HDL SB-DN-Logic960 Bedienungsanleitung
User Manual
Logic timer module
SB-DN-Logic960
Usable also for HDL-MCLog.431
Manual describes the snapshots taken in the
previous version of HBST. In HBST2, the graphic
appearance is slightly different but the functions
remain the same.
User Manual
SB-DN-Logic960
Logic timer–User Manual
INDEX
1. Overview...................................................................................................1
1.1 General Information.............................................................................1
1.1.1 Description .................................................................................1
1.1.2 Mounting.....................................................................................1
1.2 functionalities.................................................................................1
1.3 Device Description...............................................................................2
2. Technical Data..........................................................................................2
3. Installation................................................................................................3
3.1 Wiring ..................................................................................................3
4.2 HDL BUS Pro Description....................................................................3
4. Software Configurations.........................................................................4
4.1 Basic setting ........................................................................................4
4.1.1 Change the ID of the device...........................................................4
4.1.2 Remark ..........................................................................................5
4.2 Configurations ......................................................................................5
4.2.1 Equipment activation......................................................................5
4.2.2 Input conditions..............................................................................5
4.3 system setting.....................................................................................13
4.3.1: Date settings for timer.................................................................13
4.3.2 Geographic location settings........................................................13
4.3.2.1 Geographic location..................................................................13
4.3.3 Method of prayer times ................................................................14
4.3.4 Summer time settings ..................................................................14
5 applications...............................................................................................15
5. NOTES....................................................................................................22
User Manual
SB-DN-Logic960
Logic timer –User Manual 1
1. Overview
1.1 General Information
1.1.1 Description
SB-DN-Logic960 is an intelligent programmable logic controller which is developed by
HDL, it can control the system automatically by logic lines such as: - scene, channel
status, input status, date, time and so on. You can use AND, OR, NAD and NOR logic
blocks to build up different logics for different applications, moreover, it has real-time clock
so you can build up schedules too.
1.1.2 Mounting
Standard 35mm Din Rail Installation
Inside Distribution Box(DB)
1.2 functionalities
Supports 12 logic groups and each group have 20 logic tables.
Each logic table can set 4 logic input condition and 20 input targets.
Logical table input condition: Time, Date, Year, Week, Scene working status, external
device input status, Wall panel status, and security setting.
Logic relation: AND, OR, XOR, NAND
User Manual
SB-DN-Logic960
Logic timer –User Manual 2
1.3 Device Description
2. Technical Data
Electric Parameter ：
Bus power
DC12~30V
Bus power consumption
15mA/DC24V
Environmental Condition：
Working temperature
-5℃~45℃
Working relative humidity
Up to 92%
Storage temperature
-40℃~+60℃
Storage relative humidity
10%~93%
Approved
CE
RoHS
Production information：
Dimensions
72×88×66 (mm)
Installation
35mm Din Rail installation
Protection degree
IP20
a. LED indicator
b. programming button
c. HDL-bus pro
User Manual
SB-DN-Logic960
Logic timer –User Manual 3
3. Installation
3.1 Wiring
Please follow the wiring showed below strictly.
4.2 HDL BUS Pro Description
Connector Information
buspro
DC24V
Red
COM
Black
DATA-
White
DATA+
Yellow
User Manual
SB-DN-Logic960
Logic timer –User Manual 4
4. Software Configurations
4.1 Basic setting
4.1.1 Change the ID of the device
Each HDL-device has subnet and Device ID and each module’s Device ID must be unique
and different from other devices on the same Bus, the subnet ID should be the same as
the HDL-Bus gateway (typically the SB-DN-1IP or HDL-MBUS01IP.431).
Method One:
1. Run the HDL-BUS Pro Setup tool.
2. Long press the “programming button” and keep pressing it for 3 seconds until it turns to
a red color.
3. On the software, click ton “Address management”, and select
“Modify address (when device button is pressed)” option, it will show a window like
below:
4. click on “Indicate initial address”, then it will show the current subnet/device ID of this
User Manual
SB-DN-Logic960
Logic timer –User Manual 5
module. to modify the address, fill in the new address, and click the “Modify initial
address ”Click the “+Add” button, the device will be added to “ON-line devices “list.
Method two:
1- Run HDL-bus pro tool
2- Search for the online devices by clicking on search button and the device will be
displayed on “online device list”
4.1.2 Remark
To give a name to the module, so you can recognize it from other modules.
4.2 Configurations
As mentioned above the logic module is used for automating other HDL modules.
And in this tab, we will see how to setup a logic table with input conditions.
4.2.1 Equipment activation
If this option is unchecked, it means that the logic module has been disabled and will no
longer perform any process.
4.2.2 Input conditions
First select a logic table from the “logic No”list, double click on the blank black area to
start configuration and then select a logic relation from (AND, OR, XOR, NAND) according
to your requirements.
User Manual
SB-DN-Logic960
Logic timer –User Manual 6
-As the logic module is a very flexible automation device, there are many input conditions
that will be used to reach any possible logic, each logic table can have maximum of four
input conditions.
Below are the explanations of each logic input:-
User Manual
SB-DN-Logic960
Logic timer –User Manual 7
a) Year type:
This input is to select specific year, date or between years and dates.
b) Date type: You can specify date data with a numeric month.
Options:-
-At date point: select a designate or specific date for example: June 4th
-Date period: you can select interval of time (date), for example: from Oct 7th-Nov 30th
-Every month: this is the whole year settings.
c) Week type: you can select a specific week day or between weekdays (from specific day
to another) e.g.: from Monday- Friday
d) Time type: this is used to set a particular day time or before and after specific time.
User Manual
SB-DN-Logic960
Logic timer –User Manual 8
-specific time: select a particular time, you can also set the specific time as sunrise or
sunset (you need to set the time for sunrise and sunset on the system settings
tab)
e) Universal switch: is a general communication method for all modules, some devices
can send out UV switch to logic module. So you can set a UV switch as your input
condition.
f) Exterior input value
This function is used to detect an output value. For now it’s only used for temperature,
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere HDL Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
