Headsight HORIZON Bedienungsanleitung

HORIZONHORIZON®®

INSTALLATION & OPERATION MANUAL

HEADSIGHT.COM |574.546.5022

HEADER APPHEADER APP

CAPELLOCAPELLO

09062314a

About Headsight

Headsight Contact Info

Headsight, Inc.

4845 3B Road

Bremen, IN 46506

Phone: 574-546-5022

Fax: 574-546-5760

Email: info@headsight.com

Web: www.headsight.com

Technical Assistance

Phone: 574-220-5511

About this Manual

How to use this manual

The instructions in this manual are in the order that they should be completed for new installations.

Complete all applicable instructions in each section before proceeding. Note that some sections

are labeled to indicate they only apply to certain machines or applications. An index is available

in the front of the manual to help find technical information for previously installed systems.

This icon designates information

of which you should take note.

This icon indicates a special tool

needed for a given task.

This icon designates an

important instruction.

Suggestions

If you have any suggestions to improve this manual please call 574-546-5022 or email info@headsight.com.

Disclaimers

HEADSIGHT, HORIZON, PINPOINT, FORESIGHT, FEATHERSIGHT, TRUESENSE, TERRAHAWK,

INSIGHT, the Headsight logo, the Horizon logo, and Terrahawk logo are trademarks of

Headsight, Inc. All other trademarks are property of their respective owners.

Protected by one or more of the following patents and published applications:

US6883299; US7310931; US7647753; US9609806; US9609806; US10222410;

US10244680; EP2955993(DE,ES,FR,IT,UK); EP2956851 AU2004203614;

BR112015019262; BR112015019286; CA2900987; CA2900994; WO20180152266

Table of Contents

Installation�� 01

Before You Start �� 01

Horizon Base ��02

AllModels�� 02

Header "AUX" Harness ��02

Shaft Speed ��02

Deck Plate Sensor ��03

Folding Heads ��04

Settings �� 05

Horizon Setup ��05

Setup Screen ��05

Setshaftspeedalarms�� 05

Showshaftspeedalarm�� 05

Showdeckplateposition�� 05

Showmaintenancereminder�� 05

Operation�� 06

Home Screen ��06

DeckPlatePosition �� 06

ShaftSpeed�� 06

DeckplateAngle�� 06

FoldButton(Foldingheadsonly) �� 06

Advanced Info�� 07

Diagnostic Screen ��07

DetailedSignalVoltages�� 07

Lube Screen ��07

ServiceReminder/Lube �� 07

Diagnostics�� 08

Statement of Limited Warranty ��09

Installation

Before working on combine or under header always:

1. Perform all combine and header manufacturer

safety precautions for servicing header.

2. Insert stop to prevent movement of header.

3. Set combine parking brake.

4. Turn off combine and remove key from ignition.

5. Disconnect all drive shafts from the header.

Before You Start

Because of the complexity of the entire system, several different Installation

manuals may be provided for a complete installation. Kits may include:

• Header Sensor Manual

• Shows the installation of AHHC sensors for that specific header

• Includes sensor installation and sensor wire routing

• Horizon Manual

• Main manual showing installation and operation of the overall Horizon system

• Includes installation of controllers and wiring for various options

• Header App Manual

• Header specific manual for the “Application” of auxiliary sensing controls on various heads.

• Includes Installation and operation instructions for the header App.

1. Complete the sensor and wiring installation first.

2. Use this App manual along with the header installation portion of

the Horizon manual to complete the installation.

Installation

Horizon Base

All Models

1. For Deck Plate angle to read correctly, Horizon must

be mounted on back sheet of header as shown.

Header "AUX" Harness

1. Use HT9474

1. Connect Y904 to Y903 of Horizon main header harness.

Shaft Speed

1. Mount sensor bracket inline with center of hex shaft

using existing bolt (mount on gusset near Horizon box.)

2. Attach sensor to mount bracket and set 1/8inch

minimum clearance distance between the sensor

tip and the hex shaft at its high point.

3. Route speed sensor wire back toward Horizon

box following existing hoses and wiring.

4. Connect Y193 of adapter harness to speed sensor.

Installation

Deck Plate Sensor

1. Bolt sensor body to header gusset one row

left of center using

x ¾ bolts.

2. Remove bolt “A” from deck plate adjustment arm.

3. Discard washer and replace with bracket “B”.

• Replace bolt “A” being careful to align it in its original

place so end of bolt is in same detent on cross rod

4. Connect 10ft extension wire to pigtail on sensor.

5. Route the wire toward back of header being

careful to zip tie it away from main shaft.

6. Route wire along the hydraulic lines under header to

left of feederhouse and then up back of the header.

7. Connect wire to connector Y211 on adapter harness.

Installation

Folding Heads

For Capello Folding headers, connect Y147B to Y148 on main Horizon harness.

1. Use HT9274 - DIN solenoid adapter.

2. Remove cap from Y540 on Aux tail

3. Remove Deutsch pin lock from inside of cap, and

remove white sealing plugs from backside of cap.

4. Insert Orange wire into pin 1and Black wire into pin 2.

5. Reinstall Deutsch pin lock inside of connector.

6. Connect solenoid adapter to Y540 of adapter harness.

7. Remove factory connector from fold valve solenoid

and install Y49 to fold valve solenoid.

Installation

Settings

Most Screens include Help pages that can be accessed by pressing the ? button. These

pages contain further information about the items displayed on the current screen.

Horizon Setup

1. When entering your combine and Header information

in the Initial setup of Horizon, choose:

• Header Select = Corn

• Header App = Capello

Setup Screen

Set shaft speed alarms

• Low speed - set minimum allowed speed

• High speed - set maximum allowed speed

• “Show Shaft Speed Alarm” must be

checked to enable alarms

Show shaft speed alarm

• If box is checked you will be warned for speeds

that go outside of ranges entered

Show deck plate position

• If box is checked a notification window will appear when deck plates are adjusted

Show maintenance reminder

• If box is checked a notification window will appear when maintenance intervals are reached

Settings

Operation

Home Screen

Deck Plate Position

• DIsplays deck plate gap

Shaft Speed

• Displays header gearbox drive shaft speed

Deckplate Angle

• When the Horizon Base is mounted correctly on

the backsheet of the header, this value shows

the current deckplate angle of the header.

• Value is green if within OEM recommended range

Fold Button (Folding heads only)

• Button appears only when Horizon senses fold valve attached

• Button toggles between deck plate and fold mode

• Enable (green indictor) to allow head to be folded with Reel f/a controls on combine

• Disable to operate deckplates

• System defaults to Deckplate mode. Fold function times out.

Operation

Inhaltsverzeichnis

Andere Headsight Controller Handbücher

Headsight

Headsight TS-JD9x10 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung