Hebb ElectroGlide Bedienungsanleitung
Hebb E-Bikes
4114 Pinecreek Dr.
Tyler, TX 75707 USA
www.hebbebikes.com
ph. (888) 454-4322 or (903)521-2543
WARNING: Wear a helmet and safety equipment.
An unprotected head is highly susceptible to
injury, even from the slightest contact, but wearing
a helmet that meets CPSC or CE safety testing
standards may help prevent injury.
HEBB E-BIKES
ElectroGlide
ElectroCruiser
OWNER’S MANUAL
Contents
Thank You ..................................................................................................................... 2
Warranty..........................................................................................................................3
Regulations and Technical data .....................................................................................4
Parts Identication .........................................................................................................5
Unpacking ..................................................................................................................... 6
Battery Charging and Care ............................................................................................7
Assembly.......................................................................................................................,.9
Using your Hebb Electric Bike ......................................................................................14
Maintenance .................................................................................................................18
Troubleshooting.............................................................................................................19
Contact us.....................................................................................................................20
Thank You
Congratulations on the purchase of your Hebb Electric bike. You’re one step closer
in realizing a whole new way of commuting that is fast, fun and friendly to the
environment.
The hub motor is brushless and uses a technology called Pulse Wave Modulation
control, so that it’s not subject to wear like a regular DC motor. Planetary reduction gears
incorporated into its hub gives it a very strong torque, working in unison with your leg
power to atten out those hills and to overcome headwinds.
Under normal cruising conditions (16 mph), the motor draws about 5 amps at 140 watts
with 3 foot pounds torque and has an efciency of about 80%. Its electric consumption is
about 1.0 kwH for 62 miles - even less energy than the food you would consume riding
by leg power alone. Making it by far the most efcient vehicle ever made.
While the Hebb pledge to quality means our components are high value and reliable, it’s
your part to understand safety implications and the possible risks of cycling. So please
take some time and read this manual. It explains the bike in detail and how to take care
of it, so that you can enjoy using the bike for many years to come.
Bill Hebb
Hebb Electric
2
Warranty
How the warranty applies
As the makers, we warranty against possible material or construction defects,
provided the following conditions are satised :
• Proof of purchase. The warranty starts on the date of purchase.
• Only the rst owner is entitled to the warranty.
• 2 years for the frame, fork, all mechanical and electrical parts, except normal wear
and tear items.
• 2 years for the battery up to 70% depth of discharge from its original rated
capacity. This can be veried by the dealer where the bike was purchased.
How the warranty does not apply
• When the bicycle is used negligently or has damage resulting from a trafc
accident.
• Normal wear and tear.
• Poor maintenance or modications that no longer comply with regulations or
original specications.
• Damage due to external causes.
• The bicycle is used for rental.
• The battery pack is used incorrectly or damaged. This also applies to improper
charging.
• Compensatory costs arising from damages or accidents, or cost incurred by loss
of the bicycle’s usage.
How the warranty works
• Original defective parts that are sent or returned to the dealer for assessment
will be replaced by the same or equal value part.
• Labor and transportation charges are not included.
3
USA regulations allow a power assisted maximum speed of 20 mph. Hebb E-Bikes
made for the USA have a motor speed of 250 rpm for a 20 mph top speed and a
maximum rated power of 700 watts. The power assist utilizing a throttle can function
without the aid of pedaling, however there’s nothing to stop you from doing so.
Pedaling will greatly increase the mileage you get from your battery.
Typically, this means you do not require a license or moped certicate, there is no
age limit ( although we recommend riders be 18 years of age and older) and you can
take cycling paths. It conforms to regulations of normal bicycles. Legal requirements
concerning insurance and other regulations of your bicycle may differ in certain
municipalities and states, so be sure to check the regulations where you live.
Weight 59 – 63 pounds (Depends on model and size)
Motor 350W electric brushless motor with planetary reduction gears
Battery Pack Lithium polymer with battery management circuit
37V 10 Ah; weight 7 pounds
Optional battery is 37V 14Ah; weight 9 pounds
Low voltage protection 28V. Discharge temperature limit 5F to 130F.
Controller PWM, LED self-diagnostic system
Overload protection 20 amps
Charger 3 – 4 Amps Smart Charger (Depends on model)
Maximum charge time – 3 hours
Charging temperature 41F to 95F
Interface E-Bike throttle with safety ON/OFF switch
Fuse 30 amps
Regulations
and
Technical Data
4
Parts Identifcation
Parts Identifcation
1
2
3
4
5
6
7
8
9
21 20 19 18 17 16 15 14 13 12 11 10
25
24
23
22
26 27 28 29 30 31 32 33 34 35 36 37
Sprint
1 Brake cables
2 Front LED lighting
3 Mudguards
4 V-Brakes
5 Rims
6 Spokes (13g)
7 Hub motor
8 Reectors
9 Tyres 26” x 1.95”
10 Suspension front fork
11 Motor wire casing
12 Bearing race
13 Frame
14 Pedals
15 Chainwheel 48T and crank
16 Pedal sensor
17 Central support stand
18 Chain 1/2 x 3/32
19 Chain stay
20 Chainguard
21 Shimano roller brakes
22 Shimano Nexus Internal gears
23 Tensioning bolt and plate
24 Rear LED lighting
25 Al. luggage rack
26 Controller / Ignition
27 Battery
28 Saddle ip catch
29 Saddle
30 Seat post
31 Seat post clamp (quick x)
32 Headstem
33 Handle grip (Throttle)
34 Brake levers
35 Gear shifter
36 Battery level gauge
37 Handlebars
8
HEBB
1 Brake cables
2 Front LED light
3 Fenders
4 Disc Brakes
5 Rims
6 Spokes (13g)
7 Hub motor
8 Reectors
9 Tires 26” x 1.95”
10 Suspension front fork
11 Motor wire casing
12 Bearing race
13 Frame
14 Pedals
15 Chain wheel 48T and crank
17 Central support stand
18 Chain 1/2 x 3/32
19 Chain stay
20 Chain guard
21 Shimano roller brakes
22 Shimano Nexus Internal gears
23 Tensioning bolt and plate
24 Rear LED Light
25 Luggage rack
26 Controller / Ignition
27 Battery
28 Saddle ip catch
29 Saddle
30 Seat post
31 Seat post clamp (quick x)
32 Head stem
33 Handle grip (Throttle)
34 Brake levers
35 Gear shifter
36 Battery level gauge
37 Handlebars
5
Unpacking
Assembly
If you have received your bike via a freight carrier instead of picking it up from your
local bike dealer, please read this section before starting to assemble your bike.
Unpacking: Carefully remove the bicycle by lifting it straight out of the box - this will
require two people. Be careful not to scratch yourself or the bike on the carton staples.
Remove the packing material around the bike and stand the bike on a clean at
surface. Be sure to keep any small part packages that come with the bike.
In addition to the bicycle, you will receive:
• An accessory box containing the following:
1 - Pair of pedals
1 - Battery charger and cord
2 - 30 Amp fuses
4 - Hex keys - 2mm, 4mm, 5mm, 6 mm
1 - Hebb owner’s manual
1 - Shimano gear and brakes manual
1 - Cateye digital computer manual
1 - Tektro disk brake manual
Various nylon ties and heat shrink tubes
• 1 Lithium Polymer Battery - 37V, 10Ah (Upgrade Option 37V. 14Ah)
6
Battery Care
7
There are two possible chargers for your battery. Please refer to the proper
instructions for your particular charger.
CHARGER WITH ON/OFF SWITCH AND 2 LIGHTS
1. Be sure the charger is OFF.
2. Connect the charger to the AC outlet.
3. Connect the charger to the battery.
4. Turn ON the charger.
5. The red light on the charger will come on indicating there is power. The second light
will be AMBER or GREEN. AMBER means the battery is charging. GREEN means
the battery has fully charged.
Sometimes after temporary disconnection, the charging status light may give a false
green reading. To verify that your battery is fully charged, switch the charger off, wait
for the charger lights to go out and switch it back on again. The charging status light
should quickly return from amber to green when the battery is fully charged.
CHARGER WITH NO SWITCH AND ONE LIGHT
1. Connect the charger to the AC outlet. The light will be RED.
2. Connect the charger to the battery. The light will change to YELLOW.
3. When the charge is complete the LED light will change to GREEN.
CARING FOR YOUR BATTERY – VERY IMPORTANT INSTRUCTIONS
1. It will take a maximum of 4 hours to fully charge your battery. You may interrupt the
charging at any time.
2. As Li Ion batteries do not suffer from memory effect, it is not required for the battery
to be empty to begin a charge. Top-up charging every time you’ve completed your
cycle ride is recommended. Kept in good condition, a Lithium Polymer battery
will perform at least 350 full charge cycles, with retention of 70% from its original
capacity.
3. A new battery might take 2 - 3 charges before it performs at its full capacity.
8
4. The battery may be also charged on the bicycle, do make sure that the bicycle is
switched off. Do not charge the battery in wet conditions.
5. If the battery refuses to accept a charge, refer your Hebb dealer or call 888-454-
4322 for more information and technical assistance.
6. Although there is no danger of over-charging, we advise that you disconnect the
battery and switch the charger off when the charging process is completed.
7. Although batteries can be stored on the bike in the garage or a good weather-
enclosed storage area, it is recommended that the batteries not be stored for
extended periods of time at a temperature of over 80F or below freezing.
8. If the bike is not being used, we recommend the batteries be charged for an hour
or so once a month. This will keep the battery from being fully discharged and will
extend the life of the battery. Leaving the battery in a discharged state for long
periods of time will cause permanent damage.
USING THE BATTERY – EXENDING THE LIFE OF YOUR BATTERY
1. Assist the bike as much as possible, especially on steep hills. If the battery level
gauge light goes into RED for extended periods of time on steep hills, this may
damage the battery.
2. Try to avoid fully discharging the battery. It may be possible after the battery is
discharged to turn off the bike, wait a few seconds, and turn it back on to get some
more power. This pulsing (turning off and on) will permanently damage the battery.
3. The battery can be used in about any weather from 32F to 100F. Extreme heat or
extreme cold somewhat reduce the battery range.
4. Charge the battery after every use; however, after a long ride you should let
the battery cool for about an hour before it is charged. There is no “memory”
problem as there is on some batteries on power tools. The battery can be charged
at any level.
Battery Care
9
Assembly
Tools Required: You receive with your bike four (4) hex wrenches, 2mm, 4mm, 5mm,
and 6mm. You will also need an adjustable wrench and a slotted head screwdriver.
1. Pedals are marked “L” and “R” for left and right respectively. Screw in clockwise for
the “R” pedal and counter-clockwise for “L”. Tighten both with a wrench rmly but not
excessively as the crank threads are made of aluminum alloy.
2. Align the handlebar assembly perpendicular to the front fork. Tighten using the 6mm
wrench.
3. Turn the handlebar to the desired angle and tighten using the 4mm wrench.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
