Unpacking & Checking Of Contents
Unpack your BVP50 carefully and inspect if all parts are intact. If any of the parts are
missing damaged, please contact Hawk Customer Service at (574) 294-1910 or customer-
service@hawkenterprises.com.
Operang Instrucons
This BVP50 requires NO ASSEMBLY. The BVP50 is packaged and ready to be put to work.
The BVP50H is intended to be used for drying carpet spills, drying surfaces such as
bathroom floors, venlang as well as circulang air.
1. Place the unit on the surface that needs to be dried.
2. Plug the unit into a grounded outlet .
3. Select the desired speed and posion
Floors and Carpet Maintenance
WARNING: As with all electrical equipment, the unit must be
disconnected from power before servicing or cleaning.
ŸBefore each use, inspect the unit for damage, blocked inlets and exhaust and for
foreign material buildup.
ŸWhen the BVP50 is turned on, inspect the unit for excessive vibraon. In the event of
excessive vibraon or if the fan wheel rubs against the rotomolded housing,
immediately turn off the unit and have a cerfied technician inspect the unit.
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
(574) 294-1910 - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
(574) 294-1910 - www.hawkenterprises.com
ATTENTION!
Read all safety rules carefully before aempng to operate the
BVP50H. Please retain this manual for future reference.
NEVER operate this unit when flammable materials or vapors
are present -- electrical devices produce arcs or sparks which
may cause a fire or an explosion.
NEVER operate this unit unaended.
WARNING!
To reduce the risk of fire, electric shock or injury, follow the
direcons below:
ŸDo not use an extension cord with this air
mover.
ŸDo not use with solid state speed control
device.
ŸDo not allow to be used as a toy. Close
aenon is necessary when used by or near
children.
ŸDo not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
ŸDo not use with damaged cord, plug or
other parts.
ŸCall customer service if your air mover is not
working as it should, has missing parts, has
been dropped, damaged, le outdoors or
dropped into water.
ŸDo not pull or carry by cord, use cord as
handle, close a door on cord, or pull cord
around sharp edges or corners. Keep cord
away from heated surfaces.
ŸDo not run cord under carpeng. Do not
cover cord with throw rugs, runners or
ŸUse product only as described in this
manual.
ŸTo reduce the risk of electric shock, do not
expose to rain, immerse in or use in standing
water. Store indoors only.
ŸUse only with GFCI-protected outlets.
ŸWhen storing or transporng, do not stack
air movers more than 5 units high.
ŸElectrical appliances can ignite flammable
vapors or dust. Do not use near combusble
liquids, gases or dusts.
ŸDo not leave plugged into outlet when not in
use or when servicing. Turn off before
unplugging.
ŸTo reduce the risk of srring up and inhaling
toxic vapors, do not use near toxic or
hazardous materials.
ŸNever operate with safety grills removed.
ŸThis unit has an automacally-operated
protecve device which may shut down the
unit during operaon. Unplug before
servicing or cleaning.
WARNING!
ŸTo reduce the risk of electric shock, connect only to a GFCI
protected outlet. Do not expose to water
CAUTION
ŸThis air mover has an automac motor shutoff device. It
may restart without noce.
ŸTo reduce the risk of injury, unplug before servicing.
WARNING!
ŸDo not use an extension cord with this fan. To reduce the
risk of p-over during storage or transport, stack up to 5
units high only.
32
BVP50
0 degrees
BVP50
45 degrees
BVP50
90 degrees
BVP50H
0 degrees
BVP50H
90 degrees
Hawk BVP50, BVP50H
User’s Manual
Hawk BVP50, BVP50H
User’s Manual
HAWK HAWK
ENTERPRISES ENTERPRISES
