Hayward HP40BEE Bedienungsanleitung
[ HP50BEE ]
VARIABLE-SPEED
Swimming Pool Heat Pump
[ HP50BEE ]
VARIABLE-SPEED
Swimming Pool Heat Pump
[ HP40BEE ]
[ HP50BEE ]
[ HP65BEE1 ]
2
Content
I. Application ...................................................................................... 4
II. Features ......................................................................................... 4
III. Technical Parameter ...................................................................... 5
I . Dimension ...................................................................................... 6
. Installation instruction ..................................................................... 7
I. Operation instruction .................................................................... 11
II. Testing .......................................................................................... 12
III. Precautions .................................................................................. 13
IX. Maintenance ................................................................................. 14
X. Trouble shooting for common faults ............................................. 15
3
Thank your choosing a Hayward heat pump. Please read this instruction
manual carefully and operate strictly according to the user manual
before starting the heat pump, otherwise the heat pump may be
damaged or cause you unnecessary harm.
Special Attention:
A. This product is only for swimming pool water heating applications and
can’t be used for the heating for any other liquid materials.
B. The inlet and outlet water nozzles can’t bear the weight of external
pipes.
C. The main power switch should be out of the reach of children.
D. Make sure the power is switched off before opening the case.
NOTE:
A. The swimming pool heat pump must be installed by a qualified
electrician.
B. To maximize your swimming comfort, set proper heating temperature.
C. Don’t put obstacles near the air inlet and outlet of the heat pump.
D. This heat pump has power-off memory function.
E. When the ambient temperature is below 0 degree, make sure to
switch off the main power, and drain off the water from heat exchanger.
F. Never place your hand or any other object in the air inlet or outlet of
the heat pump.
G. If any abnormal circumstances discovered, ex: abnormal noise,
smells, smokes and leakage of electricity, switch the main power off
immediately and contact your local dealer/installer. Do not try to repair
the heat pump yourself.
4
I. Application
1- Set swimming pool water temp efficiently and economically to
provide you comfort and pleasure.
2- User may choose the model technical parameter according to
professional guide, this series of swimming pool heater has been
optimized in factory (refer to technical parameter table).
II. Features
1-
Sensitive and accurate temp control and water temp display.
2-
High pressure and low pressure protection.
3-
Protection in case of too low or no water flow
4-
Exceeding low temp auto stop protection.
5-
Temp control compulsory defrosting.
6-
International brand compressor.
7-
High efficient titanium heat exchanger
8-
Easy installation and operation.
5
III. Technical Parameter
Model HP4 BEE HP5 BEE HP65BEE1
oltage 208-230 208-230 208-230
Frequency/phase 60Hz/1Ph 60Hz/1Ph 60Hz/1Ph
Heating current
(air80°F,water80°F)
1.4-7.5A 1.6-10.2A 2.5-13.1A
Heating power
(air80°F,water80°F)
0.28-1.75kW 0.30-2.3kW 0.56-3kW
Design pressure(High)
≤609 PSIG ≤609 PSIG ≤609 PSIG
Design pressure(Low) ≤261 PSIG ≤261 PSIG ≤261 PSIG
Refrigerant(R410A) 31.7oz 38.8oz 45.9oz
Net weight 48KG 52KG 62KG
Water circulation flow 67-100L/min 83-117L/min 108-142L/min
Noise ≤50 dB(A) ≤50 dB(A) ≤50 dB(A)
Waterproof class IPX4 IPX4 IPX4
Notice:
1.
This product works well under water temp 80
o
F to104
o
F, air temp 32
o
F to 109
o
F,
efficiency will not be guaranteed out of this range. Please take into consideration that
the pool heater performance and parameters are different under various conditions.
2.
Related parameters are subject to adjustment periodically for technical
improvement without further notice. For details please refer to nameplate.
6
IV. Dimension
※ Above data is subject to modification without notice.
Note:
The picture above is the specification diagram of the pool heater, for
technician’s installation and layout reference only. The product is subject
to adjustment periodically for improvement without further notice.
A B C D E F G H
HP40BEE 315
590
312
340
961
290
74
658
HP50BEE 315
590
312
340
961
330
74
658
HP65BEE1 395
590
390
420
961
360
74
658
Name
Size(mm)
Model
C
H
D
A
E
FG
B
7
V. Installation instruction
1. Drawing for water pipes connection.
（Notice：The drawing demonstration and layout of the pipes is only for reference.）
2. Electric Wiring Diagram
Note：The swimming pool heater must be grounded.
8
Options for protecting devices and cable specification
※ Above data is subject to modification without notice.
Note: The above data is adapted to power cord ≤ 10 m. If power cord is
＞10 m, wire diameter must be increased. The signal cable can
be extended to 50 m at most.
2. Installation and Requirements
The swimming pool heater must be installed by a pool professional. End
users are not qualified to install the heater. Damage may occur to the
heater or threaten the safety of the user.
A. Installation
1) The swimming pool heater should be installed in a location with good
ventilation;
2) The frame must be fixed by bolts (M10) to concrete foundation or
brackets. The concrete foundation must be solid and fastened; the
bracket must be strong and antirust treated;
3) Don’t stack substances that will block air flow near inlet or outlet area,
and no barrier within 20in behind the main heater, or the efficiency of the
heater will be reduced or even haulted;
4) The heater needs an appended pump (Supplied by the user). The
recommended pump specification-flux: refer to Technical Parameter,
Max. lift ≥10m;
MODEL HP4 BEE
HP5 BEE
HP65BEE1
Breaker
Rated Current A
12 15 18
Rated Residual
Action Current mA
30 30 30
Fuse A
12 15 18
Power Cord (mm²)
3×2.5 3×2.5 3×4
Signal cable (mm²)
3×0.5 3×0.5 3×0.5
9
5) When the heater is running, there will be condensation water
discharged from the bottom. Please hold the drainage nozzle
(accessory) into the hole and attach it well, then connect a pipe to
drain the condensation water out.
Ｂ．Wiring
1) Connect to appropriate power supply; the voltage should comply
with the rated voltage of the products.
2) Heater must be grounded.
3) Wiring must be handled by a professional technician according to
the circuit diagram.
4) Set leakage protector according to the local code for wiring (leakage
operating current ≤ 30mA).
5) The layout of power cable and signal cable should be orderly and
not interfere with each other.
C．Switch on after finishing all wiring construction and
re-checking.
10
Pay attention to the following points:
1． The heat pump must be installed OUTSIDE in a well ventilated area to avoid air
recirculation, or in a place with adequate room for both installation and
maintenance. Please refer to the following illustration:
A minimum of 300mm of clearance from walls, shrubbery, equipment, etc. is required around the
entire pump circumference. This allows for ample air intake. No less than 800mm clearance on
the air outlet is required to prevent recirculation of air. e recommend to not place the unit
underneath eaves, decks, or porches, as this causes recirculation of discharged air, or the
efficiency of the heater will be reduced or even stopped.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere Hayward Wärmepumpe Handbücher
Hayward
Hayward AccessLine HP3051DT3HM Service-Handbuch
Hayward
Hayward HP55TR Service-Handbuch
Hayward
Hayward Heat Pump Bedienungsanleitung
Hayward
Hayward Energyline Pro Inverter Series Service-Handbuch
Hayward
Hayward HeatRelax HPR06M Service-Handbuch
Hayward
Hayward HP50B Bedienungsanleitung
Hayward
Hayward HP50AEE Service-Handbuch
Hayward
Hayward Easy Temp Bedienungsanleitung
Hayward
Hayward HP50CL Service-Handbuch
Hayward
Hayward ENERGYLINE INVERTER Series Bedienungsanleitung
Hayward
Hayward HP50CLEE Service-Handbuch
Hayward
Hayward EnergyLine pro Service-Handbuch
Hayward
Hayward SUPREME HP60TR Service-Handbuch
Hayward
Hayward POWERLINE 15-81500 Service-Handbuch
Hayward
Hayward S.Line Pro Fi 25kW Bedienungsanleitung
Hayward
Hayward Easy Temp ECP 06 Kurzanleitung
Hayward
Hayward ENERGYLINE PRO INVERTER Service-Handbuch
Hayward
Hayward Summit Heat Pump Bedienungsanleitung
Hayward
Hayward EasyTemp ECPI15MA Service-Handbuch
Hayward
Hayward ENERGYLINE PRO ENPI4MA Service-Handbuch
Beliebte Wärmepumpe Handbücher anderer Marken
Mitsubishi Electric
Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung
Dimplex
Dimplex LI 16I-TUR Benutzerhandbuch
Carrier
Carrier WSHP Open v3 Kurzanleitung zur Einrichtung
TGM
TGM CTV14CN018A Bedienungsanleitung
Carrier
Carrier 38MGQ Series Bedienungsanleitung
Kokido
Kokido K2O K880BX/EU Fehlerbehebungshandbuch
