MY21H02 - 12_1.0_19.10.2020 3
Contents
5.3 Commissioning 34
5.4 Preparing the battery 35
5.4.1 Checking the battery 35
5.4.2 Retrofitting the battery locking lever 35
5.4.2.1 Preparing the frame 35
5.4.2.2 Fitting the locking lever 36
5.4.3 Installing the wheel in the Suntour fork 36
5.4.4 Checking the stem and handlebars 37
5.4.4.1 Checking the connections 37
5.4.4.2 Firm hold 37
5.4.4.3 Checking the headset backlash 37
5.5 Pedelec sale 37
6 Operation 38
6.1 Risks and hazards 38
6.2 Personal protective equipment 39
6.3 Tips for a greater range 40
6.4 Error messages 41
6.4.1 Error message display 41
6.5 Instruction and customer service 43
6.6 Adjusting the pedelec 43
6.6.1 Adjusting the saddle 43
6.6.1.1 Adjusting the saddle tilt 43
6.6.1.2 Determining the seat height 43
6.6.1.3 Adjusting the seat height with quick
release 44
6.6.1.4 Adjusting the seat position 44
6.6.2 Adjusting the handlebars 45
6.6.3 Adjusting the stem 45
6.6.3.1 Adjusting the height of the handlebars 45
6.6.3.2 Adjusting the quick release clamping
force 45
6.6.4 Adjusting the brake 45
6.6.4.1 Retracting the brake linings 46
6.6.5 Adjusting the damping sag 46
6.6.5.1 Adjusting the Suntour fork steel
suspension 46
6.6.5.2 Adjusting the Suntour fork air
suspension 47
6.6.6 Adjusting the rebound damping 48
6.6.6.1 Adjusting the Suntour air suspension
fork 49
6.7 Accessories 50
6.7.1 Child seat 50
6.7.2 Trailer 51
6.7.2.1 Trailer approval for Enviolo hub gear 51
6.7.3 Pannier rack 52
6.7.4 Mobile holder 52
6.7.5 Suspension fork coil spring 52
6.7.6 Tubeless and airless 52
6.8 Check list before each ride 53
6.9 Raising the kickstand 54
6.10 Using the pannier rack 54
6.11 Using the saddle 54
6.12 Rechargeable battery 55
6.12.1 Removing the battery 55
6.12.2 Inserting the battery 55
6.12.3 Charging the battery 56
6.12.4 Waking the battery 56
6.13 Electric drive system 57
6.13.1 Switching on the electric drive system 57
6.13.2 Switching off the drive system 57
6.14 On-board computer 58
6.14.1 Switching the on-board computer on 58
6.14.2 Switching off the on-board computer 58
6.14.3 Using the riding light 58
6.14.4 Using the push assist system 59
6.14.5 Selecting the level of assistance 59
6.14.6 Switching the journey information 60
6.14.7 Changing the system information 60
6.14.7.1 Setting background colour 60
6.14.7.2 Setting units 61
6.14.7.3 Adjusts the backlight 61
6.14.7.4 Setting the clock 61
6.14.7.5 Switching the PIN prompt on and off 62
6.14.7.6 Changing the PIN 62
6.14.7.7 Resetting the settings 63
6.15 Brake 64
6.15.1 Using the brake lever 64
6.16 Suspension and damping 65
6.16.1 Suspension fork compression adjuster 65
6.16.1.1 Adjusting the Suntour compression
adjuster 66
6.17 Gear shift 67
6.17.1 Using the derailleur gears 67
6.18 Parking the pedelec 68
7 Cleaning and servicing 69
7.1 Cleaning after each ride 69
7.1.1 Cleaning the suspension fork 69
7.1.2 Cleaning the rear frame damper 69
7.1.3 Cleaning the pedals 69
7.2 Basic cleaning 70
7.2.1 Cleaning the frame 70
7.2.2 Cleaning the stem 70
7.2.3 Cleaning the wheel 70
7.2.4 Cleaning the drive elements 70
7.2.5 Cleaning the rear frame damper 70
7.2.6 Cleaning the chain 71
7.2.7 Cleaning the battery 71
7.2.8 Cleaning the on-board computer 71
7.2.9 Cleaning the motor 71
7.2.10 Cleaning the brake 72
7.3 Servicing 72
7.3.1 Servicing the frame 72
7.3.2 Servicing the stem 72
7.3.3 Servicing the fork 72
