HEATSTRIP THE3200R Bedienungsanleitung

Ph: 03 9562 3455 | E: [email protected]

www.heatstrip.com.au

HEATSTRIP® Elegance With Remote & App (THE-RA)

Elegance with Remote & App Control

(THE-RA)

Product Manual

Specifications - Australia

MODEL POWER

(WATTS)

CURRENT

(AMPS)

DIMENSIONS

(mm)

WEIGHT

(Kg)

LEAD LENGTH

(mm) PLUG

THE2400RA 2400 10 1306 x 170 x 42.7 61000 YES

THE3200RA 3200 13 1710 x 170 x 42.7 91000 NO

MODEL

HEATER TYPE High intensity electric radiant overhead heater with high surface area proled

alloy

OUTPUT Refer to model code chart above

POWER 240 Volts Nominal at 50 Hertz, Single Phase

CONNECTION 3 Core Cable 2.5mm2

APPROVALS AUSTRALIA/NZ

MOUNTING HEIGHT

MINIMUM

RECOMMENDED

MAXIMUM

2.1 m

2.3 m to 2.5 m

2.7 m in a fully enclosed outdoor area (For higher

ceiling heights, units can be lowered using oponal

bracket kits or refer to the HEATSTRIP Max range)

MOUNTING OPTIONS

Suitable for ceiling, wall, beam, xed umbrella and recess mounng. Also

available for extension mount using rigid xing poles and chains / wire

suspension.

PROTECTION RATING IP55 Protecon from water ingress from all direcons

MATERIALS OF CONSTRUCTION High temperature coated aluminium alloy

THE1800R

THE2400RA

42.7

THE3200RA

42.7

March 2023 Revision 2

Operang cost comparison

In many instances, pao heaters powered by gas boles are used as an outdoor heang source. The below table shows

the operaonal cost comparison between HEATSTRIP® and a boled gas outdoor heater. Not only are the hourly running

costs considerably less with HEATSTRIP®, but you never have to worry about running out of gas, no relling, no unarac-

ve gas bole to waste space; and HEATSTRIP® actually improves the value of your property.

Notes:

1. Calculaons of hourly running cost for outdoor gas heater is based

on $25.00 average to ll a 9kg gas bole and average running me

of 9 hours. $25.00 / 9 hours = $2.78 per hour

2. Electricity rate of 25.0 cents/kWh

3. All calculaons are excluding GST.

1.8kW x 0.25 cents = $0.45 or 45 cents per hour

2.4kW x 0.25 cents = $0.60 or 60 cents per hour

3.2kW x 0.25 cents = $0.80 or 90 cents per hour

Calculaons of yearly running cost are based on 180 hours usage

180 hours x $2.78 = $500.40 yearly running cost for outdoor gas heater

180 hours x $0.60 = $108.00 yearly running cost for 2400W HEATSTRIP Elegance

180 hours x $0.80 cents = $144.00 yearly running cost for 3200W HEATSTRIP Elegance

RUNNING

COST

OUTDOOR GAS

HEATER

HEATSTRIP ELEGANCE ELECTRIC RADI-

ANT HEATER

THE2400R THE3200R

PER HOUR $2.78/hr $0.60/hr $0.80/hr

PER YEAR $500.40 $108.00 $162.00

Spot heang principle

In most outdoor or dicult-to-heat indoor applicaons, there are 2 opons when calculang the size and quanty of the

heaters required.

Opon 1 is to comfort heat the enre area based on the total dimensions of the space, regardless of whether the enre

area is being fully occupied.

Opon 2 is to spot heat the high use areas, such as over outdoor tables, BBQ’s, lounges, assembly lines or indoor work-

staons.

Oen it is more praccal and ecient to spot heat high use areas. Spot heang will reduce both the inial capital cost as

well as the ongoing running costs. Spot heang will allow the area to be “zoned”, meaning only the areas that are being

used are heated, such as tables in a restaurant or outdoor alfresco area.

Opon 1 and 2 show a comparison between heang an enre area or spot heang over a table.

The boom layout shows the exibility of using HEATSTRIP® to provide a comfortable environment, even when the layout

of the area is very unusual.

Opon 1: 6 x THE2400RA

Option 2: 2

Opon 2: 2x THE3200RA

BBQ BAR

BAR STORES

DINING TABLE

LOUNGE

Radiant footprint

HEATSTRIP® electric heaters produce radiant heat which heats objects rather than the air. Therefore, it is imperave that objects to be

heated (ie. people), are within the direct radiant

footprint of the heater.

The diagram to the right shows the radiant footprint of

HEATSTRIP® Elegance with Remote and App control and

is an approximate guide based on a fully enclosed

outdoor environment.

This diagram shows that the maximum heat output is

found directly under the heater, and the temperature

decreases as you move away from the heater.

It highlights the importance of maintaining

recommended mounng heights, and if possible,

posioning the heater directly above the area to be

heated.

Note that the temperature is similar for all 3 models,

regardless of the waage however, as the size increases

and the length of the unit increases, the radiant

footprint will be longer.

The below diagrams show the approximate heang area for each model, based on both an indoor and outdoor enclosed environment,

with direct overhead mounng. The radiant footprint is reduced in angled and wall mounted installaons.

THE2400RA THE320

THE2400RA THE3200RA

3500

2700

Selecon guide

General recommendaons for HEATSTRIP® Elegance with Remote and App Control:

• Ideal mounng height: 2.3m to 2.5m. Maximum is 2.7m in a fully protected/enclosed outdoor environment.

• Ideal mounng locaon: ceiling mounted, directly above area to be heated (eg. above a table)

• Minimum recommended heang capacity for various installaons are: 400W/m2 for indoor spot heang; 500W/m2 for pro-

tected outdoor areas, and 600W/m2 for exposed outdoor areas. To ensure the HEATSTRIP® Elegance provides sasfactory

performance, Thermolm strongly recommends using conservave coverage areas when specifying how many heaters are

required for each installaon.

The table below outlines the maximum coverage of each HEATSTRIP® Elegance with Remote and App control model based on 2

dierent scenarios with direct overhead mounng at minimum installaon height. For example, for an outdoor area that is protected

from prevailing winds by walls, café blinds etc, Model THE2400R will cover a maximum of 4.8m2 and Model THE3200R will cover a

maximum of 6.4m2.

For angled wall mounng applicaons, the coverage is reduced by up to 40%.

MODEL INDOOR PROTECTED (m2)OUTDOOR ENCLOSED (m2)OUTDOOR EXPOSED (m2)

THE2400RA 64.8 4

THE3200RA 86.4 5.3

Table layout

For the majority of outdoor applicaons, the most eecve method is to spot heat a table or similar

area. The diagrams below provide an easy selecon guide for the approximate model and quanty

of heaters required to heat common residenal table sengs.

Selecons are based on HEATSTRIP® Elegance with Remote and App Control being mounted at 2.4m

from the oor in a fully enclosed undercover outdoor area.

THE2400RA THE2400RA

THE2400RA THE3200RA

THE2400RA 2x THE2400RA

2x THE2400RA

4 x THE3200RA

2x THE3200RA

2 x THE3200RA

Installation Requirements

The ideal mounng posion for the HEATSTRIP® Elegance with Remote and App control is on the ceiling

directly above the area to be heated. If this is not possible, HEATSTRIP® can be mounted on a wall and angled

downwards. In this situaon, ensure the mounng height is in the range of 2.1m to 2.7m and the table is

close to the wall.

For mounng heights more than 2.7m, we recommend the use of the oponal accessories to reduce the

height of the heater to 2.3m—2.5 m. This will increase the eecveness of your HEATSTRIP®. Refer to the

Mounng Accessory secon for more informaon.

Electrical connecons/GPO’s should not be located at the back of the heater. They should be located outside

the physical footprint of the units to minimize heat build-up behind the units.

If the heater is to be mounted on an incline (e.g. vaulted ceiling), ensure the electrical connecon is located

at the lowest point of the heater.

Incorrect Installation Correct Installation

The heating surface must never be directed toward the ceiling

Installation location —the diagrams below provide the minimum recommended clearances in (mm).

WARNING: This heater is not equipped with a device to control the room temperature. Do not use this

heater in small rooms when they are occupied by persons not capable of leaving the room on their own,

unless constant supervision is provided.

Angled

Ceiling

Installation

Ceiling

Installation

Angled

Wall

Installation

LIGHT, FAN OR SPRINKLER

MUST NOT BE BELOW HEATER

LIGHT, FAN OR SPRINKLER

MUST NOT BE BELOW HEATER

LIGHT, FAN OR SPRINKLER

MUST NOT BE BELOW HEATER

SURFACE

BELOW

HEATER

SURFACE

BELOW

HEATER

SURFACE

BELOW

HEATER

STANDARD

BRACKET

STANDARD

BRACKET

CEILING

FLUSH

MOUNT

ENCLOUSURE

STANDARD

BRACKET

POLE / BEAM

MOUNTING

Mounng opons

Installing the HEATSTRIP® Elegance with Remote and App Control is simple and easy using the standard mounng brackets

supplied. For other irregular locaons there are range of mounng opons available - refer to diagrams below

The HEATSTRIP® Elegance with Remote and App Control can be mounted directly to the ceiling, angled downwards on a wall,

ed ush with the ceiling, aached to beams or poles or suspended by rods, wires or chain .

CHAIN / WIRE

MOUNTING

EXTENSION

MOUNTING

BRACKET

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HEATSTRIP Heizung Handbücher

HEATSTRIP

HEATSTRIP Classic THH-A Series Bedienungsanleitung

HEATSTRIP

HEATSTRIP THH1500 Gebrauchsanweisung

HEATSTRIP

HEATSTRIP THE1800 Bedienungsanleitung

HEATSTRIP

HEATSTRIP Design THH Series Bedienungsanleitung

HEATSTRIP

HEATSTRIP TG2200RB Bedienungsanleitung

HEATSTRIP

HEATSTRIP Classic THH1500AUL Bedienungsanleitung

HEATSTRIP

HEATSTRIP THH1500AEU Bedienungsanleitung

HEATSTRIP

HEATSTRIP THX 2400 Bedienungsanleitung

HEATSTRIP

HEATSTRIP THH 1500 Gebrauchsanweisung

HEATSTRIP

HEATSTRIP Elegance THE1800EU Bedienungsanleitung

HEATSTRIP

HEATSTRIP THH1800AP Bedienungsanleitung

HEATSTRIP

HEATSTRIP TT2200RW Bedienungsanleitung

HEATSTRIP

HEATSTRIP THX2400UK Bedienungsanleitung

HEATSTRIP

HEATSTRIP Indoor THS-A Bedienungsanleitung

HEATSTRIP

HEATSTRIP TF2200RW Bedienungsanleitung

HEATSTRIP

HEATSTRIP THX 2400 Bedienungsanleitung

HEATSTRIP

HEATSTRIP Classic Bedienungsanleitung

HEATSTRIP

HEATSTRIP THE 1800 Bedienungsanleitung

HEATSTRIP

HEATSTRIP THX 2400 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung

iLO

iLO IHP2424 Betriebsanleitung