Haws 3602FR Leitfaden

09/10/2021 Model 3602FR Page 1 of 12

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: [email protected]  website: www.hawsco.com

No. 0580001169 (2)

MODEL 3602FR

Outdoor Drinking Fountain

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

LIMITED WARRANTY

HAWS warrants that all of its products are guaranteed against defective material or poor workmanship for

a period of one year from the date of shipment. The foregoing notwithstanding, HAWS warrants certain

specific products or components thereof for an adjusted period. A list of these excepted products and

components and a description of their respective warranty terms may be found here:

www.hawsco.com/warranty. HAWS’liability under this warranty shall be discharged by furnishing without

charge F.O.B. HAWS factory any goods, or part thereof, which shall appear to the Company upon

inspection to be of defective material or not of first-class workmanship, provided that a claim is made in

writing to Company within a reasonable period after receipt of the product. Where claims for defects are

made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. HAWS shall

not be liable for the cost of repairs, alterations or replacements, or the labor required to implement them, or

for any expense connected therewith made by the owner or owner’s agents, except upon written authority

from HAWS. HAWS shall not be liable for any damages caused by defective materials or poor

workmanship, except for replacements, as provided above. Buyer agrees that HAWS has made no other

warranties either express or implied in addition to those above stated, except that of title with respect to

any of the products or equipment sold hereunder and that HAWS shall not be liable for general, special,

incidental, or consequential damages claimed to arise under the contract of sale.

Equipment manufactured by HAWS is warranted to function if installation and maintenance instructions

provided are adhered to. The units also must be used for the purpose for which they were intended. Any

HAWS emergency equipment is intended to supplement first-aid treatment. Due to widely varying

conditions, HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury

or the aggravation of existing or prior injuries.

EXCEPT AS EXPRESSLY STATED HEREIN, HAWS HEREBY DISCLAIMS ALL WARRANTIES,

WHETHER EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT

LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED WITHOUT THE

WRITTEN CONSENT OF HAWS. REMEDIES AND REPLACEMENTS STATED HEREIN ARE

EXCLUSIVE. IN NO EVENT SHALL HAWS BE LIABLE FOR ANY SPECIAL, PUNITIVE,

CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON INCLUDING BUT NOT LIMITED

TO DAMAGES FOR LOSS OF USE OR PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY

DAMAGE, OR OTHER MONETARY LOSS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

09/21 Model 3602FR Page 2 of 12

RECOMMENDED TOOLS:

- Measuring Tape

- PVC Pipe Cutter

- Plastic Tubing Cutter

- PVC Solvent Weld Glue

- ¼” Bit-Holding Screwdriver

- Level

- 10”Pipe Wrench

- Adjustable Plier

- 1/8 and 5/32 Tamper Resistant Hex Bits (Supplied)

- 9/16”and 5/8”Box/Open Combination Wrenches, 8”Max Length

- 3/8”Socket Wrench/Rachet, 8”Max Length

- 9/16”Deep Socket

- 15/16”Socket

LOCATION OF UNIT: The Model 3602FR Drinking Fountain can be installed and assembled

to be ADA accessible by first locating the pedestal base with at least 8 inches of clear

unobstructed hardscape behind the pedestal. Provide hardscape that is at least 74 inches

wide. When the right pedestal arm is installed in the high orientation, the height dimensions

shown on the model specification sheet meet current Federal Americans with Disabilities Act

(ADA) wheelchair requirements. When a fountain is installed on top of the pedestal, the height

dimensions shown on the model specification sheet meet current ADA standing height

requirements. When installing this unit, local, state and federal (including ADA) codes must

be adhered to. If height other than shown is required, then dimensions must be adjusted

accordingly.

SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6 ATM)

flowing pressure. Where sediment or mineral content is a problem, an inlet filter is

recommended.

PLUMBING CONNECTIONS: Water supply inlet connection is a 3/8“O.D. compression fitting.

Waste outlet is 1-1/2” PVC pipe. Plumbing connections vary depending on how the unit is

configured during assembly. Please consult the installation drawings below for supply and

waste fitting arrangements and assembly for your specific model.

MAINTENANCE: Refer to 6518.2FR Operation and Maintenance Sheet for more information.

INSTALLATION PROCEDURE

Follow the installation procedures outlined in the installation diagrams for your specific model

below. Note: 3602FR version must be connected to Haws Model 6518.2FR freeze resistant

bury valve, sold separately. See 6518.2FR installation manual for instructions.

GENERAL NOTES:

1. For all compression fitting connections, only connect NSF-61 copper or plastic

3/8”outside diameter tubing. The following assembly instructions must be

followed to ensure a watertight connection:

a. Cut tubing square and clean. Deburr if necessary.

b. Place compression nut and ferrule over end of tubing.

c. For plastic tubing (must be ¼” inside diameter), insert supplied tubing

insert into end of tubing.

d. Push tube into the fitting until it bottoms out.

e. Thread nut onto fitting and tighten snugly with 5/8”wrenches.

09/10/2021 Model 3602FR Page 3 of 12

*For more information about Haws products, see our website: www.hawsco.com

HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

Tube Sizes

O.D.

Tolerance

Insertion Depth

3/8”

±.005”

3/4”

TROUBLESHOOTING

PROBLEM

REPAIR CHECKLIST

Insufficient bubbler flow

1a.

Check that inlet screwdriver stop valve

is wide open (Not Supplied).

Verify minimum 30 psi flowing supply

pressure.

Adjust valve to increase flow. See

6518.2FR Manual.*

MODEL 5703M

BUBBLER HEAD

MODEL 5881PBA

BUTTON ASSEMBLY

(FR MODELS)

PARTS BREAKDOWN

REPLACEMENT PARTS

0006983506

SPANNER WRENCH

(NON FR MODELS)

0510001030

HEX BIT,

PINNED, 5/32"

0510001029

HEX BIT,

PINNED, 1/8"

OPTIONAL ACCESSORIES

PAGE 4 OF 12

3602FR

MODULAR OUTDOOR FOUNTAIN SYSTEM

MODEL MTG.3600

INSTALLATION AID

ITEM

PART NUM

DESCRIPTION

THIS TABLE NOT USED.

LEFT HERE FOR FUTURE.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT

IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

APPROVED:

DRAWN:

PART NUMBER

SCALE:

REVISION

DHP

6/11/20

1:2

09/16/21

DRAWING TYPE:

SIZE: A

5652

BY:

BJM

PARTS BREAKDOWN

DATE:

REV. ECN:

5719

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ECN:

WHEN ORDERING PARTS, PLEASE

SPECIFY PART NUMBER

SHEET 1 OF 2

0580001169

HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.

3602FR

MODEL 3671 PEDESTAL ARM ASSEMBLY

MODEL 3680FR* FOUNTAIN ASSEMBLY

(PUSH BUTTON SHOWN IS FOR REF. ONLY,

ACTUAL PUSH BUTTON IS DIFFERENT STYLE)

MODEL 3690FR* BOTTLE FILLER ASSEMBLY

(PUSH BUTTON SHOWN IS FOR REF. ONLY,

ACTUAL PUSH BUTTON IS DIFFERENT STYLE)

MODEL 3674 PEDESTAL ASSEMBLY

AVAILABLE SUB COMPONENT MODELS

PARTS BREAKDOWN

3602FR

MODULAR OUTDOOR

FOUNTAIN SYSTEM

*FR (FREEZE RESISTANT) MODELS REQUIRE

THE USE OF SEPARATE FREEZE RESISTANT

VALVES (NOT SUPPLIED). SEE INSTALLATION

DRAWINGS ON THE FOLLOWING PAGES FOR

DETAILS.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT

IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

APPROVED:

DRAWN:

PART NUMBER

SCALE:

REVISION

DHP

6/11/20

1:16

09/16/21

DRAWING TYPE:

SIZE: A

5652

BY:

BJM

PARTS BREAKDOWN

DATE:

REV. ECN:

5719

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ECN:

WHEN ORDERING PARTS, PLEASE

SPECIFY PART NUMBER

SHEET 2 OF 2

0580001169

HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.

PAGE 5 OF 12

3602FR

31"

787mm

16"

406mm

27"

687mm

34 3/4"

882mm

41 1/2"

1053mm

ADA STANDING

PERSON'S HEIGHT

ADA WHEELCHAIR

ACCESSIBLE HEIGHT

CONCRETE ANCHORS INCLUDED.

RE-USABLE TEMPLATE MODEL MTG.3600

AVAILABLE, SOLD SEPARATELY.

21"

533mm

10"

254mm

10"

254mm

10"

254mm

10"

254mm

21"

533mm

LOWER ACCESS

SIDE PANEL

BOTH SIDES

FULL HEIGHT

ACCESS PANEL

FRONT

HAWS MODEL 3602FR IS FULLY COMPLIANT WITH

THE FEDERAL 2010 AMERICANS WITH

DISABILITIES ACT (ADA) ACCESSIBILITY

REQUIREMENTS WHEN INSTALLED AS SHOWN

HERE AND WHEN INSTALLED WITH PROPER

CLEARANCES AND ACCESS. LOCATE THE

PEDESTAL BASE WITH AT LEAST 8" OF CLEAR

UNOBSTRUCTED HARDSCAPE BEHIND THE

PEDESTAL. IT IS THE RESPONSIBILITY OF THE

INSTALLER TO ADHERE TO LOCAL, STATE,AND

FEDERAL CODES WHEN INSTALLING THIS UNIT.

DISTANCE TO SURROUNDING OBJECTS,

APPROACH SURFACES, ETC. SHOULD BE

CONSIDERED.

NOTES:

1. WHEN INSTALLING THIS UNIT, LOCAL, STATE, OR FEDERAL CODES SHOULD BE ADHERED TO.

INSTALL A TRAP IN THE WASTE LINE AND A SCREWDRIVER STOP IN THE SUPPLY LINE IF

REQUIRED.

NOTE: PUSH BUTTONS SHOWN ARE FOR REF. ONLY,

ACTUAL PUSH BUTTONS ARE DIFFERENT STYLE.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT

IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

APPROVED:

DRAWN:

PART NUMBER

SCALE:

REVISION

DHP

6/11/20

1:24

09/16/21

DRAWING TYPE:

SIZE: A

5652

BY:

BJM

INSTALLATION

DATE:

REV. ECN:

5719

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ECN:

SHEET 1 OF 7

0580001169.D

3602FR

PAGE 6 OF 12

FRONT FACE

4X 5/8" BOLTS AND

WASHERS (SUPPLIED)

4X CAST-IN ANCHORS

(SUPPLIED). SET AT

7" SQUARE SPACING

AND ORIENT AS SHOWN

4X 1/4" FLAT HEAD

SCREWS

PLATE, ORIENT

AS SHOWN

4X 3/8" NUTS

4X 3/8" BOLTS

FOUNTAIN ARM

178mm

7/8"

21mm

MOUNTING HOLES

177mm

PLUMBING MUST FIT

WITHIN THIS AREA

SECTION E-E

4X 5/8" BOLTS

AND WASHERS

SUPPLIED WITH

ANCHORS

INSTALLATION INSTRUCTIONS

STEP 1

MOUNT PEDESTAL TO CONCRETE SLAB IN DESIRED

ORIENTATION. SLAB TO BE 30" MINIMUM SQUARE

AND 6" MINIMUM THICK (BY OTHERS). PLUMBING CAST

IN CONCRETE MUST FIT IN 7" DIAMETER AREA CENTERED

UNDER PEDESTAL LOCATION. FOR 3602FR MODEL, SEE

REQUIRED BURY VALVE (NOT SUPPLIED) INSTALLATION

REQUIREMENTS ON SHEET 6.

MODEL MTG.3600

(OPTIONAL)

TEMPLATE FOR

SPACING ANCHORS

DURING CONCRETE

POUR

STEP 2

REMOVE BOTTOM COVER PLATES FROM ARMS BY

REMOVING 3 1/4" BUTTON HEAD SCREWS.

INSTALL ONE FOUNTAIN ARM ON RIGHT SIDE AS

SHOWN. USE 1/4" FLAT HEAD SCREWS (SUPPLIED) TO

INSTALL PLATE. USE 3/8" BOLTS AND NUTS (SUPPLIED)

AND TORQUE TO 18 FT-LBS TO INSTALL ARM.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT

IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

APPROVED:

DRAWN:

PART NUMBER

SCALE:

REVISION

DHP

6/11/20

1:24

09/16/21

DRAWING TYPE:

SIZE: A

5652

BY:

BJM

INSTALLATION

DATE:

REV. ECN:

5719

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ECN:

SHEET 2 OF 7

0580001169.D

3602FR

PAGE 7 OF 12

FOUNTAIN ASSEMBLY

(FOUNTAINS INTERCHANGEABLE)

4X 3/8" BOLTS AND NUTS,

INSTALL VIA FRONT

ACCESS PANEL

TRIM RING

FRONT FACE

FOUNTAIN ASSEMBLY

(FOUNTAINS INTERCHANGEABLE)

4X 3/8"

BOLTS & NUTS,

INSTALL FROM

UNDERSIDE

TRIM RING

INSTALLATION INSTRUCTIONS

STEP 3

PLACE SQUARE TRIM RING ON TOP OF PEDESTAL AND

PLACE ONE FOUNTAIN ASSY. ON TOP OF TRIM RING, FACING

THE FRONT. USE 3/8" BOLTS AND NUTS VIA THE FRONT

ACCESS PANEL TO SECURE FOUNTAIN ASSY. TO PEDESTAL.

PLACE TRIM RING AND INSTALL 2ND FOUNTAIN ASSY. ON ARM AS

SHOWN. CAREFULLY CENTER TRIM RINGS AND TORQUE BOLTS

AND NUTS TO 18 FT-LBS

NOTE: PUSH BUTTONS SHOWN ARE FOR REF. ONLY,

ACTUAL PUSH BUTTONS ARE DIFFERENT STYLE.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT

IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

APPROVED:

DRAWN:

PART NUMBER

SCALE:

REVISION

DHP

6/11/20

1:24

09/16/21

DRAWING TYPE:

SIZE: A

5652

BY:

BJM

INSTALLATION

DATE:

REV. ECN:

5719

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ECN:

SHEET 3 OF 7

0580001169.D

3602FR

PAGE 8 OF 12

28 1/2"

724mm

TEE ELEVATION

FOR ADA

WHEELCHAIR

POSITION

WASTE BEND

2X COMPRESSION

NUT AND RED

COMPRESSION

WASHER

2X COMPRESSION NUT AND

BLACK COMPRESSION

WASHER

PVC TRAP ADAPTER IS GLUED

INTO PVC TEE

1-1/2" PVC TEE

1-1/2" PVC DRAIN PIPE

WASTE LINE INSTALLED PER LOCAL

CODES AND STANDARDS

8" TAIL PIECE

STEP 4

INSTALL SUPPLIED DRAIN COMPONENTS AS SHOWN. RED COMPRESSION

WASHERS ADAPT FROM 1-1/4" TO 1-1/2" AT EACH DRAIN TAIL PIECE. BLACK

COMPRESSION WASHERS ARE USED IN TRAP ADAPTERS AT TEE.

USE APPROPRIATE PVC CEMENT TO MAKE SOLVENT CEMENT

CONNECTIONS. TRIM WASTE BEND AND/OR TAIL PIECE LENGTH IF

REQUIRED. NOTE THAT EXTRA PARTS MAY BE INCLUDED TO FACILITATE

OTHER CONFIGURATIONS OF THIS FOUNTAIN.

INSTALLATION INSTRUCTIONS

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT

IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

APPROVED:

DRAWN:

PART NUMBER

SCALE:

REVISION

DHP

6/11/20

1:24

09/16/21

DRAWING TYPE:

SIZE: A

5652

BY:

BJM

INSTALLATION

DATE:

REV. ECN:

5719

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ECN:

SHEET 4 OF 7

0580001169.D

3602FR

PAGE 9 OF 12

TUBING INSULATION

(SUPPLIED) OVER

3/8" TUBING (SUPPLIED)

2X COMPRESSION

STRAIGHT CONNECTORS

WITH INSERTS, FERRULES,

AND NUTS (SUPPLIED)

PNEUMATIC

TUBING FOR

BURY VALVE

ACTUATION

(NOT

SUPPLIED)

3602FR SUPPLY PLUMBING*

FROM BURY VALVES

(NOT SUPPLIED)

TO NOZZLE

STEP 5

COMPLETE WATER SUPPLY PLUMBING AS SHOWN. OPEN SUPPLY

VALVE(S) AND TEST. REPLACE ARM BOTTOM PLATES AND PEDESTAL

ACCESS PLATES. BURY VALVES (NOT SUPPLIED) ARE REQUIRED FOR 3602FR

INSTALLATION. REFER TO BURY VALVE OPERATION AND MAINTENANCE

MANUAL FOR ADDITIONAL INFORMATION.

* SEE NEXT SHEET OF THIS DRAWING

FOR MORE INFORMATION ON INSTALLING

BURY VALVES WITH THIS MODEL.

INSTALLATION INSTRUCTIONS

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT

IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

APPROVED:

DRAWN:

PART NUMBER

SCALE:

REVISION

DHP

6/11/20

1:24

09/16/21

DRAWING TYPE:

SIZE: A

5652

BY:

BJM

INSTALLATION

DATE:

REV. ECN:

5719

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

ECN:

SHEET 5 OF 7

0580001169.D

3602FR

PAGE 10 OF 12

Inhaltsverzeichnis

Beliebte Freiluftbrunnen Handbücher anderer Marken

Sunnydaze Decor

Sunnydaze Decor XSS-578 Bedienungsanleitung

Campania International

Campania International Bibendum FT-400 Bedienungsanleitung

Elkay

Elkay FLEXI-GUARD EFHA8 1M Series Installationshandbuch

S.R.Smith

S.R.Smith Color Light Stream 2CLSLBK Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Cascade 1500 Bedienungsanleitung

Campania International

Campania International Juliet Fountain Bedienungsanleitung

YARDART

YARDART FT-155 Bedienungsanleitung

Alpine

Alpine WIN732 Bedienungsanleitung

Campania

Campania Valencia Bedienungsanleitung

Campania International

Campania International FT-320 Bedienungsanleitung

GardenWize

GardenWize SWGSL230 Bedienungsanleitung

Kelkay

Kelkay Easy Fountain Rustic Windmill Bedienungsanleitung

Alpine

Alpine WIN258 Bedienungsanleitung

Bond

Bond Signature Series Bedienungsanleitung

Kenroy Home

Kenroy Home 51112COPBL Installationsanleitung

EasyPro

EasyPro Tranquil Décor HBB39 Bedienungsanleitung

Angelo Decor

Angelo Decor Castillo Bedienungsanleitung

Campania International

Campania International Girona FT-102A Bedienungsanleitung