Harvia KAMMI 180 Bedienungsanleitung

Version 08/22 item no. 1-053-327

ASSEMBLY INSTRUCTIONS

English

Barrel sauna

KAMMI 180

Ø 220 ×180 cm

Table of Contents

1. Preparing for installation 3

1.1. Important note 3

1.2. Foundation 4

1.3. Anchoring the outdoor sauna 4

1.4. Tools required 4

1.5. Maintenance and cleaning 6

1.6. Disposal 6

2. Assembling the cabin 7

2.1. Mounting the feet 7

2.2. Assembling the barrel staves 7

2.3. Assembling the front and rear wall 7

2.4. Completing the barrel 7

2.5. Mounting the door 8

2.6. Installinginteriorttings 8

2.7. Installing accessories 8

2.8. Covering the roof 8

Dimensional drawing (following the last language of the instructions) 11

Parts list (following the last language of the instructions) 12

Assembly illustrations (following the last language of the instructions) 16

Assembly instructions p. 3/8

1. Preparing for installation

Read these assembly instructions carefully and keep them within reach. so that

you can look up product information at any time.

1.1. Important note

●Checkwithyourlocalplanningauthority(municipalo󰀩ce,magistrate)with

respect to the building regulations and load standards.

●A solid foundation is important for the durability as well as the safety of your

outdoor sauna. We recommend having the foundation laid by a specialist.

●The anchoring of the outdoor sauna is the responsibility of the customer. No

warranty in the event of damage.

●The outdoor sauna is delivered by lorry (also possible by semi-trailer truck).

Access to the unloading area must be ensured.

●Beforeyoubeginwork,checkthepartslisttoensurethatalltheindividual

partshavebeendelivered.Ifyoudiscoveranymissingparts,notifyyour

dealer within 14 days of receiving the sauna cabin.

● Keepthedeliverynote,theinvoiceandtheassemblyinstructionsinasafe

place in case of any questions.

●You need an assistant for the installation.

● Allscrewttingsmustbepre-drilled.

Attention!

Theelectricalconnectionmayonlybeperformedbyaqualied

electricianorsimilarlyqualiedperson.

●We recommend installing the bitumen shingles included in the scope of

delivery promptly after completion of the barrel sauna.

● Woodisanaturalproductthatcanswell,shrinkorwarp,despitegoodstor-

age.Forthisreason,someforcemaybenecessaryduringtheinstallation.

●Thewoodoftheoutdoorsaunaisuntreated.Toincreasethelifeexpectancy,

we recommend painting the outside with a suitable paint to protect the wood.

●The inside of the wooden parts used must not be treated with any paint.

These assembly instructions can also be found in the downloads section

of our website: www.harvia.com.

Assembly instructions p. 4/8

1.2. Foundation

The following foundation elements have proven themselves in practice:

• Foundation slab (base plate)

• Strip foundation

Forbothtypes,afoundationthatisabsolutelyatandload-bearingmustbe

ensured. Only then can the assembly of the outdoor sauna be ensured without

anydi󰀩cultiesandwithapreciset.

1.3. Anchoring the outdoor sauna

Theoutdoorsaunamustbermlyanchoredonthebaseplateorthestrip

foundation. Strong winds can exert a powerful force on the garden sauna. To

preventdamagetoyour,orthirdparty,propertyproperanchoringisessential.

We point out that anchoring the garden sauna is the responsibility of the

customer and we do not accept any liability for accidental damage.

1.4. Tools required

●Hammer with a wooden block and a mallet

●Cordless screwdriver with bits for cross-head screws and Torx

●Roller tape measure

● Drillbitswithadiameterof4mm,5mm,6mm,20–30mm

(for sauna heater power cable)

●Spirit level

●Open-ended spanner

●Utility knife

●Ladder

●Saw

Assembly instructions p. 5/8

60 cm

80 cm

100 cm

This symbol indicates tips and useful information

Pre-drill

Cut to correct size

Nailing

Carry out wiring

Check the right angle:

Handle glass with care: Special care must be taken with the edges of

the glass—hardened glass can shatter into small pieces in the event of

impact. Insert protective cushioning (e.g: cardboard box) under the edge

of the glass.

Assembly instructions p. 6/8

Pitchpocketsarenotgroundsforreturn,sincetheycanalwaysappearin

spruce wood and the depth at which they lie cannot be detected during

the sorting-out process.

Ifthesearejustunderthesurface,heatcancausethemtosoftenand

“bleed”.

The leaking pitch can be removed with a rag soaked in acetone. If only

dropletsofpitchoccur,allowthesetohardenandthencarefullyscrape

themo󰀨withaknife.

1.5. Maintenance and cleaning

●The sauna should be cleaned inside with a damp cloth. Only use warm

water—no cleaning products.

●We recommend heating the cabin once a month if the sauna is not used for

a long time.

1.6. Disposal

●Dispose of packaging materials in accordance with the applicable

waste disposal regulations.

Assembly instructions p. 7/8

2. Assembling the cabin

2.1. Mounting the feet

Place the impregnated feet on the foundation as shown in the illustration (see

Page 14). Fix them temporarily with two staves.

2.2. Assembling the barrel staves

Start by placing the lower stave in position (with drain—see page 15).

Lay four staves to the left and four to the right and screw the feet to the staves.

Make sure that there is no visible gap between the staves.

2.3. Assembling the front and rear wall

Connect the individual parts of the front and rear wall as shown (see page 16).

Place the walls in the groove of the staves. Check the vertical alignment with the

spiritlevelandprovisionallyxinplacewithtwostaves.

Forthelighting,rsttthemetalclipsonthewoodenstrip.Fixthewoodenstrip

inthecentreofthebackwall,approx.5cmabovetheoorgrid.ClamptheLED

strip and drill the cable bushing at the desired location (the power supply unit

may be placed outside the sauna).

2.4. Completing the barrel

Fittheremainingstaves.Fixthemtothefrontandbackwallsusingscrews,or

use a strap if you would like to avoid screw holes (these will be visible on the

outsidewhennished).

Closingthebarrel:Usewhateverisrequiredfromthesuppliedllerset(=stave

in strips).

ATTENTION!

NotetheoorplanonPage12andillustrationsfromPage11onwards.

Always put the staves together with the round part facing upwards.

Makesurethatthefeetarettedparalleltoeachanother.

Note the power supply!

Assembly instructions p. 8/8

Fit the tensioning straps.

Beforetensioningthemetalbands,removethescrewsfromthestaves.Tighten

the metal bands so that there is no visible gap between the staves. This must

be checked regularly and retightened if necessary.

2.5. Mounting the door

Place the door frame in the opening from the outside. Note that the door opens

outwards—the door can be attached on the left or on the right.

Fix the door from the inside with the cover slats.

The door handles are screwed from the inside.

Fit the weatherboard (drip edge).

2.6. Installing interior ttings

Placetheoorgridsothatitislevel.

Fitthebenchsupportslatsataheightofapprox.45cmtotheoorgrid.

Install the benches.

Fixthebackrestsapprox.20cmabovethebench.

2.7. Installing accessories

Fit the ventilation panel on the inside.

Assemble the protection grille.

Fit the insect screen on the outside.

2.8. Covering the roof

Installthetriangularstrips(dripedge)ataheightofapprox.110cm.

Start attaching the bitumen shingles on the triangular strip with the top of shingle

sheets facing down. Now lay the other shingle sheets overlapping and evenly

o󰀨set.Youcanmakethetopridgerowfromsections.Thesearelaidoverlapping

in a scale-like manner. Pay attention to the prevailing wind direction.

Note that the tension rods are placed in the lower half of the barrel sauna.

MONTAGEANLEITUNG

Deutsch

Version 08/22 Artikel-Nr. 1-053-327

Fasssauna

KAMMI 180

Ø 220 x 180 cm

Inhaltsverzeichnis

1. Montage Vorbereitung 3

1.1. Wichtige Hinweise 3

1.2. Fundament 4

1.3. Verankerung der Außensauna 4

1.4. Benötigtes Werkzeug 4

1.5. Wartung und Reinigung 6

1.6. Entsorgung 6

2. Montage Kabine 7

2.1. Montage Standfüße 7

2.2. Montage Fassdauben 7

2.3. Montage Vorder- und Rückwand 7

2.4. Fertigstellung Fass 7

2.5. Montage Tür 8

2.6. Montage Inneneinrichtung 8

2.7. Montage Zubehör 8

2.8. Montage Dacheindeckung 8

Abbildung Abmessungen (nach der letzten Sprache) 11

Stückliste (nach der letzten Sprache) 12

Montage Abbildungen (nach der letzten Sprache) 16

Inhaltsverzeichnis

Sprachen:

Andere Harvia Sanitärprodukte Handbücher

Harvia

Harvia HAR-5002-01 Bedienungsanleitung

Harvia

Harvia sentiotec BASIC MEDIUM Bedienungsanleitung

Harvia

Harvia K10G-U1 Bedienungsanleitung

Harvia

Harvia sentiotec BALANCE VIEW SMALL Bedienungsanleitung

Harvia

Harvia sentiotec MiniMy Bedienungsanleitung

Harvia

Harvia sentiotec Komfort Large Leitfaden

Harvia

Harvia Spectrum Mini Bedienungsanleitung

Harvia

Harvia S1010 Bedienungsanleitung

Harvia

Harvia SMARTFOLD SF1212 Bedienungsanleitung

Harvia

Harvia Sentiotec KASKI 240 VIEW Canopy Bedienungsanleitung

Harvia

Harvia Radiant SGC0909BR Bedienerhandbuch

Harvia

Harvia SmartFold SHSF1212BL Bedienungsanleitung

Harvia

Harvia LAHTI Bedienungsanleitung

Harvia

Harvia sentiotec ALASKA VIEW Bedienungsanleitung

Harvia

Harvia SIRIUS SC1111 Bedienungsanleitung

Harvia

Harvia sentiotec WELLFUN LARGE Leitfaden

Harvia

Harvia Griffin Infra CG170I Gebrauchs- und Wartungshandbuch

Harvia

Harvia FENIX SHF1620S Leitfaden

Harvia

Harvia SOLIDE COMPACT Leitfaden

Harvia

Harvia Sentiotec PHONIX-L Bedienungsanleitung

Harvia

Harvia Sentiotec Emotion Bedienungsanleitung

Harvia

Harvia BERGEN Bedienungsanleitung

Harvia

Harvia Spectrum Small SGS1310 Bedienungsanleitung

Harvia

Harvia sentiotec Komfort Small Leitfaden

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema