INTRODUCTION
IP200 User’s Manual 1
Introduction
Specifications
Product Name IP200
Form Factor ETX base board (for ETX CPU modules)
Dimensions 7.5” x 9”
USB External connector x 1 (3 ports)
Pin-header x 1 (1 port)
TV - Out One pin-header for composite and S-video
VGA DB15 connector x 1 (for CRT)
Serial Ports External DB9 connectors x 4 (4 ports): for COM 1~4,
support RS232/422/485, and optical isolation support
(use Optocoupler: 6N137
Pin-header x 2 (2 ports): for COM5/6, support RS232.
Parallel Port External DB25 connector x 1 (supports SPP/EPP/ECP)
Keyboard/Mouse External PS/2 connector x 2 (for KB and MS)
Pin-header x 1 (for KB/MS)
Ethernet External RJ45 connector x 2, Pin header x 2
Compact Flash One compact flash connector with ejector
IDE Interface One 40-pin box-header (2.54mm for secondary IDE
One 44-pin PCB socket (2mm/RT angle) for primary IDE
Expansion Slots One PCI slot (for two PCI cards on riser card)
One PC/104 connector
One Micro PCI socket
IrDA Pin header
LCD Panel
Connector LVDS interface (Hirose DF13) connectors x 1
Audio Connector 1 x pin-header for Line-in, Line-out, Mic
1 x pin-header for CD IN (from Line-in)
Chipsets NetMos NM9845CV (PCI interface) x 1 and IMP16C552 x
1: support 4 COM ports
Intel 82541GI LAN controller x 1: Gigabit LAN controller
PWM LTC1628 x 1 : for power convert, output DC 5V &
3.3V, output current depend on input
Power Supply
Connector 1 x power connector for DC 12V input
Other
Connectors 1 x pin-Header for feature header (including: speaker,
power button, H/D reset button, HDD activity LED, status
LED, I2C bus, buzzer)
2 x fan connectors
1 x pin-header for panel backlight control
1 x 4-pin CD-ROM power outlet header
1 x 4-pin FDD power outlet header
Operation Temp. 0°C~60°C (32°F~140°F)
Storage Temp. -20°C~80°C (-68°F~176°F)
Relative Humidity 10%~90% (non-condensing)
