto-populate is enabled, wait for the venue to populate with the discovered devices

b. f auto-populate is not enabled, drag and drop the discovered devices into the venue

from the Venue Explorer

2) Double-click the -Tech HD power amplifier to be programmed

3) On the amplifier menu bar, select: File / Open / Device File

4) Navigate to the ‘PD6000 Series’ device file folder

5) Select the device file suitable for your application:

6) ‘Name Change’ panel opens: f you wish to update the amplifier name, select ‘Replace’

7) Go online by selecting ‘Go Online’ on the top ribbon under ‘Offline Design’. (Note: if you are

already online, the device file will load automatically)

8) Select ‘S’ (send) for the relevant amplifier to send DSP setting to the device.

For detailed information on loading/opening PD6000 device files see the Audio Architect Help files.

PRESET RECALL INSTRUCTIONS

1) Double-click the desired -Tech HD amplifier

2) Select ‘Recall’ on the top of the amplifier panel

3) Select the desired preset for your application and press ‘OK’

4) The desired preset will load within a few seconds

Manually via the front panel for I-Tech HD

1) Press the ‘Menu/Exit’

2) Press ‘Next’ two times to navigate to the ‘Preset’ menu

3) Use the rotary knob next to the display panel to scroll through the presets until the desired

preset is highlighted.

4) Press the rotary knob to select. A prompt ‘Confirm Load (Press & Hold)’ will appear. (Note: this

will change to ‘change cancelled’ after approximately 3 seconds)

5) Press and hold the rotary knob for 1-2 seconds, until ‘Loading Preset…’ is displayed

6) ‘Preset Loaded’ message appears for several seconds, after which the current preset name will

be displayed

7) Press ‘Menu / Exit’ to navigate back to the main menu

Manually via the front panel for I-Tech 4x3500HD

1) Press ‘Menu/Exit’

2) Highlight ‘1. Presets’ by either using the rotary knob to the left of the screen or the arrows on

the screen.

3) To select, either press the rotary knob to touch ‘1. Presets’ on the screen

4) Touch ‘Recall’ on the screen

5) Scroll through the presets until the desired preset is highlighted in the middle of the screen by

either turning the rotary knob, pressing ‘Prev’ and ‘Next’ buttons to the right of the screen or

touching and dragging the presets on the screen

6) To select, either press the rotary knob or touch the desired preset on the screen

7) A prompt will display: ‘Do you want to recall Preset <Number>:<Preset Name>?’. To select,

press either the rotary knob, the ‘Menu / Exit’ button or the green checkbox symbol to the

bottom left of the screen

8) Once the preset is loaded, the active preset name will display

9) Press ‘Menu / Exit’ twice to navigate back to the main display

For detailed information on recalling and storing presets, see the Audio Architect Help files.

INSTALLING DSP INTO DCiN DEVICES

DCiN amplifiers utilize ‘Speaker Tuning’ Libraries. This allows for superior flexibility in programming the

DCiN amplifier with regard to channel assignments. Each preset represents a single DSP channel and can

be loaded onto any DCiN amplifier channel.

t is recommended that DCiN series amplifiers are set to 28dB amplifier gain. This can be set via the

following steps:

1) Wait for Audio Architect to discover the devices (as indicated in Venue Explorer to the left of the

venue):

a. f auto-populate is enabled, wait for the venue to populate with the discovered devices

b. f auto-populate is not enabled, drag and drop the discovered devices into the venue

from the Venue Explorer

2) Double-click the DCiN power amplifier to be programmed

3) Double-click CH1 nput block

4) Double-click ‘ nput Configuration’

5) Under ‘Analog nputs’ and ‘Gain Mode’ select 28dB

To load DSP data into DCiN amplifier channels:

6) With the main amplifier panel open, on the top menu bar select: File / Open / Speaker Tuning

7) Select the Speaker Tuning library suitable for your application

8) On the main amplifier panel, double-click the ‘SPKR’ panel

9) Select ‘Recall’

10) Under ‘Preset’ highlight and select the desired preset for the selected amplifier channel and

select ‘OK’. The selected DSP is now loaded onto that amplifier channel. Repeat this for all

amplifier channels as needed.

11) f not already online, go online by selecting ‘Go Online’ on the top ribbon under ‘Offline Design’.

12) Select ‘S’ (send) to send DSP setting to the device. (Note: presets can be loaded in both ‘Online’

and ‘Offline’ mode)

PRESET STORE AND RECALL INSTRUCTIONS

Once each channel has been programmed with the correct ‘Speaker Tuning Preset’, all the channels can

be stored as an overall amplifier preset. These presets can be saved as a ‘Device File’ which contain up

to 20 discrete presets.

1) To store an amplifier preset, select ‘Store’ to the right of the preset name from the main

amplifier page.

2) Type in the preset name and select ‘Store’ to store the preset.

3) To Recall a previously stored amplifier preset: Double-click the desired DCiN amplifier

4) Select ‘Recall’ on the top of the amplifier panel

5) Select the desired preset for your application and press ‘OK’

6) The desired preset will load within a few seconds

Please refer to the appropriate PD6000 preset summary sheet to determine the correct preset to use

for your configuration.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harman Sprecher Handbücher

Harman

Harman JBL PARTYBOX 100 Bedienungsanleitung

Harman

Harman REVEL PERFORMA Be4 C426Be Bedienungsanleitung

Harman

Harman JBL Intellivox ADC-V90 Bedienungsanleitung

Harman

Harman JBL PARTYBOX ON-THE-GO ESSENTIA Bedienungsanleitung

Harman

Harman JBL PRX600 Series Bedienungsanleitung

Harman

Harman JBL CONCERT 421F Bedienungsanleitung

Harman

Harman JBL STAGE Series Bedienungsanleitung

Harman

Harman JBL STADIUM 6 Bedienungsanleitung

Harman

Harman JBL CRUISE Bedienungsanleitung

Harman

Harman Harman/Kardon ONYX STUDIO 5 Bedienungsanleitung

Harman

Harman JBL GO VM Bedienungsanleitung

Harman

Harman JBL PARTYBOX310 Bedienungsanleitung

Harman

Harman JBL DD65000 Bedienungsanleitung

Harman

Harman JBL G Series Bedienungsanleitung

Harman

Harman JBL Performance Series Bedienungsanleitung

Harman

Harman harman/kardon CITATION SURROUND Bedienungsanleitung

Harman

Harman Infinity REF-075tx Bedienungsanleitung

Harman

Harman JBL EON 718S Bedienungsanleitung

Harman

Harman JBL Professional CSS8018 Bedienungsanleitung

Harman

Harman JBL QUANTUM ONE Bedienungsanleitung

Harman

Harman JBL PLAYLIST Bedienungsanleitung

Harman

Harman JBL GO Bedienungsanleitung

Harman

Harman JBL Professional PRX600 Series Bedienungsanleitung

Harman

Harman JBL EON10-G2 Betriebsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung