Hawking Net-Vision HNC290G Bedienungsanleitung
1
2
Trademarks & Copyright
Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are
trademarks of their respective companies.
No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation,
transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act
of 1976.
FCC Certifications
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
xReorient or relocate the receiving antenna.
xIncrease the separation between the equipment and receiver.
xConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
xConsult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired
operation.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be
required to take adequate measures.
All trademarks and brand names are the property of their respective proprietors.
Specifications are subject to change without prior notification.
HAWKING LIMITED WARRANTY
Hawking Technology guarantees that every Net-VisionTM HNC290G Wireless-G Network Camera is free from
physical defects in material and workmanship under normal use for (1) year from the date of purchase. If the
product proves defective during this one-year warranty period, call Hawking Customer Service in order to obtain
a Return Authorization number. Warranty is for repair or replacement only. Hawking Technology does not issue
any refunds. BE SURE TO HAVE YOUR PROOF OF PURCHASE. RETURN REQUESTS CANNOT BE
PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization
number clearly on the outside of the package and include your original proof of purchase.
IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION. Hawking Technology makes
no warranty or representation, expressed, implied or statutory, with respect to its products or the contents or use of this
documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness
for any particular purpose. Hawking Technology reserves the right to revise or update its products, software, or
documentation without obligation to notify any individual or entity. Please direct all inquiries to:
techsupport@hawkingtech.com.
3
1.Introduction 5
2.PackageContents 6
3. System Requirements 7
4. Hardware Installation
4.1 LEDsandFocusing 8
4.2 Camera Ports 9
4.3 InstallationProcedures 10
5.SoftwareInstallation 11
6. Using the Administrator’s Utility 18
6.1 GeneralSettings 19
6.2 DetailedSettings 21
6.2.1 Network Settings 22
6.2.2 Wireless Settings 24
6.2.3 EmailSettings 28
6.2.4 MotionDetection 29
6.2.5 LoginFree 30
6.2.6 NTPSettings 31
6.2.7 Resolution 32
6.2.8 Advanced Settings 33
6.2.9 Users 34
6.2.10 Tools 35
6.2.11 About 36
6.3 Setting Wizard 37
7. Using the Camera Viewer
7.1 Panel Introduction 39
7.2 CameraButtons 40
7.3 CameraStatus 40
7.4 ControlButtons 41
7.5 VideoRecording 42
7.6 ChangeResolution 43
7.7 View Four Cameras Simultaneously 44
7.8 Viewer Utility Settings 45
7.8.1 Settings 45
7.8.2 Recording 46
7.8.3 Status 48
7.8.4 General 49
7.8.5 About 50
7.9 Playback 50
7.10 RotateVideo 52
4
8. Web Connection and Setup 53
8.1 CameraSettings 54
8.2 NetworkSettings 55
8.3 Wireless Settings 62
8.4 Password Settings 65
9. Frequently Asked Questions 66
10. Technical Specifications 67
11. Appendix A: How to View Your Camera via the Internet 68
12. Appendix B: Viewing via UPnP in Windows XP 74
5
Thank you for purchasing the HNC290G. The Net-VisionTM Wireless-G Network Camera is a high performance stand-
alone camera that enables remote monitoring, surveillance, and viewing of live video from both within your local area
network (LAN) and from outside the network via the Internet. Unlike “web cameras”, which require an attached PC for
operation, the HNC290G connects directly to the network and has its own IP address, thereby allowing users to access the
video from anywhere on the network, as well as from anywhere in the world via web-based remote access.
The HNC290G supports both the 802.11b/g wireless standard and the 10/100Mbps Fast Ethernet standard. As a result,
the camera can stream high-quality live video at up to 30 frames per second. Installation of the camera is hassle-free with
the Quick Setup Wizard utility. Also included with the camera are security and other convenient features, as well as a
management and control software application for playback, recording, and more. The versatile and compact HNC290G
offers a broad array of applications and can be used to monitor your home, office, and other critical locations.
Please take some time to review this User’s Manual, as it will help you understand the network camera’s various
features, functions, and utilities, as well as installation and operation procedures.
6
Unpack and Inspect
Open the package and carefully remove all items. The complete HNC290Gpackage consists of:
xOne Net-VisionTM HNC290G Wireless 802.11b/g Network Camera
xOne CD with Easy-Installation Quick Setup Wizard and Utilities
xOne Quick Installation Guide
xOne DC Power Adapter
xOne External Wireless Antenna
xOne Camera Stand/Mounting Kit
xOne Hosted Video Management (powered by D3Data) installation sheet
Please check to make sure that the unit was not damaged during shipping and that no items are missing. If you encounter a
problem, please contact your dealer.
7
The system requirements for PC or Notebook PC users to access the HNC290G are:
xOS System: Windows 98SE, ME, NT, 2000, XP, Server 2003
xCPU: Intel Pentium III 750MHz or above, or Intel Celeron 1GHz or above
xMemory Size: 128MB (256MB recommended)
xVGA Card Resolution: 800 x 600 or above
8
4.1 LEDs and Focusing
The camera head and its focus ring allow you to modify the aim and focus of the camera. To adjust the camera’s focus,
rotate the dark focus ring in either direction until the desired viewing area or object becomes sharp/clear.
There are four LEDs that indicate camera and network status:
yPower
The LED will be lit orange when the device is powered on and ready for access.
yLink
When the camera is monitoring, the LED will be lit green.
yWLAN
When the network camera is linked to a wireless LAN access point or a wireless station, the LED will be lit green.
The LED will flash when video is transmitted or received via the wireless network.
yLAN
When the network camera is linked to a wired network, the LED will be lit green. The LED will flash when video is
transmitted or received via the wired network.
LED: Power
LED:
WLAN
LED: Link
LED:
LAN
Lens & Manual
Focus Ring
9
4.2 Camera Ports
The back panel of the network camera includes three ports and a Reset button.
yAntenna Connector
This is a standard Reverse-SMA connector. Any antenna with a Reverse-SMA connector can be connected to the
network camera.
yPower
The “Power” port is where you will connect the network camera’s power adapter.
yLAN
The LAN port is where you will connect the Ethernet network cable.
yReset
1. If a problem occurs with the network camera, but you do not want to reset it to its original default settings, press
the reset button for less than two seconds (using a pen or pencil tip, or something similar) and the network
camera will re-boot itself and keep your original configurations.
2. If a problem persists, you experience more severe problems, or you forgot your password, press the reset button
for longer than five seconds and the network camera will reset itself to the original factory default settings
(warning: your configurations will be replaced by the factory default settings).
Antenna LAN
Port
Power
In
p
ut
Reset
Button
10
4.3 Installation Procedure
1. Unpack all of the contents from the network camera’s package and verify that all the items listed in the “Package
Contents” chapter have been included.
2. Locate the antenna connector on the left side of the camera’s rear panel. Screw the
base of the antenna (included with the HNC290G) into the antenna connector.
3. Locate the network cable connector (RJ-45 port) on the camera’s rear panel. Connect
an Ethernet cable to the port. Connect the other end of the cable to the network.
Please Note: For initial setup and configuration, you will need to use a wired
connection. After completing the setup and configuration, you can begin using your
network camera wirelessly.
4. Locate the power input connector on the camera’s rear panel, and attach the external
power supply. Then, plug the adapter into an available outlet. Please check to see
that the orange “Power” LED located next to the lens of the camera (front side) is lit
to ensure that the camera is powered on. (To ensure a network connection, please
check to see that the green “Link” LED is lit or flashing.)
Please Note: It is strongly recommended that you use the power adapter that was shipped with the network camera. Do
NOT use power adapters from any other source.
2
3
4
Andere Handbücher für Net-Vision HNC290G
2
Inhaltsverzeichnis
Andere Hawking IP-Kamera Handbücher
