Henco CU-REGK-24V Bedienungsanleitung
CU-REGK
CU-REGC
DEU
ENG
FRA
NDL
ITA
ESP
Contents
ENG
ENG 26
1 About these instructions ................................................ 27
1.1 Validity, storage and forwarding of the instructions 27
1.2 Symbols 27
2 Safety ............................................................................ 28
2.1 Intended use 28
2.2 General safety notes 28
3 Device overview ............................................................. 30
4 Operation .......................................................................31
4.1 Setting the target temperature 31
4.2 Navigation and settings 31
4.2.1 Lifestyle functions menu 33
4.2.2 Settings menu 37
4.2.3 Service menu 42
5 Comfort and protection functions................................... 45
5.1 Comfort functions 45
5.1.1 Smart Start/Smart Stop function 45
5.1.2 Heating/cooling change-over 45
5.2 Protection functions 45
5.2.1 Valve protection function 45
5.2.2 Antifreeze protection 45
6 Maintenance ..................................................................46
6.1 Troubleshooting 46
6.2 Cleaning 47
DEU
ENG
FRA
NDL
ITA
ESP
1 About these instructions
1.1 Validity, storage and forwarding of the instructions
These instructions apply to the room thermostats of the following
types:
CUREGKV
CUREGKV
CUREGCV
CUREGCV
These instructions include information necessary for the operation
of the devices. The room thermostats are designated as “Standard”,
“Comfort” and “Control” in order to point out dierences between
these types. These instructions must the read completely and thor-
oughly before commencing any work with the devices. These in-
structions must be kept and to be handed over to future users.
1.2 Symbols
The following symbols are used in this manual:
Hazard symbols: Identifies a hazard
Information: Identifies important or useful information
¾User action
9Result from an action
• List without fixed order
1., 2. List with fixed order
DEU
ENG
FRA
NDL
ITA
ESP
The room thermostat controls, directly or via a connection unit,
thermal actuators connected in a room-by-room temperature con-
trol system. It is suitable for 24V or 230V components, depending
on the variant. The unit serves for
• a fixed installation,
• the registration of the actual temperature (room temperature),
• the setting of the target temperature (comfort temperature)
• the control of the actual temperature by activating actuators
in heating/cooling operation (Komfort, Control) in an assigned
zone,
• the connection of an external sensor (CU-REGC-V en CUREGC-
V)
Every other use, modification and conversion is expressively forbid-
den and leads to dangers the manufacturer cannot be held liable for.
All safety notes in these instructions must be observed in order to
avoid accidents with personal damage or property damage.
• Only an authorised electrician may open the device. It may only
be opened in de-energised state.
• Always disconnect from the mains network and secure against
unintended activation before opening.
• Only use the device if it is in flawless state.
• Observe the performance limits of the device and the environ-
mental conditions.
• This device is not intended to be used by persons (including chil-
dren) with restricted physical, sensory or mental skills or who
2 Safety
2.1 Intended use
2.2 General safety notes
DEU
ENG
FRA
NDL
ITA
ESP
lack experience or knowledge. If necessary, these persons must
be supervised by a person responsible for their safety or receive
instructions from this person on how to use this unit.
• Ensure that children do not play with this device. Children must
be monitored if necessary.
• In case of emergency, disconnect the complete room-by-room
temperature control system.
Intended use
DEU
ENG
FRA
NDL
ITA
ESP
3 Device overview
Display
Mo Tu We Th Fr Sa Su
0 6 12 18 24
Rotary control with
turn/press mecha-
nism and fine ratchet
Room thermostats
Symbol Meaning Symbol Meaning
Komfort
Control
Lifestyle functions
menu Temperature unit
Settings menu Target/
actual temp.
Heating Min. temperature
Operating lock Max. temperature
Switching o Make/confirm
entry
Automatic operation Correction of actual
temp. measuring
Day operation Back
Night operation
Service menu Display illum.
Cooling Factory settings
Holiday function Time indications
Time
0 6 12
Comfort programs
Mo Su
Mo Su
Mo Su
Week day Setting the min.floor
temperature1
0 6 12 18 24
Time scale
1Displayed if an external floor sensor is registered.
DEU
ENG
FRA
NDL
ITA
ESP
4 Operation
WARNING
Danger to life in case of swallowing!
The rotary control can be taken o; children might swallow it.
The navigation and settings of the room thermostat are performed
with the rotary control:
+-
The target temperature is set by turning the rotary control
to the left or to the right. Rotating to the left decreases the
temperature, rotating to the right increases it.
By pressing the rotary control, menus are opened and func-
tions are activated, and changed settings are applied.
+-
By rotating the rotary control, settings can be done and
functions and menus can be chosen.
Room thermostats Comfort and Control
Comfort temperatures for day and night operation can be
stored. A manual or automatic change between the oper-
ating modes day and night operation changes to the stored
temperature. The target temperature can be changed with
the rotary control, independent from the active operating
mode. You can find more information in section Lifestyle
functions menu.
4.1 Setting the target temperature
4.2 Navigation and settings
DEU
ENG
FRA
NDL
ITA
ESP
Menu selection
Lifestyle functions
Includes all important basic functions.
Settings
Includes extended functions and numerous setting possi-
bilities.
Service
Includes various system parameters. An optimal tuning of
the overall system can be obtained by corresponding set-
tings.
Back
Leaves the menu selection and returns to the basic level.
The available menus depend on the room thermostat variant.
Basic level
In the basic level, all room thermostats show the current actual tem-
perature as well as active functions. The Control variant additionally
is equipped with a clock function.
A basic level and three menus are available for navigation and set-
tings:
Setting the target temperature
• A selected menu resp. a selected function is displayed
with a flashing symbol.
• If no operation is performed, the display returns to the
basic level after approximately 5 seconds.
DEU
ENG
FRA
NDL
ITA
ESP
4.2.1 Lifestyle functions menu
This menu allows the setting of the lifestyle functions. Depending
on the room thermostat variant, the settings listed in the graphic
are available. The following pages contain detailed information.
• For the selection of an operating mode (day, night, auto-
matic operation) only the inactive modes are available for
selection.
• If no operation is performed, the display returns to the
basic level after approximately 30 seconds.
Komfort and Control
Only Control
+-
DEU
ENG
FRA
NDL
ITA
ESP
Description Steps
Day operation
Adjustment to the set comfort tempera-
turein the menu Settings.
ü Confirm the selection by
pressing.
VDay operation is activated.
VThe basic level is displayed.
Night operation
Adjustment to the set reduction temper-
aturein the Settings menu
ü Confirm the selection by
pressing.
VNight operation is selected.
VThe basic level is displayed.
The symbol flashes if the target
temperature is changed. The tem-
perature change is applied for day
operation. Subsequently, the soft-
ware re-calculates the reduction
temperature for night operation.
.
¾Open the menu selection by pressing.
¾Select the menu Lifestyle functions.
¾Activate the menu by pressing again.
¾Select the desired function.
Lifestyle functions menu
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Henco Thermostat Handbücher
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
