HEATLIE BARBECUES
9
A-0020-MAN Heatlie BBQ Instruction Manual V6 Updated Dec 2018
ASSEMBLY
PROCEDURE
Heatlie barbecues need to be kept under a weather proof cover.
Assembling the legs, lid and accessories
Instructions follow of the assembly of Heatlie BBQ accessories. Examine
only those instructions appropriate to the product/s purchased.
Remove contents of Leg Kit Box.
To secure wheels on wheel leg kit:
1. Place the wheel on the axle
2. Place 1 black nylon washer on axle
3. Pass axle through hole at the bottom of the wheel leg so the axle
thread is protruding from the inner side of the leg
4. Place the M10 (small) washer on the axle
5. Screw on the nylock nut with the nylon on the external side
6. Tighten nut to required tension using a spanner
7. Repeat the process for the other wheel
NOTE: If Warming Drawer is being used, please refer to “Assembly
of Heatlie Accessories before proceeding as this needs to be
added to the barbecue before attaching the legs.
8.1 Assembling the legs
Two people are required to assemble the legs. Thumb screws do not
need to be completely removed - DO NOT MISPLACE. Secure thumb
screws back into the Barbecue when legs have been removed.
8.1.1 Assemble the Wheel Leg Eng first. With one person standing at
the control end of the Barbecue undo the thumb screws and lift
the Barbecue. The other person inserts the Wheel Leg End.
8.1.2 Place the end of the Barbecue on the ground and repeat the
process at the other end.
8.1.3 Tighten the thumb screws on the stub legs.
8.2 Warming Drawer
If you have a mobile Barbecue:
8.2.1 Ensure the legs are not inserted into the Barbecue top.
8.2.2 Turn the Barbecue upside down and place on a smooth surface
so the Barbecue is not damaged.
8.2.3 Remove the galvanised base plate by removing the tek screws
with a spanner
8.2.4 Turn Barbecue upright and place on ground.
8.2.5 Remove the drawer from the warming drawer frame.
8.2.6 Insert the wheeled leg into the right hand side of the Warming
Drawer frame.
8.2.7 Insert the other leg in the opposite side of the Warming
Drawer frame.
8.2.8 Place the Barbecue on top of the legs and Warming Drawer,
inserting the legs into the Barbecue body.
8.2.9 Tighten thumb screws on the Barbecue.
8.2.10 Insert the drawer into the front of the Warming Drawer frame.
