Hegel H120 Bedienungsanleitung
H120 User Manual
2
3
A word from Bent 5
What’s in the box 6
Quickstart 7
General Use 10
Connections 11
Remote Control 12
Network Configuration 13
Using AirPlay 14
Using Spotify 15
Software Updates 16
Special Functions 17
General Information 18
Additional Information 19
Index
5
Congratulations on your new Hegel H120.
All Hegel products are based on a simple philosophy: Add as little as possible. We always
aim to keep the music signal close to the original recording. We are constantly looking for
ways to lower distortion and noise. By lowering noise, we unveil layers of music covered
by noise. And by lowering the distortion we can have a better and more precise reproduc-
tion of the recording. We work hard to give you the best possible music experience. Our
minimalistic Scandinavian design is styled to fit in with any interior. The products are easy
to operate and manufactured according to the best quality principles.
Bent Holter
Founder Hegel Music System
6
What’s In The Box
Amplifier
Accessory Box
Power Cord
User Manual
Remote
Control
7
Quickstart
1. Connect your speakers
For the best audio experience the distance
between the listener and each speaker should
be the same.
8
Quickstart
2. Connect a source
Unbalanced Analog
Balanced Analog
Coaxial Digital
USB Computer
Network streaming
Optical Digital
9
Quickstart
3. Connect the power cord
4. Turn on the amplifier
Power Switch
Unbalanced Inputs Balanced Inputs
Analog 2 Right Left
Analog 1
Left
Right
Line Output
Variable
Speakers Left
Right
Digital Inputs
Optical 2 USBOptical 3Coaxial Optical 1 Network
Amplifier circuit protected by Hegel US Patent No 6.275.104
Apparatet må tilkoples jordet stikkontakt
230VAC Fuse: 4AT
RA
46
H120 Integrated Amplifier,
Hegel, Oslo, Norway
Serial number
10
General Use
Operating the H120
The source and volume can be changed
using the volume and input selector on the
front panel or using the remote control. The
volume level is indicated by a number be-
tween 0 and 99, with 0 being mute level and
99 being max volume. The H120 powers
up at a default volume 20. This value can be
changed, see Special Functions.
Power Button
The H120 amplifier is switched on and off
with the power button located on the under-
side of the amplifier, towards the front of
the unit. When powered up, the H120 takes
a few seconds to calibrate. During this time,
the outputs are muted.
NOTE: When powering up, the outputs are
muted and the volume flashes to indicate
that mute is on. This is normal, and is part
of the start-up procedure.
NOTE: When the H120 has been switched
off, wait 30 seconds before powering it on
again.
Headphone Output
Connect the 6.3mm headphone jack to
the front of the H120. This activates the
headphone volume control and mutes the
speaker outputs.
NOTE: Variable Line Output is still active.
Mute
Pressing the mute button on the Hegel
remote control mutes the outputs on the
amplifier. The volume flashes to
indicate that mute is on. Press the mute
button, or adjust the volume level, to switch
mute off.
Status Indicators
The Hegel H120 will display the network
status in the lower left corner.
Network status is OK:
Network status is not OK:
Andere Handbücher für H120
1
Inhaltsverzeichnis
Andere Hegel Verstärker Handbücher
Hegel
Hegel Rost Bedienungsanleitung
Hegel
Hegel V10 Bedienungsanleitung
Hegel
Hegel H80 Bedienungsanleitung
Hegel
Hegel H70 Bedienungsanleitung
Hegel
Hegel P30A Bedienungsanleitung
Hegel
Hegel H100 Bedienungsanleitung
Hegel
Hegel H200 Bedienungsanleitung
Hegel
Hegel H2A Bedienungsanleitung
Hegel
Hegel H90 Bedienungsanleitung
Hegel
Hegel H95 Bedienungsanleitung
Hegel
Hegel H120 Bedienungsanleitung
Hegel
Hegel C55 Bedienungsanleitung
Hegel
Hegel P4A Bedienungsanleitung
Hegel
Hegel H300 Bedienungsanleitung
Hegel
Hegel H390 Bedienungsanleitung
Hegel
Hegel H1 Bedienungsanleitung
Hegel
Hegel H160 Bedienungsanleitung
Hegel
Hegel H590 Bedienungsanleitung
Hegel
Hegel H190 Bedienungsanleitung
Hegel
Hegel H360 Bedienungsanleitung
