Heatmiser PRT-E1 Bedienungsanleitung

Model: PRT-E

Slimline Series

2Model: PRT-E

Model: PRT-E

Slimline Series1

Table of Contents

3-4

5-6

7-8

12-13

20-23

Product Image

Table of Contents

What is a Programmable Room Thermostat?

Installation Procedure

LCD Display

Operating Mode

Setting the Clock

Temperature Display

Setting the Comfort Levels

Locking the Thermostat

Setting the Temperature

Temperature Hold

Holiday Programming

Frost Protection

Power On / O

Optional Features

Re-calibrating the Thermostat

Factory Reset

Wiring Diagram

Slimline Series Model: PRT-E

The way to set and use your programmable room thermostat is to nd the lowest

temperature settings that you are comfortable with at the dierent times you have

chosen, and then leave it alone to do its job.

The best way to do this is to set the room thermostat to a low temperature

– say 18°C , and then turn it up by 1°C each day until you are comfortable with the

temperature. You won’t have to adjust the thermostat further. Any adjustment above

this setting will waste energy and cost you more money.

You are able to temporarily adjust the heating program by overriding or using the

temperature hold feature. These features are explained further on pages 15 and 16

of this manual.

Programmable room thermostats need a free ow of air to sense the temperature,

so they must not be covered by curtains or blocked by furniture. Nearby electric

res, televisions, wall or table lamps may also prevent the thermostat from working

properly.

What is a Programmable Room Thermostat?

A programmable room thermostat is both a programmer and a room thermostat.

A programmer allows you to set “On” and “O” periods to suit your own lifestyle.

A room thermostat works by sensing the air temperature, switching on the heating when

the air temperature falls below the thermostat setting, and switching it o once this set

temperature has been reached.

So a programmable room thermostat lets you choose what times you want the heating

to be on, and what temperature it should reach while it is on. It will allow you to select

dierent temperatures in your home at dierent times of the day (and days of the week)

to meet your particular needs and preferences.

Setting a programmable room thermostat to a higher temperature will not make the

room heat up any faster. How quickly the room heats up depends on the design and size

of the oor heating system.

Similarly reducing the temperature setting does not aect how quickly the room cools

down. Setting a programmable room thermostat to a lower temperature will result in the

room being controlled at a lower temperature, and saves energy.

Slimline Series Model: PRT-E

Installation Procedure

This Slimline Series thermostat is designed to be ush mounted and requires a back

box of 35mm (minimum depth) to be sunk into the wall prior to installation.

Step 1

Carefully separate the front half of the thermostat from the back plate by placing a

small at head terminal driver into the slots on the bottom face of the thermostat.

Step 2

Place the thermostat front somewhere safe.

Terminate the thermostat as shown in the diagram on page 26 of this booklet.

Step 3

Screw the thermostat back plate securely into the back box.

Step 4

Clip the front of the thermostat back onto the thermostat back plate.

Mount the thermostat at eye level.

Read the instructions fully so you get the best from our product.

Don’t

Do not install near to a direct heat source as this will aect functionality.

Do not push hard on the LCD screen as this may cause irreparable damage.

3 4

Slimline Series Model: PRT-E

1. Room/Floor Temp - Indicates the current temperature sensor mode.

2. Day Indicator - Displays the current day.

3. Frost Icon - Displayed when the thermostat is in frost protection mode.

4. Flame Icon - Displayed when the thermostat is calling for heat, the ame icon

will ash when the optimum start function is in operation.

5. Floor Temp Limit Icon - Displayed when the oor sensor probe has reached the

temperature limit set on feature 09.

6. Temperature Hold - When a Temp Hold is active, HOLD FOR and the remaining

time period is displayed.

7. Set - Indicates when changes are being made to programs or temperature set

points.

8. Holiday Indicator - Displayed when the thermostat is in holiday mode.

9. Current Temp - Indicates the current sensor temperature.

10. Program Cycle Indicator - Displayed during programming only to show which

period is being altered.

11. Keypad Lock Indicator - Displayed when the keypad is locked.

12. Units of Temperature - Degrees Celsius or Fahrenheit.

13. Clock - Digital clock display in 24h format.

LCD Display

1 2 346

7 8 9 10 11 12

109

Slimline Series Model: PRT-E

Setting the Clock

To set the clock, follow these steps.

• With the thermostat turned ON, press the Clock key twice ..................................

• Use the Up/Down keys to set the hours ..............................................................

• Press H to conrm settings ................................................................................................

• Use the Up/Down keys to set the minutes .........................................................

• Press H to conrm settings ...............................................................................................

• Use the Up/Down keys to set the day of the week ..........................................

• Press A to conrm settings and return to main display ..........................................

Day

Hours

Minutes

Operating Mode

The thermostat has 4 main operating modes:

Select the mode that best suits your needs

Mode 00 or 02 MUST NOT be used to control electric underoor heating, Mode 01 or 03

(default) with oor sensor option must be used.

• Press and hold the Power button to turn the thermostat OFF .........................

• Press and hold the H key for 10 seconds ...................................................................

• Use the Up/Down keys to select the mode you require .............................

• Press A to conrm settings .............................................................................................

• Press the Power button once to turn the thermostat back ON .........................

MODE

Non-programmable with air sensor only.

Non-programmable with oor / air sensor options.

Programmable with air sensor only.

Programmable with oor / air sensor options (default).

DESCRIPTION

1211

Slimline Series Model: PRT-E

Comfort Levels Explained

The thermostat provides Weekday/Weekend or 7 Day Programming options.

You should consult the“Optional Features” section to select the required mode.

The thermostat is supplied with comfort levels already programmed, but these can be

changed easily. The default times and temperatures are;

08.00 - 21°C (Wake) 09.30 - 16°C (Leave) 16.30 - 22°C (Return) 23.00 - 17°C (Sleep)

If you only want to use 2 levels, you should program the unused levels to --.--

Note: For Weekday/Weekend programming, the 4 comfort levels are the same for all

weekdays but can be dierent for the weekends.

For 7 Day programming, each day can have 4 dierent comfort levels.

• To program comfort levels, press Clock once ............................................................

For 7 Day programming,

only Mon is displayed

in the day indicator eld.

For Weekday/Weekend programming,

Mon Tue Wed Thu Fri

are displayed on screen.

Temperature Display

This thermostat can be setup to use an air sensor, oor sensor or both.

The display will clearly show which sensor is being controlled by showing either:

Note: Built in air sensor only MUST NOT be used to control electric underoor heating.

Floor sensor only or built in air & oor sensor together must be used.

When the thermostat is set to use both sensors, the room temperature will be displayed.

To view the oor temperature, press and hold the key until the Floor Temp is

displayed on screen.

Room Temperature Floor Temperature

1413

Slimline Series Model: PRT-E

Locking the Thermostat

The thermostat has a keypad lock facility. To activate the lock follow these steps.

• Press and hold the A and Down keys together for 10 seconds ..........

• You will see the lock symbol appear on screen .............................................

• To unlock, repeat the steps above until the lock symbol disappears.

Note: The keypad lock indicator is only displayed when the lock is active.

Keypad Lock Indicator

• Use the Up/Down keys to enter the required WAKE time .......................

• Press H to conrm settings ..........................................................................................

• Use the Up/Down keys to enter the required WAKE temperature .......

• Press H to conrm settings ..........................................................................................

• You will now see“LEAVE” displayed on screen.

• Repeat the programming steps for each period until complete.

• For unused periods enter --.-- and the thermostat will ignore the setting.

• Press A to conrm settings and return to main display ....................................

Note:

• In 7 Day programming mode you can repeat for each day independently.

• In Weekday/Weekend programming mode you will see Sat Sun displayed on

screen and can repeat for the weekend.

• To change the programming mode please refer to pages 21-23.

Comfort Levels Continued

1615

Slimline Series Model: PRT-E

Temperature Hold

The temperature hold function allows you to manually override the current operating

program and set a dierent temperature for a desired period.

• Press H to commence temperature hold ....................................................................

• Use the Up/Down keys to enter the required Hold time..............................

• Press H to conrm settings ..............................................................................................

• Use the Up/Down keys to enter the required Hold temperature..............

• Press A to conrm settings and return to main display ........................................

You will see the Hold For indication is displayed on screen.

The time will countdown the set duration and then revert to the normal program.

To cancel temperature hold, follow the same steps but reduce the Hold time to 00:00.

Hold ON Indicator

Hold Time Remaining

Temperature Control

The Up/Down keys allow you to adjust the set temperature .......................

When you press either key, you will see the word SET and the desired

temperature will be displayed on screen.

Use the Up/Down keys to adjust the SET value ..................................................

Press A to conrm settings and return to main display .............................................

Set Temperature

Set Icon

Note: This override will be maintained until the next programmed comfort level.

1817

Slimline Series Model: PRT-E

Pressing the Power button once will place the thermostat in frost protect mode.

In this mode, the thermostat will display the frost icon and will only turn the heating

on should the room temperature drop below the set frost temperature (see page 20).

Should the heating be turned on whilst in frost mode, the ame icon will be displayed.

To cancel the frost protect mode, press the Power button once again.

Frost Protection Mode Enabled

Frost Mode

Holiday

Holiday Days

Holiday ON Indicator

Note: A holiday period does not start until 00:00 the next day. For example, if you set

a holiday period on Friday for 2 days, Saturday will be counted as the rst day and the

thermostat will revert back to the programmed schedule at 00:00 on Monday.

The holiday function reduces the set temperature in your home to the frost

protection temperature setting (see page 23).

The thermostat will maintain this temperature for the duration of the holiday and will

then automatically return to the program mode on your return.

• Press H three times (until you see the suitcase on screen) .................................

• Use the Up/Down keys to enter the number of days holiday ...................

• Press A to conrm settings and return to main display .......................................

The display will show a suitcase indicating the thermostat is in holiday mode.

To cancel, follow the same steps but reduce the Holiday duration to 00 days.

Inhaltsverzeichnis

Andere Heatmiser Thermostat Handbücher

Heatmiser

Heatmiser Touch-RF Bedienungsanleitung

Heatmiser

Heatmiser DS1 Bedienungsanleitung

Heatmiser

Heatmiser neoStat-hw V2 Bedienungsanleitung

Heatmiser

Heatmiser PRT-EWTS Bedienungsanleitung

Heatmiser

Heatmiser PRT-ETS Bedienungsanleitung

Heatmiser

Heatmiser smartstat Bedienungsanleitung

Heatmiser

Heatmiser neoAir Bedienungsanleitung

Heatmiser

Heatmiser Slimline-RF Bedienungsanleitung

Heatmiser

Heatmiser UH1-W Kurzanleitung

Heatmiser

Heatmiser PRT-EN1 Slimline Series Bedienungsanleitung

Heatmiser

Heatmiser PRT-E Bedienungsanleitung

Heatmiser

Heatmiser TM4-TS Bedienungsanleitung

Heatmiser

Heatmiser DS1-E Bedienungsanleitung

Heatmiser

Heatmiser PRT-B Bedienungsanleitung

Heatmiser

Heatmiser PRT-ETS WiFi Bedienungsanleitung

Heatmiser

Heatmiser SP OpenTherm neoHub Mini OT Bedienungsanleitung

Heatmiser

Heatmiser NetMonitor V3 Bedienungsanleitung

Heatmiser

Heatmiser TM4-TS Bedienungsanleitung

Heatmiser

Heatmiser DT Bedienungsanleitung

Heatmiser

Heatmiser neoUltra Bedienungsanleitung

Heatmiser

Heatmiser DT Bedienungsanleitung

Heatmiser

Heatmiser neo Stat-e Bedienungsanleitung

Heatmiser

Heatmiser TouchScreen Series Bedienungsanleitung

Heatmiser

Heatmiser SLIMLINE Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung