Heat Controller VMH 24 Bedienungsanleitung

Heat Controller, Inc. • 1900 Wellworth Ave. • Jackson, MI 49203 • (517)787-2100 • www.heatcontroller.com

OWNER’S MANUAL

VMH 09/12/18/24

Version C

Inverter Single Zone

Ductless Mini-Split Heat Pump

VMH Inverter Mini-Split OWNER’S MANUAL Heat Controller, Inc.

Table of Contents

Safety Precautions

Warning and Cautions .............................................................................2

Operating Instructions

Identication of Parts ...............................................................................3

Display and Remote Controller Features.................................................3

Operating Conditions and Manual Operation...........................................5

Airow Direction Control ..........................................................................6

Operation Modes .....................................................................................7

Care and Maintenance

Care and Maintenance.............................................................................8

Operation Tips

Typical Operational Occurrences ...........................................................10

Troubleshooting Tips

Troubleshooting Tips..............................................................................12

Caution

• Contact an authorized service technician for repair or maintenance of this unit.

• Contact the installer for installation of this unit.

• Installation work must be performed in accordance with local and national electrical

codes and standards by authorized personnel only.

Heat Controller, Inc. OWNER’S MANUAL VMH Inverter Mini-Split

• Do not attempt to install this air conditioner by yourself.

• This unit contains no user-serviceable parts. Always consult authorized service personnel for repairs.

• Do not insert ngers or objects into the outlet or intake grilles.

• Do not start and stop air conditioner operation by disconnecting the power supply.

• Take care not to damage the power supply wiring.

• In the event of a malfunction (burning smell, etc.), immediately stop operation, disconnect the

power supply, and consult authorized service personnel.

• Provide occasional ventilation during use.

• Do not direct air ow at replaces or heating apparatus.

• Avoid installing the air conditioner near a replace or other heating apparatus.

• Do not climb on, or place objects on, the air conditioner.

• Do not hang objects from the indoor unit.

• Do not set ower vases or water containers on top of the air conditioner.

• Do not expose the air conditioner directly to water.

• Do not operate the air conditioner with wet hands.

• Turn off power source when not using the unit for extended periods.

• Do not drink the water drained from the air conditioner.

• Connection valves become hot during Heating; handle with care.

• Do not apply any heavy pressure to evaporator ns.

• Operate only with air lters installed.

• Do not block or cover the intake or outlet grille.

• Ensure that any electronic equipment is at least 3 feet (1m) away from either the indoor or outdoor

units.

• Do not use inammable gases near the air conditioner.

CAUTION!

WARNING!

To prevent injury to the user, other people and/or to property, the following instructions must be followed. Incorrect operation

due to ignoring these instructions may cause harm or damage. The seriousness is classied by the following indications:

WARNING!

CAUTION!

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to property.

Never do this.

Always do this.

Meanings of symbols used in this manual are as shown below:

VMH Inverter Mini-Split OWNER’S MANUAL Heat Controller, Inc.



( C )

Identication of Parts

Base valve

(Heat Pump

mode.

Heat Controller, Inc. OWNER’S MANUAL VMH Inverter Mini-Split

Remote Controller Features

The remote controller comes with a FOLLOW ME feature which allows the remote controller to act as a

thermostat. This allows the unit to sense the temperature at the location of the remote controller, rather

than sensing the temperature at the indoor unit. The indoor unit is installed high on a wall, thus the ther-

mostat on the remote controller will provide a more accurate temperature reading for the room. Consult

the remote controller manual for more information.

Displayed when TURBO function is selected in

cooling or in heating modes. This air conditioner

is equipped with an ionizer, which generates

ions to remove microscopic particles from the air.

Rooms become healthier for those suffering from

asthma or allergies with the use of this feature.

DIGITAL DISPLAY

Displays the current set temperature when the air

conditioner is in operation. When SELF CLEAN

feature is activated, its displays “SC”.

TURBO operation display

Illuminated when TURBO function is selected in

cooling or heating operation.

This display is separated into ve zones.

The zones illuminate base on the com-

pressor’s current frequency. For ex-

ample, a higher frequency will illuminate

more zones.

VMH Inverter Mini-Split OWNER’S MANUAL Heat Controller, Inc.

Mode Temp Ambient Operating Conditions

Fahrenheit Celsius

Cooling Outdoor 5 to 122 -15 to 50

Indoor =62.6 =17

Heating Outdoor 5 to 93.2 -15 to 34

Indoor =86 =30

Dehumidication Outdoor 5 to 122 -5 to 50

Indoor >50 >10

See chart below for operating conditions:

Operating Conditions:

When cooling is needed year round, including when outdoor temperatures are apt to fall below freezing, our

V Series inverter driven ductless mini-split systems will continue to work, as they come with factory installed

low ambient controls. The low ambient feature works by regulating the head pressure by varying the amount of

air ow through the condenser, which helps to prevent evaporator freeze ups and low pressure problems due to

low ambient outdoor temperatures. Low ambient operation is a great feature for temperature/humidity sensitive

environments or applications such as server/computer rooms, supermarkets, restaurants, or cooling tower fans.

Additionally, a crank case heater is required and factory installed, as it is needed for use with the low ambient

controls. The crank case heater minimizes liquid refrigerant migration to the compressor when the compressor

is not operating and helps to keep the compressor oil warm enough so that it remains uid to prevent slugging.

Crank case heaters also assist to greatly reduce heat loss to ambient air. Together, the lower ambient feature

combined with the factory installed crank case heater, will not only allow the air conditioner to cool year round,

but will also prevent compressor failure in low ambient conditions.

Manual Operation:

Manual operation can be used temporarily to run the unit without using the remote controller. This feature can

also be used to test the unit during installation and troubleshooting by an authorized service technician.

NOTE: This manual does not include Remote Controller Operations, see the <<Remote Controller Manual>>

packaged with the unit for details.



( C )

NOTE: The unit must be turned off before operating the

manual control button. If the unit operational, continue press-

ing the manual control button until the unit is off.

1. Grasp both sides of the panel and pull it down. The panel

opens upward to an angle of 15°. Push the panel upward

and then lift it up.

2. One press of the manual control button will lead to the

forced AUTO operation. If the button is pressed twice

within ve seconds, the unit will operate under forced

COOL operation. Press the button a third time to stop the

manual operation.

3. Close the panel rmly to its original position.

CAUTION:

• This button is used for testing purposes only.

• To restore the remote controller to control the unit, siply

begin to operate the unit with the remote controller.

Heat Controller, Inc. OWNER’S MANUAL VMH Inverter Mini-Split

 

( C)

NOTE: The remote controller provided with your unit

may differ in appearance. Please refer to the <<Remote

Controller Manual>> supplied with the unit to operate the

unit properly.

• Adjust the air ow direction properly otherwise it might

cause discomfort or uneven room temperatures.

• Adjust the horizontal louver using the remote controller.

• Adjust the vertical louver manually.

To set the vertical (up-down) air ow direction

Perform this function while the unit is in operation. Press

the SWING button on the remote controller to move the

louver to the desired direction. The angle of the horizon-

tal louver moves 6° for each press of the button.

To set the horizontal (left-right) air ow direction

Adjust the vertical louver manually using the lever on

the left or right side of the vertical louver arm (depending

on model). Take care not to catch ngers on the fan,

horizontal louver or to damage vertical louvers. Move the

lever to the desired position to direct air ow.

• Hold the SWING button without releasing it for more than

2 seconds. The horizontal louver will swing up and down

automatically.

• To stop the function, press the SWING button again.

The swing function will be disabled when the air conditioner is not in

operation (including when the TIMER ON is set).

button

VMH Inverter Mini-Split OWNER’S MANUAL Heat Controller, Inc.

OPERATING MODES

AUTO operation

• When you set the air conditioner to AUTO mode, it will automatically select

cooling, heating (heat pump models only), or fan only operation depending

on what temperature you have selected and the actual room temperature.

• The air conditioner will control room temperature automatically around

the temperature set point you select.

• If the AUTO mode is uncomfortable, you can change desired tempera-

ture settings manually.

ECONOMY/SLEEP operation

• When you push ECONOMY button on remote controller it activates

SLEEP mode. During cooling, heating (heat pump only), or AUTO op-

eration, the air conditioner will automatically increase (cooling) or de-

crease (heating) 2°F (1°C) per hour.

• The set temperature will become steady 2 hours later.

• The SLEEP mode will turn off after 7 hours and revert back to the previ-

ous settings.

• The fan speed will be automatically controlled.

• This feature can maintain the most comfortable temperature and save

more energy during use.

DRY MODE/DEHUMIDIFYING operation:

• The temperature is regulated while dehumidifying by repeatedly turning

on and off of the cooling operation or fan only. The fan speed will be au-

tomatically controlled. In this mode, if the room temperature is lower than

50°F (10°C) the compressor will stop. The compressor will restart when

the room temperature is above 54°F (12.2°C).

Optimal Usage Tips:

To achieve optimal performance, please note the following:

• Adjust the air ow direction correctly so that it is not directed directly

blowing on people/animals.

• Adjust the temperature to achieve the highest comfort level. Do not ad-

just the unit to excessive temperature levels.

• When in COOL or HEAT modes close any open doors and windows within

the room that the unit is operating in to increase performance.

• Use TIMER ON button on the remote controller to select a time you want

to start your air conditioner.

• Do not put any objects near air inlet or air outlet, as the efciency of the

air conditioner may be reduced and the air conditioner may stop running

due to air ow blockages.

• Clean the air lter periodically, otherwise performance may be reduced.

• Do not operate unit with louvers in a closed position

• SUGGESTION: For units with an electric heater, when the outside

ambient temperature is below 32°F (0°C), we strongly recommend that

you keep the unit powered on in order to guarantee it runs smoothly.

2°F

Heat Controller, Inc. OWNER’S MANUAL VMH Inverter Mini-Split

NOTE: Supply power must be disconnected before

cleaning the indoor unit.

Do not use an overly wet cloth to clean the unit as

it may damage the electronic components. A damp

cloth can be used if needed.

Never use water hotter than 104°F (40°C) to clean the

front panel. It could cause deformation or discoloration.

Hold the handle of the air lter and lift it up slightly

to take it out from the lter holder, then pull it

downwards.

Cleaning the air lter

NOTE: Supply power must be disconnected before

cleaning the indoor unit.

VMH Inverter Mini-Split OWNER’S MANUAL Heat Controller, Inc.

CARE AND MAINTENANCE

3. Remove the AIR FILTER from the indoor unit.

• Clean the AIR FILTER once every two weeks.

• Clean the AIR FILTER with a vacuum cleaner or with water,

then dry it in a cool place

4. Remove the Air Freshening Filter (optional lters: plasma dust col-

lector/silver ion lter/bio lter/vitamin C lter) from it support frame.

The installation and removing method of the air freshening lter is

different depending on the models. See the pictures marked 1 and

2 on the left.

• Clean the air freshening lter at least once a month, and re-

place it every 4-5 months.

• Clean it with a vacuum cleaner, then dry it in a cool place.

5. Install the air freshening lter back into position.

6. Insert the upper portion of the air lter back into the unit taking care

that the left and right edges line up correctly when placing lter into

position.

Maintenance

If you do not plan on use the unit for a long period of time:

1. Clean the indoor unit and air lter.

2. Select FAN only mode, let the indoor fan run for a while to dry the

inside of the unit.

3. Disconnect the power supply and remove the batteries from the remote

controller.

4. Check components of the outdoor unit periodically. Contact a local

dealer or an authorized servicer if the unit requires servicing.

NOTE: Before you clean the air conditioner, be sure to switch the unit

off and disconnect the power supply.

When the air conditioner is to be used again:

• Use a dry cloth to wipe off the dust accumulated on rear air intake grille

in order to avoid the dust blowing out from the outdoor unit.

• Check that the wiring is not broken off or disconnected.

• Check that the air lter is installed.

• Check if the air outlet or inlet is blocked after the air conditioner has not

been used for a long time.

Inhaltsverzeichnis

Andere Heat Controller Wärmepumpe Handbücher

Heat Controller

Heat Controller VMH30SB-1 Bedienungsanleitung

Heat Controller

Heat Controller HSS Series Leitfaden

Heat Controller

Heat Controller TPR Series Leitfaden

Heat Controller

Heat Controller A-VFH24TA-1 Gebrauchsanweisung

Heat Controller

Heat Controller SMA 09 Bedienungsanleitung

Heat Controller

Heat Controller HKV Betriebsanleitung

Heat Controller

Heat Controller HBH Series Leitfaden

Heat Controller

Heat Controller H 006 Bedienungsanleitung

Heat Controller

Heat Controller HBH/V Compact Gebrauchsanweisung

Heat Controller

Heat Controller Energy Knight HMC30AS-1 Bedienungsanleitung

Heat Controller

Heat Controller TPRG Series Bedienungsanleitung

Heat Controller

Heat Controller SMA Series Bedienungsanleitung

Heat Controller

Heat Controller DMH18DB-1 Bedienungsanleitung

Heat Controller

Heat Controller HEV Series Leitfaden

Heat Controller

Heat Controller A-HMC09AS Bedienungsanleitung

Heat Controller

Heat Controller RAH-183G Bedienungsanleitung

Heat Controller

Heat Controller VMH 09 Bedienungsanleitung

Heat Controller

Heat Controller AS-W303DPZ0 Bedienungsanleitung

Heat Controller

Heat Controller HEV Series Gebrauchsanweisung

Heat Controller

Heat Controller Geothermal Bedienungsanleitung

Heat Controller

Heat Controller Energy Knight B/A-HMC30AS Bedienungsanleitung

Heat Controller

Heat Controller MMC18DA-1 Bedienungsanleitung

Heat Controller

Heat Controller VMH 09 Handbuch

Heat Controller

Heat Controller HTV Series Leitfaden

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Panasonic

Panasonic WH-SDF03E3E5 Leitfaden

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung