Harman Martin P3 PowerPort 1000 IP Bedienungsanleitung

P3 PowerPort 1000 IP™

Rental model

User Manual

Dimensions

All measurements are expressed in millimeters

520

460

426

145

disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the

use of, inability to use or reliance on the information contained in this document. Martin™, Harman™ and all other trademarks in this

document pertaining to services or products by Martin Professi

Contents

Safety Information .............................................................................................................. 4

Introduction ......................................................................................................................... 6

Overview ............................................................................................................................. 6

Physical installation ............................................................................................................ 7

Power and data connection ................................................................................................ 9

AC mains power input .......................................................................................................... 9

P3 video data input/throughput ............................................................................................. 12

Hybrid power + data output .................................................................................................. 12

Using the product ............................................................................................................. 13

Applying power ................................................................................................................. 13

Status LEDs and control button ............................................................................................ 13

Handling DMX and RDM ..................................................................................................... 14

Service and maintenance ................................................................................................. 15

Cleaning .......................................................................................................................... 15

Installing new software ....................................................................................................... 15

Condensation and pressure relief valve .................................................................................. 15

Troubleshooting.................................................................................................................16

Specifications .................................................................................................................... 17

4 P3 PowerPort 1000 IP™ Rental Model User Manual

Safety Information

The following symbols are used to identify important safety information on the product and in this document:

Warning! Read this user manual before installing and operating the P3 PowerPort 1000 IP.

Warning! The P3 PowerPort 1000 IP is designed to integrate with other devices in a video display

installation. Follow the safety precautions given not only in this user manual but also in the manuals

of all the devices you connect to it. Observe all warnings given in the manuals and printed on

devices. Install and operate devices only as described in the manuals and only in accordance with

local laws and regulations. Keep this manual for future reference. Manuals are supplied with devices

and also available for download from www.martin.com.

Warning! The Martin™ P3 PowerPort 1000 IP is not for household use. It presents risks of severe

injury or death due to fire and burn hazards, electric shock and falls. It must be installed by qualified

technicians only.

Warning! There are no user-serviceable parts inside the P3 PowerPort 1000 IP. Refer any operation

not described in this manual to Martin™ or its authorized service agents.

If you have any questions about how to operate the P3 PowerPort 1000 IP safely, please contact your

Martin™ supplier or call the Martin™ 24-hour service hotline on +45 8740 0000, or in the USA on

1-888-tech-180.

PROTECTION FROM ELECTRIC SHOCK

• The P3 PowerPort 1000 IP can supply a safe maximum current of 5 A on each of its four power + data

outputs. Do not connect devices that draw a combined total current of more than 5 A to a power + data

output.

• Check and respect the directions given in the user manuals of all the devices that you intend to connect to

the P3 PowerPort 1000 IP, particularly the instructions, warnings and limits that apply to:

- system layout,

- connections to other devices,

- specified cables,

- maximum cable lengths, and

- maximum number of devices that can be connected.

• Provide a means of locking out AC mains power that allows power to the installation to be shut down and

made impossible to reapply, even accidentally, during work on the installation.

• Shut down power to the installation during service and when it is not in use.

• Ensure that the P3 PowerPort 1000 IP is electrically connected to ground (earth).

WARNING!

Read the safety precautions in this section before

installing, powering, operating or servicing this

product.

Warning!

Safety hazard.

Risk of severe

injury or

death.

Warning!

Hazardous

voltage. Risk

of severe or

lethal electric

shock.

Warning!

Fire hazard.

Warning!

Refer to

manual before

installing,

powering or

servicing.

Safety Information 5

• Connect the P3 PowerPort 1000 IP to AC mains power at 120-240 V~ (nominal), 50/60 Hz only.

• Use only a source of AC mains power that complies with local building and electrical codes and has both

overload and ground-fault (earth-fault) protection.

• Use only a power input cable that has 14 AWG or 2.5 mm² minimum conductor size and an outer cable

diameter of 8 - 13 mm (0.35 - 0.5 in.). Power cable must be hard usage type (SJT or equivalent) and

heat-resistant to 90° C (194° F) minimum. In the EU the cable must be HAR type.

• Use only the cables specified by Martin™ for the devices concerned to interconnect them. If the specified

cables are not long enough for an intended cable run, consult Martin™ for assistance in finding or

creating a safe alternative cable.

• Before applying power to the installation, check that all power distribution equipment and cables are in

perfect condition and rated for the current requirements of all connected devices.

• Isolate the installation from power immediately if the product, power cable or power plug are in any way

damaged or defective, or if they show signs of overheating.

PROTECTION FROM BURNS AND FIRE

• Do not attempt to bypass fuses.

• Provide free airflow around the device.

• Do not operate the P3 PowerPort 1000 IP if the ambient temperature (Ta) exceeds 55° C (131° F).

• Do not modify the P3 PowerPort 1000 IP in any way not described in this manual or install other than

genuine Martin™ parts. Use only accessories approved by Martin™.

PROTECTION FROM INJURY

• When installing the P3 PowerPort 1000 IP above ground level, ensure that the primary installation

hardware and supporting structure can hold at least 10 times the weight of all the devices they support.

• When suspending the P3 PowerPort 1000 IP from a rigging structure, use two rigging clamps that are

approved by an official notified body for the weight they support and installed as described in this manual.

• In an overhead installation or where the P3 PowerPort 1000 IP may cause injury if it falls:

- block access below the work area and work from a stable platform whenever installing, servicing or

moving the P3 PowerPort 1000 IP,

- install as described in this manual a secondary attachment (such as a safety wire) that is approved in

accordance with UL1573 Section 9.2 and EN 60598-2-17 Section 17.6.6 as a safety attachment for the

weight it must secure if the primary attachment fails, and

- as soon as work is completed, check that all hardware and components are securely in place and that

all installation and rigging hardware used is securely fastened.

6 P3 PowerPort 1000 IP™ Rental Model User Manual

Introduction

Thank you for selecting the Martin™ P3 PowerPort 1000 IP, an integrated power and data processor for

Martin’s range of creative LED video products, including the VDO Sceptron™ line. When driven by one of

Martin’s award-winning P3™ System Controllers, it powers connected products with high-quality image

processing capabilities and extremely easy setup and configuration. This manual covers the rental model of

the P3 PowerPort 1000 IP. Designed for easy rigging, quick connection, and outdoor use, the rental model

is perfect for all temporary applications. For permanent installations, we recommend the installation model.

For possible system layouts when using the P3 PowerPort 1000 IP™ with Martin™ video products, please

see the user documentation for those products. Martin™ user documentation is supplied with products and

available for download from the Martin™ website at http://www.martin.com, where you can also find the

latest specifications, firmware updates and support information for all Martin™ products.

Martin™ welcomes input from users. Comments or suggestions regarding this manual can be e-mailed to

service@martin.dk or posted to: Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18,

DK-8200 Aarhus N, Denmark.

Overview

The parts identified below are referred to throughout this manual.

Physical installation 7

Physical installation

Warning! If suspending the product above ground level, secure it against failure of primary

attachments with a safety cable that is approved for the weight of the product.

Warning! If suspending the product from a truss, use 2 clamps to rig the product. Do not use only

one rigging clamp.

Clamping the product on a truss

The P3 PowerPort 1000 IP can be clamped to a truss or similar rigging structure with two clamps bolted

through the clamp attachment points in the mounting bar. See Figure 1. It is intended to be installed hanging

down vertically, as shown in Figure 2. This orientation provides maximum protection from moisture.

When rigging the device hanging vertically from a truss, you can use open-type clamps such as G-clamps.

When installing in any other orientation, you must use closed-type rigging clamps such as half-coupler

clamps (see Figure 3) that completely encircle the truss chord.

8 P3 PowerPort 1000 IP™ Rental Model User Manual

To hang the device on a truss:

1. Check that the rigging structure can support at least 10 times the weight

of all devices and equipment to be installed on it.

2. Securely fasten two (2) rigging clamps through the clamp attachment

points in the mounting bar. The bolts used must be M12, grade 8.8 steel

minimum, and fastened with self-locking nuts.

3. Block access under the work area.

4. Working from a stable platform, hang the device on the truss and fasten

the rigging clamps onto the truss.

5. Secure the device with a safety cable (or other secondary attachment)

that is approved for the weight of the device so that the safety cable will

hold it if a primary attachment fails. As shown in Figure 2, loop the safety

cable around the mounting bar and the truss or other secure anchoring

point.

Figure 3: Martin™

half-coupler rigging

clamp

Power and data connection 9

Power and data connection

Warning! For protection from electric shock, the P3 PowerPort 1000 IP must be electrically

connected to ground (earth). The AC mains supply must be fitted with a fuse or overload circuit

breaker and ground-fault (earth-fault) protection. Unused sockets must be capped.

Warning! The power input cable must meet the specifications listed under ”Protection from electric

shock” on page 4.

Warning! Double-pole/neutral fusing. If the installation is not completely disconnected from power,

parts may remain live even if one of the two mains fuses has blown.

Warning! The current draw at each of the P3 PowerPort 1000 IP’s four DC power/video data outputs

must not exceed 5 A per output. Before connecting devices to the outputs, check carefully the

information about system layouts and maximum safe limits in all the user manuals of the devices in

the system.

AC mains power input

The P3 PowerPort 1000 IP must be connected directly to AC mains power. It features an auto-sensing

switch-mode power supply that automatically adapts to power at 120-240 V~ (nominal), 50/60 Hz. Note that

the device utilizes double-pole/neutral fusing. Lethal current may be present even if one of the two mains

fuses has blown.

The P3 PowerPort 1000 IP is connected to power via the Neutrik PowerCon TRUE1 AC mains input socket.

A suitable power cable with a PowerCon TRUE1 cable connector can be ordered from Martin™.

Alternatively, you can order the PowerCon TRUE1 cable connector as a separate item from Martin™ and

install it on your own power cable as described on the following pages. If you use your own power cable, it

must meet the cable specifications listed under ”Protection from electric shock” on page 4. See

”Accessories” on page 18 for Martin™ cable and connector ordering details.

10 P3 PowerPort 1000 IP™ Rental Model User Manual

Inhaltsverzeichnis

Andere Harman Sprecher Handbücher

Harman

Harman JBL Charge4 Bedienungsanleitung

Harman

Harman JBL Club 6.5" Bedienungsanleitung

Harman

Harman harman/kardon HK OMNI 20 Bedienungsanleitung

Harman

Harman JBL PROFESSIONAL VTX A8 Bedienungsanleitung

Harman

Harman JBL C Series Bedienungsanleitung

Harman

Harman JBL VerTec VT4889ADP Technisches Datenblatt

Harman

Harman JBL Performance Series Bedienungsanleitung

Harman

Harman revel concerta 2 Bedienungsanleitung

Harman

Harman JBL AUTHENTICS 200 Bedienungsanleitung

Harman

Harman JBL PULSE5 Bedienungsanleitung

Harman

Harman JBL PULSE Bedienungsanleitung

Harman

Harman Harman/Kardon CITATION OASIS DAB Bedienungsanleitung

Harman

Harman REVEL C263 Bedienungsanleitung

Harman

Harman JBL 4367 Bedienungsanleitung

Harman

Harman harman/kardon Go+Play Bedienungsanleitung

Harman

Harman JBL CINEMA SB160 Bedienungsanleitung

Harman

Harman Infinity REF-075tx Bedienungsanleitung

Harman

Harman JBL CLUB ONE Bedienungsanleitung

Harman

Harman JBL CONCERT 9631F Bedienungsanleitung

Harman

Harman JBL STADIUM 6 Bedienungsanleitung

Harman

Harman kardon Citation 200 Bedienungsanleitung

Harman

Harman Harman/kardon OMNI 50+ Bedienungsanleitung

Harman

Harman JBL BOOMBOX3 Bedienungsanleitung

Harman

Harman JBL CLICK Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung