HDL M/P2R.1 Bedienungsanleitung
Overview
KNX Granite (See Figure 1-2) is a multi-function panel, which supports multiple control modes. It is em-
bedded with RGB light for each button. Any color and brightness of label backlight and button indicator
can be set in ETS software.
Functions
■Mechanical buttons and button backlights are available;
■Supports button work modes: Left & right button combination mode or independent button mode;
■Adjustable color and brightness of the label backlight and button indicator;
■Supports multiple control modes: Switch control, dimming control, Shutter control, Flexible control,
Scene control, Sequence control, Percentage control, Threshold control, String (14 bytes) control,
Alternate control, RGB control, Fan control, Thermostat control, Combination control;
■With built-in temperature probe, the panel can automatically obtain the temperature information;
■The button indicator can be displayed mutual exclusively;
■Press the top left corner and the lower right corner button(A1 and A4 for M/P2R.1, A1 and A6 for M/
P3R.1) simultaneously for 2 seconds, the panel will enter programming mode.
Important Notes
■The panel must be wall box mounted.
■It must work in conjunction with the power interface (M/PCI.1-A in conjunction with EU panel, M/
PCI.3-A in conjunction with US panel).
■The device is compliant with KNX standard and the parameters are set by the Engineering Tool
Software (ETS).
Product Information
Safety Precautions
■The installation and commissioning of the device must be carried out by HDL or the organization
designated by HDL. For planning and construction of electric installations, the relevant guidelines,
regulations and standards of the respective country are to be considered.
■The device should be wall box mounted. HDL takes no responsibility for all consequences caused by
installation and wire connection which are not in accordance with this document.
■Please do not privately disassemble the device or change components, otherwise it may cause
mechanical failure, electric shock, fire or body injury.
■Please resort to our customer service department or designated agencies for maintenance service.
The warranty is not applicable for the product fault caused by private disassembly.
Dimensions - See Figure 3 - 8
1. Control button: It is used to control the status of the targets
2. Label backlight: It is for label backlight. The brightness can be automatically adjusted. The color and
brightness of the indicator can be customized by user.
3. Button indicator: It is used to indicate the status of the targets. The color and brightness of the indicator
can be customized by user.
4. Communication interface: It connects to panel power interface.
5. Fastener: It connects to panel power interface.
Programming: Press the top left corner and the lower right corner button(A1 and A4 for M/P2R.1, A1 and
A6 for M/P3R.1) simultaneously for 2 seconds, the panel will enter programming mode.
Product installation and disassembly (Take M/P2R.1 as an example)
Installation - See Figure 9 - 11
Step 1. Fix the power interface into the wall box with screws.
Step 2. Hold the edge of the panel, then insert the panel into the power interface module vertically.
Disassembly - See Figure 12
Step 1. Insert the panel gap with a slotted screwdriver.
Step 2. Pry up the panel gently and hold the edge panel. Then the panel can be taken off.
Glass replacement - See Figure 13 - 16 (Take M/P3R.1 as an example)
Step 1. Insert the split gap on the left and right of the metal covers and the right split gap of the glasses
with a slotted screwdriver, and pry gently, then remove the metal covers and glasses.
Step 2. Align the new glasses and the original metal covers with the panel buckle and gently press to
complete the glass replacement.
M/P2R.1
KNX Granite/Metal Push Button Panel EU
M/P3R.1
KNX Granite/Metal Push Button Panel US
Hardware Version: A
Datasheet
Issued: July 26, 2019
File Edition: V1.0.0
1/2
Package Contents
M/P2R.1 or M/P3R.1*1 / Datasheet*1
Customizable label
Figure 1. M/P2R.1 Figure 2. M/P3R.1
Figure 3
86mm
1
3
2
60mm
4
5
11mm
21mm
86mm
Figure 4 Figure 5
M/P2R.1
A1
A4
Figure 3 - 5. Dimensions
60mm
83mm
11mm
21mm
86mm
116.5mm
Figure 6 Figure 7 Figure 8
M/P3R.1
A1
A6
Figure 6 - 8. Dimensions
Basic Parameters
Working voltage 21~30V DC
Working current 6mA / 30V DC
Communication KNX
Cable diameter of KNX terminal 0.6 - 0.8mm
External Environment
Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%
Specifications
Dimensions M/P2R.1: 86×86×11(mm)
M/P3R.1: 86×116.5×11(mm)
Net weight M/P2R.1: 109g
M/P3R.1: 138g
Housing material Glass, PC, ABS, Aluminum
Installation Wall box (See Figure 9 - 11)
Protection rating (Compliant with EN 60529) IP20
Technical Data
2/2
Figure 11 Figure 10 Figure 9
2 1
Figure 9 –11. Installation
Figure 12. Disassembly
Figure 13
Figure 14
Figure 15
Figure 16
Figure 13 –16. Glass replacement
Name and Content of Hazardous Substances in Products
Components
Hazardous substances
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Chromium VI
(Cr (VI))
Poly-brominated
biphenyls
(PBB)
Poly-brominated
diphenyl ethers
（PBDE）
Plastic o o o o o o
Hardware o o o o - -
Screw o o o ×- -
Solder ×o o o - -
PCB ×o o o o o
IC o o o o ××
Glass o o o o o o
Technical support
E-mail: hdltickets@hdlautomation.com
Website: https://www.hdlautomation.com
©Copyright by HDL Automation Co., Ltd. All rights reserved.
Specifications subject to change without notice.
KNX Cable Guide
KNX KNX Cable
+ Red
- Black
The symbol “-” indicates that the hazardous substance is not contained.
The symbol "o" indicates that the content of the hazardous substances in all the homogeneous materials
of the component is below the limit requirement specified in the Standard IEC62321-2015.
The symbol “×” indicates that the content of the hazardous substance in at least one of the homogeneous
materials of the part exceeds the limit requirement specified in the Standard IEC62321-2015.
Dieses Handbuch passt für folgende Modelle
1
Andere HDL Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
