HiB Verve 50 Cabinet Bedienungsanleitung

2 &Outside Zone

Thank you for purchasing this HiB product.

FI #02 021 R191118 Ver No. 1.0 Jan 2020

Verve 50, 60 & 80 Cabinet

Before drilling, ensure there are no hidden cables or pipes in the wall. Ensure the domestic electrical

mains supply to which the product is being connected is turned oﬀ for installation.

Please retain this leaﬂet for future reference.

Please read through these instructions carefully and refer back to them during installation to ensure that

your product is ﬁtted safely and that it retains its high quality ﬁnish.

Electrical Safety Information

HiB recommends that all electrical bathroom products must be installed in accordance with current

building and wiring regulations. If in doubt please contact an electrician.

Verve 60 & 80

Art No. 52800 & 52900

Verve 50

Art No. 52700

Installation

WARNING

It is important to follow manufacturer’s installation guidelines to ensure the cabinet is

ﬁxed securely to the wall.

Please use the supplied wall ﬁxing bracket and follow the correct installation method. If

the instructions are not followed appropriately there is an increased safety risk to the user.

NB. Cabinets must be installed with a minimum distance of 150mm between the infra-red sensor

switch and any adjacent wall or object to ensure correct operation of the sensor

1. Position the cabinet in a suitable location (according to the zonal diagram on the back page

(Fig. D) ensuring that the mains supply cable is within reach of the cable connection point of

the cabinet.

2. Carefully mark the desired position of the top of the cabinet on the wall using a so pencil.

3. Remove the cabinet from the wall and using a spirit level, mark a horizontal line 40mm below

the pencil mark. Hold the mounting bracket in place with the holes corresponding with the

marked line. Ensure the bracket is central, and mark the position of the holes (Fig. A).

4. Before drilling, ensure there are no hidden cables or pipes behind the mounting points.

Drill the required holes in the marked positions. If drilling through tile, use a ceramic drill bit.

Insert the wall plugs level with the surface of the wall. If ﬁtting to a tiled surface, wall plugs

should be inserted below the tile surface to avoid cracking. NB. For plasterboard walls,

specialist ﬁxings should be purchased, available from any DIY or hardware store. Fix the

bracket to the wall using the screws provided.

5. Temporarily hang the cabinet on the top bracket (Fig.B), and mark the position of the bottom

mounting hole on the wall using a so pencil, then remove the cabinet from the wall.(Fig. C)

6. Drill a hole in the wall where you have marked with the so pencil. Insert a wall plug level with

the surface of the wall as per step 4.

7. Ensure the domestic electrical mains supply to which the product is being connected is

turned oﬀ. Connect the domestic mains supply according to Fig.E - OVERLEAF.

8. When the product is wired correctly, hang the cabinet on the top bracket (Fig.B) and

secure the cabinet with a screw through the bottom mounting hole (Fig.C). Take care not

to overtighten the screw against the mirror glass, the screw is not load bearing - It is only

intended to prevent the cabinet from moving away from the wall.

9. When the cabinet is correctly ﬁtted, adjust the shelf support brackets to your desired height

ensuring the matching brackets are level. This is done by slightly loosening the screw, do not

remove the screw completely. Once in position tighten screw to secure the bracket and put

the glass shelf into the shelf support bracket.

hib.co.uk 3

(Fig .A)

(Fig .C)

Operating Instruction

To switch on/oﬀ

Slowly move your hand past the sensor located

on the right hand side of the cabinet.

2-Pin charging socket(s) are suitable for

charging and powering electric razors,

trimmers and toothbrushes.

NB. On ﬁrst use of the charger socket, inserting

the plug may prove to be stiﬀ. Reasonable

force may be required to fully insert the plug.

Make sure that the cabinet is held ﬁrmly so that

it is not pushed oﬀ the wall. Aer a few uses,

stiﬀness will ease and the socket will function as

normal.

Sensor

(Fig .B)

To charge a mobile phone

Place a suitable mobile phone with wireless

charging capabilities directly on top of the

wireless phone charging pad. The phone will

indicate that it is receiving charge.

Wireless phone charging pad - Please be

advised not to put metallic items on top of the

wireless charger.

Wireless phone

charging pad

©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and

make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter speciﬁcations as necessary. E & OE.

T: +44 (0)20 8441 0352 F: +44 (0)20 8441 0219 E: sales@hib.co.uk hib.co.uk

Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN

This product is IP44 rated and is suitable for installation in zones: 2 &Outside Zone

All installations must comply

with guidelines which are

based on a zonal concept.

The diagram (Fig. D) illustrates

this concept and must be

followed to ensure the safe

installation of electrical

appliances in the bathroom.

These regulations apply to

domestic installations only.

Installations must be made in

accordance with the current

IEE wiring regulations and

relevant building regulations.

Live

Earth

Neutral

MAINS SUPPLY

LUMINAIRE

Live supply can be Red or Brown

Earth supply is Green and Yellow

Neutral supply can be Blue or Black

Live is Brown

Earth is Green and Yellow

Neutral is Blue

Electrical Safety Information

HiB recommends that all electrical bathroom

products must be installed in accordance with

current building and wiring regulations. If in

doubt please contact an electrician. Ensure

mains power supply is switched oﬀ before

starting installation.

USB Socket - If an appliance is connected and

the current draw exceeds 1.5A, the USB driver

will automatically go into protective shutdown

mode and the LED light on the USB socket will

ﬂash. Disconnecting the appliance will reset

the USB driver.

Any appliance that requires more than the

1.5A current should not be used in the USB

socket

Wireless phone charging pad - Please be

advised not to put metallic items on top of the

wireless charger.

(Fig.D)

Care Instructions

Do not use abrasives or solvents when

cleaning this product.

Wipe oﬀ all water spillages as soon as possible

using a so, damp cloth.

Aercare Service

In the unlikely event that this product should

fail please contact HiB customer services,

contact details shown below.

Wiring Diagram (Fig.E)

WEEE compliance

Must not be mixed with

general household waste

Dieses Handbuch passt für folgende Modelle

Andere HiB Inneneinrichtung Handbücher

HiB

HiB NOVUM Camber Bedienungsanleitung

HiB

HiB Groove 50 Bedienungsanleitung

HiB

HiB Vanquish 50 Bedienungsanleitung

HiB

HiB Edge 50 Bedienungsanleitung

HiB

HiB novum Bedienungsanleitung

HiB

HiB Essence 50 Bedienungsanleitung

HiB

HiB Dusk 50 Bedienungsanleitung

HiB

HiB 21700 Handbuch

HiB

HiB Connect Series Bedienungsanleitung

HiB

HiB Trim Curve 40 Bedienungsanleitung

HiB

HiB Novum Duet Bedienungsanleitung

HiB

HiB Qubic 50 Bedienungsanleitung

HiB

HiB Novum N18DU60MWH Bedienungsanleitung

HiB

HiB NOVUM N19FS50MBL Bedienungsanleitung

HiB

HiB Paragon 50 Bedienerhandbuch

HiB

HiB Vanquish 50 Bedienungsanleitung

HiB

HiB Novum N19FSCLMBL Bedienungsanleitung

HiB

HiB novum Prima Bedienungsanleitung

HiB

HiB austin 9101900 Handbuch

HiB

HiB Novum Aeon Bedienungsanleitung

HiB

HiB 54500 Bedienungsanleitung

HiB

HiB Arcane Curve 50 Black 79500100 Bedienungsanleitung

HiB

HiB Vogue Bedienungsanleitung

HiB

HiB novum N19WH50MBL Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung