Haws 3511 Leitfaden

10/19 Model 3511 Page 1 of 4

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: [email protected]  website: www.hawsco.com

No. 0002074001 (18)

Model 3511

Drinking Fountain

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

LIMITED WARRANTY

HAWS warrants that this specific product is guaranteed against defective material

or poor workmanship for a period of one year from date of shipment. HAWS

liability under this warranty shall be discharged by furnishing without charge F.O.B.

HAWS Factory any goods, or part thereof, which shall appear to the Company upon

inspection to be of defective material or not of first class workmanship, provided that

claim is made in writing to Haws within a reasonable period after receipt of the

product. Where claims for defects are made, the defective part or parts shall be

delivered to the Company, prepaid, for inspection. HAWS will not be liable for the

cost of repairs, alterations or replacements, or for any expense connected therewith

made by the owner or his agents, except upon written authority from HAWS,

Sparks, Nevada. HAWS will not be liable for any damages caused by defective

materials or poor workmanship, except for replacements, as provided above. Buyer

agrees that HAWS shall not be liable for general, special, or consequential

damages claimed to arise under the contract of sale. The drinking fountain

manufactured by HAWS is warranted to function if installation and maintenance

instructions provided are adhered to. The units also must be used for the purpose

for which they were intended.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,

PROVIDED OR GIVEN BY HAWS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

10/19 Model 3511 Page 2 of 4

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12"

adjustable wrench, 10" pipe wrench, 9/16”, 1/2”, 7/16” socket wrench or open-end

wrench, 5/32” hex key wrench.

LOCATION OF UNIT: The Model 3511 Drinking Fountain is a wheelchair accessible

drinking water facility. The height dimensions shown, meet current ADA

requirements. When installing this unit, local, state or federal codes should be

adhered to. If height other than shown is required, then dimensions must be adjusted

accordingly.

SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6

ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet

filter is recommended.

PLUMBING CONNECTIONS: Inlet is 3/8”O.D. compression fitting. Waste outlet is

1-1/2” O.D. tailpiece.

MAINTENANCE: Periodically clean the strainer. Refer to 5874 Series Valve Manual

for more information.

TROUBLESHOOTING

PROBLEM

REPAIR CHECKLIST

Insufficient bubbler flow.

1a.

Check that inlet screwdriver stop valve

is in wide-open position.

Verify minimum 30 psi flowing supply

pressure.

Clean strainer. See 5874 Series Valve

Manual.

Adjust valve to increase flow. Use

front adjust screw or see 5874 Series

Valve Manual.

Clean screens (inside nozzle body).

Unscrew nozzle insert and very gently

activate water supply to pop out qty. 3

screens (be careful not to lose

screens). Remove any debris clogging

the screen openings and place back

into nozzle body. Reassemble nozzle

insert.

General Notes:

Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to

ensure correct engagement with O-Ring.

For more information about Haws products, see our website: www.hawsco.com

HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

5705

BUBBLER HEAD

STRAINER

0005624292

5874PB VALVE

MODEL 6250LF BIB FAUCET

(OPTIONAL)

MUST BE USED WITH 6250LF

SPANNER WRENCH

0006983506

ACCESS PLATE

0004521763 6635

SAND TRAP

W/MOUNTING PLATE

(OPTIONAL)

STYLE B

(TUBING CONNECTS TO

INSERT ASSY)

FOUNTAIN COULD HAVE EITHER STYLE

STYLE A

(TUBING CONNECTS

TO ELBOW)

ROTATED 90° INTO VIEW

DETAIL A

(OPTIONAL)

FOR REMOVAL

OF NOZZLE

WITH TUBE

0002082253

(OPTIONAL)

APPROVED

DRAWN

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BYECN NO.

DATE

ECN:

REVISED PER

CHKD

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.

P.M.

05-03-00

0002074001

3511

1:4

12/09/19

PARTS BREAKDOWN

5438

2019

PARTS BREAKDOWN

NOTES:

1 5874PB INCLUDES VRK5874 CARTRIDGE ASSEMBLY AND PBA7

RECESSED PUSH BUTTON.

2 ENSURE TUBE IS DISCONNECTED FROM PUSH BUTTON VALVE

BODY PRIOR TO REMOVAL. APPLY ONE DROP OF LOCTITE

222MS TO NOZZLE THREADS PRIOR TO FASTENING BACK ONTO

BUBBLER HEAD. RE-ATTACH TUBE TO VALVE.

3 IMPORTANT: IF HOSE BIB IS USED ALONG WITH A SAND TRAP, IT

MUST BE USED WITH SAND TRAP 6611. CANNOT OFFER HOSE BIB

AS OPTION WITH SAND TRAP 6635. IF HOSE BIB IS PURCHASED,

ACCESS PLATE, 0004521763, MUST BE USED.

PBA7 PUSH

BUTTON ASSY

VRK5874 VALVE

REPAI R KIT

5705LAMIN

(OBSOLETE -

SHOWN FOR

REFERENCE

ONLY.)

152mm

27"

29 3/8"

746mm

686mm

248mm

9 3/4"

MOUNTING DETAIL

248mm

9 3/4"

(SUPPLIED)

359mm

14 1/8""

76mm

457mm

18"

(TO SPOUT

OUTLET) (TO SPOUT OUTLET)

NOTES:

0004521763

1/2" NPT INLET

BIB FAUCET DETAIL

(OPTIONAL)

6250LF

BIB FAUCET INLET

STRAINER

1/2" NPT SCREWDRIVER

STOP, COMPRESSION

FITTING & 3/8" O.D. TUBING

(NOT SUPPLIED)

36"

914mm 40"

1016mm

1. REFER TO 5874 SERIES OPERATION AND

MAINTENANCE MANUAL FOR PUSH BUTTON

AND VALVE INSTALLATION/MAINTENANCE

INSTRUCTIONS.

1 1/2" O.D. TAILPIECE

SAND TRAP

MODEL 6635

W/MOUNTING PLATE

(OPTIONAL)

WASTE

(NOT SUPPLIED)

FINISHED GRADE

(NOT SUPPLIED)

1/2" IPS SUPPLY

SCREWDRIVER STOP

30" SQUARE

CONCRETE SLAB

(NOT SUPPLIED)

1/2-13 ANCHORS

W/MOUNTING

HARDWARE

(SUPPLIED)

1/2" NPT

1/2" TUBING AND

COMPRESSION FITTINGS

(NOT SUPPLIED)

1/2" TEE

(SUPPLIED)

ACCESS PLATE

(OPTIONAL)

1-1/2" O.D TAILPIECE

2. OPTIONAL SAND TRAP MODEL 6635 W/ MOUNTING

PLATE AND 1-1/2" O.D. TAILPIECE. SEE MODEL 6635

FOR ADDITIONAL INSTALLATION INSTRUCTIONS.

APPROVED:

DRAWN:

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

DATE:

ECN:

REVISED PER

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

P.M.

05-30-00

0002074001.D

3511

1:8

12/09/19

INSTALLATION

5438

2019

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

Kohler

Kohler K-6228 Montageanleitung

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Bedienungsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Fortis

Fortis MILANO 78211JS Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Moen

Moen 5922 Series Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung