HEATSTRIP THX 2400 Bedienungsanleitung

OPERATION, INSTALLATION AND MAINTENANCE MANUAL

H EAT ST RI P ® Max

The heater that is a design fea ture!

Product Overview Rev G MAR16

Why choose Heatstrip® electric radiant heaters for your outdoor or hard-to-heat indoor area?

As there is typically constant air movement in an outdoor or open indoor area, many conventional patio heaters rely on

convection heating which works by heating the surrounding air. This can be quite impractical for these areas, as this

heated air can easily blow away with natural air movement. Radiant style heaters transfer heat directly to objects through

infra-red waves.

Whilst convection heaters heat the air in between objects, radiant heaters heat the surface of the objects themselves.

HEATSTRIP® electric radiant heaters are more effective within an outdoor or uninsulated indoor area because they

provide targeted warmth directly to the people and objects in their path.

Discrete, stylish heating for undercover outdoor and indoor open areas

Using the radiant heating principle, HEATSTRIP® can provide effective and energy efficient comfort heating for undercover

outdoor and indoor open areas. HEATSTRIP® has successfully enabled many entertainment venues such as restaurants,

pubs and clubs to utilise their outdoor dining areas day and night, through all seasons. Within your workplace or business,

HEATSTRIP® can provide comfort heating for designated outdoor smoking and leisure areas, as well as for workstation

spot heating in factories, warehouses and showrooms. Within your home, HEATSTRIP® can provide comfort heating for

undercover alfresco dining and BBQ area, patios, verandas, courtyards and balconies.

APPLICATION THS THH THX

Indoor insulated areas, classrooms, offices, bathrooms, wet areas, drying rooms √√X

Outdoor under cover, café, veranda, patio, balcony ceiling height 3m or less X√X

Outdoor under cover, café, veranda, patio, balcony ceiling height 3m or more XX√

Highly exposed outdoor area XX√

Indoor open area, warehouse, factory, production areas, sports facilities √√√

Indoor spot heating, above tables, assembly areas X√√

There are 3 different series of products within the Heatstrip® product category. Each has a different temperature output,

making them ideal for different applications. Below is a list of some common applications, to assist with the selection of the

most effective and efficient series. This is a general guide only, please refer to the Product Manual for each product, for

more information.

HEATSTRIP® Classic (THH models) is a premium high temperature heater and is primarily used for outdoor rooms

where there is 1,2 3, or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m.

HEATSTRIP® Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a

mounting height of 2.4 m to 3.5m.

HEATSTRIP® Indoor (THS models) is a medium intensity heater used for protected indoor applications.

Innovative, High Performance Electric Heating Technology

Features & Benefits

High Output radiant heat

The Heatstrip Max range of electric radiant heaters produces a high temperature radiant warmth that travels through the

air directly to people and surfaces below – similar to the heat rays emited by the Sun. Radiant heating is the only viable

option for outdoor or tough indoor sites.

Unique low-glow heating technology

Specially designed and engineered "low-glow" heating element provides a very gentle and unobtrusive glow. There no

blinding light, like other infra-red heaters, so you can enjoy the experience. Energy is directed towards producing heat,

rather than an annoying light.

Maximum heat performance – multiple applications

The high temperature output of the Heatstrip Max is perfect for exposed outdoor sites, high ceilings and hard-to-heat

indoor and outdoor applications.

The dual element design allows for a very compact unit, and maximum efficiency. Outdoor applications include al-fresco

and dining/entertainment areas, patios, veranda's and balconies, to name a few. Indoor applications such as factories,

warehouses, showrooms, workshops and workstation spot heating are ideal for the Heatstrip Max.

Suitable for permanent outdoor mounting, no protection needed.

For outdoor applications, the Heatstrip Max is suitable for both permanently exposed (eg. courtyards and patios) and

undercover installations - does not need to be fully protected from the elements.

High Strength element – virtually indestructible

The unique metallic “Incoloy” element is 14mm thick, meaning it is vandal proof and will not shatter like other glass quartz

heating elements. Provides piece of mind in both commercial and domestic situations.

Commercial grade quality – 2 years full replacement warranty

Constructed of extremely robust, commercial grade material, the Heatstrip Max is designed for long-life and durability in all

conditions. It is fully supported by a 2 year replacement warranty under both residential and commercial conditions.

Corrosion protection

Built from corrosion resistant alloy, it is suitable for use in most applications, including difficult corrosive environments such

as coastal areas.

Multi-Purpose Mounting Options

The Heatstrip Max is supplied with flexible mounting options. The standard bracket will allow both ceiling and wall

mounting, at various angles, as well as suspension by chains/wires and metal rods. Optional twin mount and end-to-end

brackets are also available.

2 models – DIY or hard-wired

2 models are available. The THX 2400 (2400W) is supplied with a lead and plug, therefore ideal for a DIY installations.

The THX 3600 (3600W) requires hard-wiring to a 15amp power supply.

Australian designed, engineered and assembled

Specifications - Australia

MODEL POWER

(WATTS)

CURRENT

(AMPS)

DIMENSIONS

(mm)

WEIGHT

(Kg)

LEAD

LENGTH

(mm)

PLUG

THX2400 2400 10 854 x 170 x 80 51000 YES

THX3600 3600 15 1184 x 170 x 80 61000 NO

MODEL

HEATER TYPE High intensity electric radiant overhead heater with Incoloy 840 element

OUTPUT Refer to model code chart above

POWER 230-240 Volts Nominal at 50—60 Hertz, Single Phase

CONNECTION 3 Core Cable 2.5mm2

APPROVALS AUSTRALIA/NZ

MOUNTING HEIGHT MINIMUM

RECOMMENDED

MAXIMUM

2.1 m

2.4 m to 3.0 m

3.5 m (For higher ceiling heights, units can be

lowered using optional bracket kits or refer to the

Heatstrip Max range)

MOUNTING OPTIONS Suitable for ceiling, wall, beam mounting. Also available for extension

mount using rigid fixing poles and chain mount bracket.

PROTECTION RATING IPX5 Protection from water ingress from all directions

COUNTRY OF MANUFACTURE Australia

170

854

1180

170

BAR

BAR STOOLS

DINING TABLE

LOUNGE

BBQ

Spot heating principle

In most outdoor or difficult-to-heat indoor applications, therefore are 2 options when looking at the size and quan-

tity of the heater required. Option 1 is to comfort heat the entire area based on the total dimensions of the space,

regarding of whether the entire area is being fully occupied. Option 2 is to spot heat the high use areas, such as

over outdoor tables, BBQ’s, lounges, assembly lines or indoor workstation.

Often it is more practical and efficient to spot heat these areas. Spot heating will help to reduce the initial capital

cost, as well as the running costs. Spot heating will allow the area to be “zoned”, meaning heating only the areas

that are being used, such as tables in a restaurant or outdoor alfresco area.

The top table shows how HEATSTRIP® Max can be used over a table.

The bottom table shows the flexibility of using HEATSTRIP® to provide a comfortable environment, even when

the layout of the area is very unusual.

THX2400 THX3600

Radiant footprint

HEATSTRIP® electric heater produce radiant heat, which heats objects rather than the air. Therefore, it is imperative that

objects to be heated (ie. People), are within the direct radiant footprint of the heater.

The diagram below shows the radiant footprint of HEATSTRIP® Max, and is an approximate guide based on a fully

enclosed, outdoor environment.

This diagram shows that the maximum heat output is found directly under the heater, and the temperature decreases as

you move away from the heater.

It highlights the importance of maintaining recommended mounting heights, and positioning the heater directly above the

area to be heated, if possible.

Also, the temperature (ie. surface temperature) is the same for both models, regardless of the wattage. However, the size

increases and the length of the unit increases, the radiant footprint will be larger.

25°C

21°C

800mm STANDING HEIGHT

1170mm SITTING HEIGHT

2400mm MAXIMUM HEIGHT

23°C

1500

800mm STANDING HEIGHT

1170mm SITTING HEIGHT

2400

1500

25°C 21°C

66°

23°C

2600

3800

4400

THX RADIANT CROSS SECTIONAL AREA

3000

3500mm MAXIMUM HEIGHT

AUSTRALIA OPERATING MANUAL

Selection guide

Prior to selecting the exact model and quantity required for your application, please ensure the correct range of Heatstrip

heaters is being used.

Below is an overview of the Heatstrip options.

HEATSTRIP® Classic (THH models) is a premium high temperature heater and is primarily used for outdoor rooms

where there is 1,2 3 or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m. Ideal for hard to heat indoor ap-

plications or moist environments where an IP55 rating is required.

HEATSTRIP® Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a

mounting height of 2.4 m to 3.5m. Also suitable for difficult indoor environments such as showrooms, production lines,

warehouses etc.

HEATSTRIP® Indoor (THS models) is a medium intensity heater used for protected indoor applications, such as

sunrooms, school classrooms, halls, gymnasiums etc.

General recommendations for HEATSTRIP® Max:

 Ideal mounting height: 2.4m to 3.5m. Maximum is 3.5m in a protected outdoor environment.

 Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table)

 Based on the radiant footprint of the previous page, for a protected outdoor area, a minimum of 250W/m2 is re-

quired. For indoor spot heating, a minimum heating capacity of 150W/m2 is recommended.

The below table outlines the coverage of each HEATSTRIP® Max model (in m2), based on 3 different scenarios.

For example, for an outdoor area that is protected from prevailing winds by walls, café blinds etc, Model THX2400 will

cover 9.5m2 and Model THX3600 will cover 14.5m2.

MODEL INDOOR PROTECTED (m2) OUTDOOR ENCLOSED (m2) OUTDOOR EXPOSED (m2)

THX2400 16 9.5 6

THX3600 24 14.5 9

Installation Requirements

The ideal mounting position for the HEATSTRIP®. Max is on the ceiling, directly above the area to be heated. If this is not

possible, HEATSTRIP®. Max can be mounted on a wall and angled downwards. In this situation, ensure the mounting

height is in the range of 2.4m to 3.0m and the table is within 3.0m of the wall.

For mounting heights more than 3.5m, we recommend the use of the optional accessories to reduce the height of the

heater to 2.4m-3.5 m. This will increase the effectiveness of your HEATSTRIP®. Refer to the Mounting Accessory section

for more information.

Electrical connections/GPO’s should not be located at the back of the heater. They should be located outside the physical

footprint of the units to minimize heat build-up behind the units.

Incorrect Installation Correct Installation

The heating surface must never be directed toward the ceiling

CEILING

LIGHT OR SPRINKLER MUST

NOT BE BELOW THE HEATER

CEILING

FLOOR

SURFACE BELOW HEATER

150mm MIN.

300mm MIN.

1000mm MIN.

150mm MIN.

2100mm MIN.

LIGHT OR SPRINKLER MUST

NOT BE BELOW THE HEATER

CEILING

FLOOR

SURFACE BELOW HEATER

300mm MIN.

150mm MIN.

2100mm MIN.

1000mm MIN.

Angled Ceiling Installation

Ceiling Installation

150mm MIN.

300mm MIN.

LIGHT OR SPRINKLER MUST

NOT BE BELOW THE HEATER

CEILING

FLOOR

SURFACE BELOW HEATER

1000mm MIN.

2100mm MIN.

Installation location —the below diagrams confirm the minimum recommended clearances.

Angled Wall Installation

Mounting options

The installation of HEATSTRIP® Max is simple and easy with the standard mounting brackets supplied. For other more

challenging locations there are a range of mounting options available - refer to below diagrams.

The HEATSTRIP® Max can be mounted directly to the ceiling, angled downwards on a wall, suspended on chains or

poles; attached to beams or poles; or 2 units together. Refer to the following pages for more detailed information on each

mounting option.

CEILING

TWIN MOUNT

BRACKET

STANDARD

BRACKET

EXTENSION MOUNT

BRACKET

SUSPENSION MOUNT USING

STANDARD BRACKET

BEAM MOUNT USING

STANDARD BRACKET

LIGHT OR SPRINKLER MUST

NOT BE BELOW THE HEATER

CEILING

FLOOR

SURFACE BELOW HEATER

150mm MIN.

300mm MIN.

1000mm MIN.

2100mm MIN.

STANDARD MOUNTING BRACKETS

INCLUDED IN BOX

BEAM MOUNT

WITH STANDARD BRACKET

END TO END MOUNTING BRACKET

SUSPENSION MOUNTING

WITH STANDARD BRACKET

EXTENSION MOUNT KIT WITH POLES

TWIN MOUNTING BRACKETS

CEILING MOUNTING

BEAM MOUNTING

SUSPENSION MOUNTING

WALL MOUNTING

100

170

FLUSH MOUNT

ENCLOSURE

FLUSH MOUNT ENCLOSURE

CEILING

TWIN MOUNT

BRACKET

STANDARD

BRACKET

EXTENSION MOUNT

BRACKET

SUSPENSION MOUNT USING

STANDARD BRACKET

BEAM MOUNT USING

STANDARD BRACKET

FLUSH MOUNT

ENCLOSURE

Andere Handbücher für THX 2400

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HEATSTRIP Heizung Handbücher

HEATSTRIP

HEATSTRIP THH 1500 Gebrauchsanweisung

HEATSTRIP

HEATSTRIP Design THH Series Bedienungsanleitung

HEATSTRIP

HEATSTRIP TT2200RW Bedienungsanleitung

HEATSTRIP

HEATSTRIP Classic THH1500AUL Bedienungsanleitung

HEATSTRIP

HEATSTRIP THE1800 Bedienungsanleitung

HEATSTRIP

HEATSTRIP THH1800AP Bedienungsanleitung

HEATSTRIP

HEATSTRIP THX2400UK Bedienungsanleitung

HEATSTRIP

HEATSTRIP Classic THH-A Series Bedienungsanleitung

HEATSTRIP

HEATSTRIP Indoor THS-A Bedienungsanleitung

HEATSTRIP

HEATSTRIP THX 2400 Bedienungsanleitung

HEATSTRIP

HEATSTRIP THX 2400 Bedienungsanleitung

HEATSTRIP

HEATSTRIP THE3200R Bedienungsanleitung

HEATSTRIP

HEATSTRIP Classic Bedienungsanleitung

HEATSTRIP

HEATSTRIP THH1500 Gebrauchsanweisung

HEATSTRIP

HEATSTRIP TG2200RB Bedienungsanleitung

HEATSTRIP

HEATSTRIP TF2200RW Bedienungsanleitung

HEATSTRIP

HEATSTRIP Elegance THE1800EU Bedienungsanleitung

HEATSTRIP

HEATSTRIP THH1500AEU Bedienungsanleitung

HEATSTRIP

HEATSTRIP THE 1800 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung