Hi-Target Qstar Series Montageanleitung
Qstar series high precision mobile GIS
product specification instruction
Handbook revision situation
Revision date
Revision times
introduction
2012.8
1
Qstar series high precision
mobile GIS product
introduction V1.0
Preface
Use of the introduction
Welcome to use Qstar series high precision mobile GIS product introduction, this manual applies to
Q star series, this manual introduced how to set and use Qstar series high precision mobile GIS
product.
Specification of the introduction
Qstar series high precision mobile GIS product is a new GPS/GIS data collector, even if you have
used other types of industrial GIS data collector, please carefully read this instruction before use
Experience demand
In order that you can better use Qstar series high precision mobile GIS product, Hi-Target suggests
that you have a certain knowledge of measures or GIS, and carefully read this manual. If you have
any questions, please refer to the official website of Hi-Target: < http://www.hi-target.com.cn >.
Safety technical note
Responsibility absolution
Before you use the product, you should read the introduction carefully. Hi-Target surveying
instrument Co., LTD. will not take the responsibility if you do not operate within the product
instruction。
HI-TARGET surveying instrument Co., LTD. is committed to continuously improve product
function and performance, improve the service quality, and keep the right to change the content of
the instruction without noticing in advance.
We have checked that whether the hardware and software are consistent with the content as the
prints say, but we don't rule out the possibility of bias, the picture in the instruction for reference
only, if you have a product with discrepancies, please refer to the product.
Technology and service
Hi-Target have set up the “technology and service” section in website , if you have
problems you can settle them through the "service guide" telephone 、contacting regional
technology center and headquarters division or through the "experts on the judgment
seat," "technology BBS" message, we will answer your questions as soon as possible.
Note: pay attention to the suggestive content, it is generally special place, need
to draw your special attention, please read it carefully
Warning: the content of the warning is generally very important hints, if not
operate within the warning content , it will cause the damage of instrument,
the loss of data, and the collapse of the system, and even endanger personal
safety.
Related information
You can find the instructions through the following methods:
1 Purchased products from the Hi-Target will with a CD, open the CD and you can find
the instruction;
2 Land the official website of the Hi-Target, through "downloaded zone"—" product
specifications "—" GIS product "and you can it.
Your suggestion
If you have any suggestions and opinions about the introduction, please visit the official
website of the Hi-Target, and leave massage in "technical service" —"advice and
complaint" edition , your feedback will help to improve the quality of the introduction
greatly .
Chapter 1
Products overview
This chapter introduces:
■Product introduction
■Product features
■Matters needing attention in use
Product introduction
Qstar series high precision mobile GIS products are equipped with complete navigation
and position function and GIS data acquisition function, with the operating mode of
physical buttons and touch screen, inputting in both Chinese and English are supported. It
is designed as industrial standard, and can be dropped from 1.5 meters high to the cement
floor without anything, equipped with IP67 level dustproof and waterproof, it can adapt
to complex work environment in the field. At the same time, the configuration of the
large capacity of lithium battery can meet the requirements of all day work.
Qstar series high precision mobile GIS products are integrated designed, and it is
equipped with functions such as GPS, embedded Windows Mobile 6.5 system, digital
camera, microphone, 3 G communications, bluetooth communication, large storage, USB
port, SD card expansion ,etc.
Product features
◊Industrial integration design, with a variety of functions
C H A P T E R
1
◊Can be used as the industrial three proof standard GPS navigation
◊The built-in digital camera, which can realize image information site acquisition,
automatically realize GPS coordinates and image information matching labeling
◊The built-in microphone, it can realize voice information site collected
◊with the function of speech play
◊The built-in bluetooth , to realize the wireless data transmission
◊Integrated industrial 3 G wireless communication. Realizing the communication
between management center and mobile GPS terminal.
Use and the matters needing attention
Although Qstar series high precision mobile GIS products use the corrosion resistance
and impact resistance materials, but the instrument still need our careful use and
maintenance, and keep it in dry environment as far as possible. In order to improve the
stability of the Qstar series high precision mobile GIS products and use cycle, please
avoid Qstar series high precision mobile GIS products exposed to extreme environments ,
such as: damp, high temperature, low temperature, corrosive gas or liquid, etc.
To ensure continuous observation of the satellite and satellite signal quality, the stations
should be set over the open place as far as possible, barriers are not permitted in more
than 15 degree; To reduce the interference of electromagnetic wave to GNSS satellite
signal ,within 200 m strong electromagnetic interference is not permitted, such as TV
tower, microwave station, high voltage transmission line; To avoid or reduce the
happening of the multipath effect, stations should be far away from to the terrain which
reflect electromagnetic wave signal strongly, such as high building, sliced waters, etc.
Warning: Qstar series high precision mobile GIS products must be
preserved and used within stipulated temperature range. Detail
requirements, please refer to chapter 4: technical parameters.
Chapter 2
The introduction of Qstar series high precision
mobile GIS products
The introduction of this chapter:
■the front of Qstar series high precision mobile GIS products
■the back of Qstar series high precision mobile GIS products
■Interface
■touching pen
■battery
■data cable
■belt
This chapter introduces Qstar series high precision mobile GIS products
appearance, interface, battery, touch pen and data cable, etc.
The front of Qstar series high precision mobile GIS products
The front of Qstar series high precision mobile GIS products
，including the touch screen, keyboard, a microphone，protection set ,etc.
C H A P T E R
2
◊Touch screen:3.7 inch vertical screen can do click operation directly, support inputting
in both Chinese and English.
◊Protective set: in case that it grind 、fell and shock, effective to avoid instrument
scratching.
◊Keyboard: direction control, the confirmation button, exit button, switch machine etc.
◊The microphone: built-in microphone can be used for the acquisition of voice
messages.
The back of Qstar series high precision mobile GIS products
The back of Qstar series high precision mobile GIS products
, including the camera, battery, the belt hole, horn, etc.
◊Camera: built-in digital camera for video information site collection
◊Battery: the built-in 3.7 V, 8800 mAh lithium batteries
◊Belt : connect the strap to prevent slide.
◊Horn: instrument real-time operating state and speech broadcast
Interface
Qstar series high precision mobile GIS products interface position is identified, its main
function is charging and data transmission, installing SIM card and SD card, etc.
Picture2-3
◇Charging interface:connect the charger for lithium battery charge.
◇USB interface :the connection computer, used for data transmission.
◇SIM card socket:to install SIM card
◇MicroSD card slot: it can be installed MicroSD card, can support 32 GB at most.
Touching pen
Qstar series high precision mobile GIS products touching pen is equipped with standard
configuration, located in Qstar series high precision mobile GIS products belt .
Note: when the horn is in water, it may appear silent or husky, dry it and it
will be back to normal. The loudspeaker and the instrument is completely
waterproof, horn with water will not affect instrument performance, but please
timely dry it..
Note: when the charging interface and USB interface are not in use, please
cover the stopper, in order to achieve the purpose of waterproof, dustproof.
Picture2-4
Battery
This illustration shows the standard 8800 mAh lithium battery appearance figure.
Picture2-5
Data cable
Picture2-6
◇Qstar series high precision mobile GIS products interface: used in connection of USB
with Qstar series high precision mobile GIS products.
◇USB interface: to connect computer USB port , used for data download.
Notice: In order to protect the environment, when the lithium battery
failure, do not throw them away, please return to Hi-Target or
professional battery recycling units processing.
Warning: when the cable is not in use, it should be packed in where the place
is not easy to squeeze to prevent damage to the plug.
Inhaltsverzeichnis
Andere Hi-Target GPS Handbücher
