HearthStone Morgan 8470 Bedienungsanleitung

©HearthStone Quality Home Heating Products, Inc.

www.hearthstonestoves.com

[email protected] Page: 1 of 3

Revised: 1/7/2008

Technical Data Sheet

Morgan 8470 Surround Assembly Instructions

ASSEMBLY CONTENTS: TOOLS REQUIRED:

2 – Assembled Side Panels Consisting Of: Phillips Screwdriver

1 - #2410-795 Surround: Molding 7/16” Wrench

1 - #2410-797 Corner Molding

2 - #5470-097 Inner Connecting Plate

5 - #4500-1876 10-24x ½” Pan, Phillips Screws

3 - #5470-049 Connector Plates

2 - #5012-066 Bushings

4 - #4500-2114 10-24x3/8” Pan, Phillips Blk Ox Screw

1 - #2410-798 Surround: Straight

1 - #2410-799 Surround: Corner

2 - #5947-020 Outer Connector Plate

5 - #3160-080 ¾” Flat Gasket Tape

3 - #4500-2106 10-24x3/8” Flat Phillips Blk Ox Screws

1 - #2410-795 Surround: Molding

1 - #2410-798 Surround: Straight

1 - #5470-025 Surround: Left Side Bracket

1 - #5470-027 Surround: Right Side Bracket

Fasteners:

All fasteners are pre-inserted.

Refer To the Surround Illustration As Needed To Complete the Assembly

©HearthStone Quality Home Heating Products, Inc.

www.hearthstonestoves.com

[email protected] Page: 2 of 3

Revised: 1/7/2008

PROCEDURE:

1. Install the left and right surround brackets onto the insert by placing them as shown in the

illustration below. Once properly oriented on the insert, turn in the ¼”-20 bolts that were

removed when the brace was taken off the pallet until they are just finger tight. By measuring

the fireplace, you should have an approximate idea of the placement of the surround bracket.

Slide the bracket into place and secure the bolt with a 7/16” wrench.

1/4-20 Hex Head

Mounting Bolt

Surround: Leveling Bracket

Surround: Bracket

2. Place the already assembled Right portion of the surround (item 1 in the illustration) face down

on a smooth, flat surface.

3. Position the top section of the surround (item 3 in the illustration) and the outer straight section

(item 4) into position as illustrated on page 3. Secure them to the top panel using the fasteners

provide (already in place) – proper placement of the screws is called out in the illustration on

page 3.

. 4. Install the left side (item 2) to the top in similar fashion.

5. Locate the four bushings on the surround (see illustration). Lift the assembled surround and

place it front of the insert. The bushings on the surround will slide into the openings on the

surround brackets previously installed onto the insert. The top bushings fit into the slots, the

bottom bushing fit into the enlarged round openings. Allow the surround to drop and seat onto

the brackets.

6. If final adjustments are necessary, lift the surround off the insert, loosen the bolts that hold the

brackets to the insert, adjust the brackets, tighten with the 7/16” wrench, and fit the surround

©HearthStone Quality Home Heating Products, Inc.

www.hearthstonestoves.com

[email protected] Page: 3 of 3

Revised: 1/7/2008

back onto the insert as described in step 5.

7. Use the leveling brackets if needed to keep the bottom edges of the surround flush to the hearth.

Install the leveling brackets by bolting them into the square cutout on the back bottom of the

surround using the 10-24x3/8” bolts provided. Turn the ¼-20 bolts down into the threaded holes

on the bottom of the leveling brackets. These bolts can now be turned to raise the surround.

Andere Handbücher für Morgan 8470

Inhaltsverzeichnis

Andere HearthStone Kamin im Innenbereich Handbücher

HearthStone

HearthStone Tucson (8700) Bedienungsanleitung

HearthStone

HearthStone CELESTE 60 Bedienungsanleitung

HearthStone

HearthStone Clydesdale II 8492 Bedienungsanleitung

HearthStone

HearthStone 8762 Bedienungsanleitung

HearthStone

HearthStone Clydesdale 8490 Bedienungsanleitung

HearthStone

HearthStone Stowe DX 8322 Bedienungsanleitung

HearthStone

HearthStone Morgan 8470 Bedienungsanleitung

HearthStone

HearthStone Morgan 8470 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

HearthStone

HearthStone DVI 44 Bedienungsanleitung

HearthStone

HearthStone 8050 Bedienungsanleitung

HearthStone

HearthStone Morgan 8470 Bedienungsanleitung

HearthStone

HearthStone hase-Bari 8180 Bedienungsanleitung

HearthStone

HearthStone Santa Fe 8761 Bedienungsanleitung

HearthStone

HearthStone AURORA 8906 Series Sicherheitsleitfaden

HearthStone

HearthStone Tudor 8120 Bedienungsanleitung

HearthStone

HearthStone Morgan 8470 Bedienungsanleitung

HearthStone

HearthStone Tucson 8702 ST Bedienungsanleitung

HearthStone

HearthStone Santa Fe Bedienungsanleitung

HearthStone

HearthStone DVI 38 Bedienungsanleitung

HearthStone

HearthStone WFP-75 Bedienungsanleitung

HearthStone

HearthStone 8323 Bedienungsanleitung

HearthStone

HearthStone 8491 Bedienungsanleitung

HearthStone

HearthStone 8890 Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch

Regency Fireplace Products

Regency Fireplace Products Pro Series Kurzanleitung