Hellberg SAFE Series Bedienungsanleitung

USER MANUAL

ANSI

GB User manual 8-9 BG  38-39

FR Mode d’emploi 10-11 RO  40-41

ES Instrucciones de uso 12-13 MK  42-43

DE Gebrauchsanweisung 14-15 UA  44-45

NL  16-17 SR  46-47

PT  18-19 EE Kasutusjuhend 48-49

IT  20-21 LV Lietošanas instrukcija 50-51

GR  22-23 LT Naudotojo instrukcijos 52-53

TR  24-25 DK Brugsanvisning 54-55

CZ  26-27 SE Bruksanvisning 56-57

SK Návod na obsluhu 28-29 NO Brukermanual 58-59

PL  30-31 FI Käyttöohje 60-61

HU  32-33 IS Notkunarleiðbeiningar 62-63

SI  34-35 RU  64-65

HR  36-37 SA  66-67

20912-001, 20915-001, 20923-001

EN1731:2006 F

ANSI Z87

Lore

20912

20915

20923

1 3 14

20930-001 20931-001

20933-001 20939-001

2-1,2 HS 1B39

EN 166:2001

ANSI Z87+, CSA Z94.3-2007

Part no. 20930-001

212 13 15 17 1

5-2,5 HS 1B39

EN 166:2001

Part no. 20931-001

212 13 15 17 1

HS 1F3N

EN 166:2001

Part no. 20933-001

212 14 15 18 1

2-1,2 HS 1B39

EN 166:2001

Part no. 20939-001

212 13 15 17 1

2-1,2 HS 1B39N

EN 166:2001

ANSI Z87+, CSA Z94.3-2007

Part no. 20940-001

212 13 15 17 1

918

4-5 HS 1B9

EN 166:2001

Part no. 20942-001

212 13 17

10 1

2-1,2 HS 1B389

EN 166:2001

Part no. 20967-001

212 13 17

20940-001 20942-001

20967-001

SAFE 1 20902-001

SAFE 2 20901-001, 20901-010

SAFE 2 20901-501, 20901-510

SAFE 3 61100-001

SAFE 1 VMC

#20902

EN 166:2001 B

EN 1731:2006 F

SAFE 2

EN 166:2001 39B

EN 1731:2006 F

ANSI Z87+

Part no. 20901-001/20901-010

4313

SAFE 2

EN 166:2001 39B

EN 1731:2006 F

ANSI Z87+

Part no. 20901-501/20901-510

15 17

SAFE 3

EN 166:2001 B

EN 1731:2006 F

ANSI Z87+

Part no. 61100-001

4 3

SAFE 1

SAFE 2

20901-001 20901-501 20901-010 20901-510

SAFE 3

SAFE - FACE PROTECTION

Hereby, Hellberg Safety AB, declares that the face

protection SAFE is in compliance with the PPE

regulation 2016/425 and other appropriate directives



text of the EU declaration of conformity is available

at following internet address: www.hellbergsafety.

com/doc.

Hellbergs SAFE face protection system is intended

to protect the wearers face and eyes from impacts,



accordance with these user instructions. The level

of protection provided is indicated by a marking on

the visor and carrier. Make sure you understand the

marking applied to your product and always conduct a

risk assessment prior to selection.

It is important that the user instructions are followed.

Failure to do so may lead to serious injury.

Test institute: Finnish Institute of Occupational Health

(FIOH), P.O. Box 40 (Topeliuksenkatu 41 B), FI-00251



VISOR STANDARDS

Mesh visors are approved to EN 1731:2006, the

European standard for mesh type eye and face

protection. Solid visors are approved to EN 166:2001,

the European standard for eye and face protection,

and applicable parts of EN 170, EN 171, EN 172.

Other applicable standards

ANSI Z87.1-2003 = American National standard

CSA Z94.3-2007 = Canadian standard

VISOR TECHNICAL DATA

Part no: 20912-001 Steel mesh

Light transmittance: 70%, Length 185 mm, Weight:

52g

Part no: 20915-001 Etched mesh

Light transmittance: 85%, Length 185 mm, Weight:

42g

Part no: 20923-001 Nylon mesh

Light transmittance: 55%, Length 185mm, Weight:

36g

Part no: 20930-001 Polycarbonate clear

Length 200 mm, Thickness: 1 mm, Weight: 74g

Part no: 20931-001 Polycarbonate green

Length 200 mm, Thickness: 1 mm, Weight: 74g

Part no: 20933-001 Acetate clear, anti fog

Length 200 mm, Thickness: 1 mm, Weight: 90g

Part no: 20939-001 Polycarbonate clear chin

protection

Length 220 mm, Thickness: 1 mm, Weight: 110g

Part no: 20940-001 Polycarbonate clear, anti-fog

Length 250 mm, Thickness: 1 mm, Weight: 96g

Part no: 20942-001 Polycarbonate, gold-plated

Length 250 mm, Thickness: 1 mm, Weight: 96g

Part no: 20967-001 Polycarbonate clear

Length 200 mm, Thickness: 1,5 mm,

Weight: 116g

VISOR CARRIERS

20902-001 SAFE 1 carrier

20901-001 SAFE 2 Standard Straight

20901-010 SAFE 2 Standard Low peak

20901-501 SAFE 2 FLEX Straight

20901-510 SAFE 2 FLEX Low peak

61100-001 SAFE 3 carrier

VISOR MARKINGS AND FIELD OF USE

The mesh visors are suitable for applications such

as forestry work and grass/hedge trimming. The solid

visors are suitable for construction work and general

industrial applications.

Further information about recommendation for



manufacturer.

Markings (A)

1. Conformity mark



Safety)

3. European standard

4. American National standard

5. Canadian standard

6. Material of visor frame



8. Date clock

9. 2-1,2: UV scale number (EN 170)

10. 4-5: IR scale number (EN 171)

11. 5-2,5: Sun glare scale number (EN 172)

12. 1: optical rating class

13. B: protection from medium energy impacts

14. F: protection from low energy impacts



16. 8: protection from short circuit electric arc

17. 9: resistance to molten metal droplets and

penetrations of hot solids

18. N: anti fog properties

19. Z87: Basic impact protection

20. Z87+: Basic and High impact protection

21. ANSI warning text

ASSEMBLY INSTRUCTIONS (B)

SAFE 1 - Visor solution for headband style hearing

protectors (B1)

SAFE 2 - Visor solution for safety helmets and hearing

protection (B2)

SAFE 3 - Visor carrier (B3)

The visors can only be used together with Hellberg

visor carriers.

For approved SAFE 2 helmet combinations see our

website: www.hellbergsafety.com/doc

MAINTENANCE

The visor must be washed and cleaned after every

use. Care must be taken to ensure that the visor is not

scratched. It is best to use a mild solution of soap and

water. Wipe with a soft cloth. Avoid hard cloths since

they may scratch the visor. Regular maintenance

and cleaning of the visor guarantees a high level of

wearing comfort. Ensure that the visor is regularly

inspected for serviceability.

STORAGE

The visor must be stored in a dry and clean

environment out of direct sun light, e.g. in its original

packaging.

DURABILITY



outdoors, it is recommended that the visor should



visor may need to be replaced more often in harsch

operating conditions. A visor that has been damaged,

scratched or subjected to impact should be replaced

immediately.

WARNING

• This product is no substitute for safe working

 

• When subject to high speed particles, impacts

may be transmitted when wearing a visor over

standard ophthalmic spectacles, creating a

 

or B is not followed immediately by the letter T,

the visor should only be used against high

speed particles in room temperature.

• The mesh visor does not protect against

  

  

violet radiation. Neither does the visor provide

  

thrown at high speed, e.g. when working with

clearing saws or cut-off machines. We

recommend the use of additional

eye protection (safety glasses) complying with

EN166 or other appropriate directive.

• Do not allow this visor to come into contact

with pointed or sharp objects (chainsaw chain,

metal tools etc.) or aggressive substances

such as aggressive detergents, acids, oils,

solvents, fuels etc.

• Contact with hot objects (exhaust, etc.) and

  

should also be avoided.

• In the event of a combination of products

with different markings, the lowest safety class

marking applies. Visors with symbol 9 (molten

  

marked F or B together with symbol 9. Visors

with symbol 8 (short circuit electric arc) must

 

and have a thickness of 1.4 mm.

• 

protective effect. Therefore, do not modify the

 

it must be disposed of immediately.

• It is important to wear your face protection at all

 

• Material that comes into contact with the skin

may cause allergic reactions to some users.

Further information is available from the manufacturer.

SAFE - PROTECTION FACIALE



la protection faciale SAFE est conforme au règlement EPI

2016/425 et autres directives pertinentes permettant de



de la déclaration UE de conformité est disponible à l’adresse

internet suivante : www.hellbergsafety.com/doc.

Le système de protection faciale SAFE de Hellberg, est



visage et aux yeux, aux éclaboussures et/ou radiations



instructions utilisateur. Le niveau de protection assuré est









instructions. Le non-respect des instructions pourrait





(FIOH), P.O. Box 40 (Topeliuksenkatu 41 B), FI-00251



NORMES APPLICABLES À L’ÉCRAN FACIAL

Les écrans faciaux de type grillage sont approuvée

par la norme européenne 1731:2006 sur les

protections de l'oeil et du visage de type grillage.

Les écrans pleins sont approuvés par la norme

européenne EN 166:2001, pour la protection de l'œil



normes EN 170, EN 171, EN 172.

Autres normes applicables

ANSI Z87.1-2003 = American National standard

(Norme nationale américaine)

CSA Z94.3-2007 = Norme canadienne

CARACTÉRISTIQUES TECHNIQUES DE L’ÉCRAN FACIAL

Référence : 20912-001 Grillage acier

Facteur de transmission lumineuse : 70 %, longueur

185 mm, poids : 52 g

Référence : 20915-001 Grillage gravé

Facteur de transmission lumineuse : 85 %, longueur

185 mm, poids : 42 g

Référence : 20923-001 Grillage nylon

Facteur de transmission lumineuse : 55 %, longueur

185 mm, poids : 36 g

Référence : 20930-001 Polycarbonate incolore

Longueur 200 mm, Épaisseur : 1 mm. Poids : 74 g

Référence : 20931-001 Polycarbonate vert

Longueur 200 mm, Épaisseur : 1 mm. Poids : 74 g

Référence : 20933-001 Acétate incolore, anti-buée

Longueur 200 mm, Épaisseur : 1 mm. Poids : 90 g

Référence : Mentonnière 20939-001 Polycarbonate

incolore

Longueur 220 mm, Épaisseur : 1 mm. Poids : 110 g

Référence : 20940-001 Polycarbonate incolore,

anti-buée

Longueur 250 mm, Épaisseur : 1 mm. Poids : 96 g

Référence : 20942-001 Polycarbonate, plaqué or

Longueur 250 mm, Épaisseur : 1 mm. Poids : 96 g

Référence : 20967-001 Polycarbonate incolore

Longueur 200 mm, Épaisseur : 1,5 mm

Poids : 116 g

PORTE-ÉCRAN

20902-001 porte-écran SAFE 1

20901-001 SAFE 2 Standard droit

20901-010 SAFE 2 Standard pour oreillettes

20901-501 SAFE 2 FLEX droit

20901-510 SAFE 2 FLEX pour oreillettes

61100-001 porte-écran SAFE 3

MARQUAGE DE L’ÉCRAN FACIAL ET DOMAINE

D’UTILISATION

Les écrans faciaux de type grillage sont adaptés



on ou la taille des haies. Les écrans

pleins sont adaptés aux applications industrielles.

Pour de plus amples informations sous la forme de





Marquages (A)





3. Norme européenne

4. Norme nationale américaine

5. Norme canadienne

6. Matériau du cadre de l’écran



8. Date

9. 2-1,2: Indice UV (EN 170)

10. 4-5: Indice infrarouge (EN 171)





13. B : protection contre les impacts d’intensité moyenne

14. B : protection contre les impacts de faible intensité





courts-circuits

17. 9 : résistance aux gouttelettes de métal fondu et à

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hellberg Sicherheitsausrüstung Handbücher

Hellberg

Hellberg SAFE 1 Montageanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung