High Zone BT86 Bedienungsanleitung
BluetoothHeadphone
BT86
UserManual
SPECIFICATIONS
Bluetoothversion:BluetoothV3.0+EDR
Support:HFPV1.5,A2DPV1.2,AVRCPV1.4,HSP1.2,GAVDP1.2,IOP
SNR:96dBSNRstereoADCandstereoDAC
Sensitivity:-80dBm<0.1%BER
Transmissiondistance:10m
Frequency:2.402-2.480GHZ
Transmissionpower:CLASS2,4dbm
AudioSNR: ≥75dB
Audioperformance:SBCdecoding
Batterycapacity:3.7V/300mAHL
Chargingvoltage:DC5V
Chargingtime:about1hour
Workingcurrency: ≤40mA
Standbycurrency:<500uA
Workingtemperature:-40ºCto+85ºC
Playtime:about7hours
Workingtime:about8hours
Standbytime:about400hours
OPERATIONGUIDE
PowerOn:Longpress for2seconds,voicepromptPowerOn”.
PowerOff：Longpress for2seconds,voiceprompt“PowerOff”.
Answer/HangupCalls:Singlepress
Re-dialLastPhoneCall:Doublepress
Play/PauseMusic:Singlepress
Volume+/-:Longpress /
Previous/NextSong:Singlepress /
Aux-in:Theheadsetwillswitchtowiredmodeautomaticallyonceinsert
theaudiocabletotheAux-inportandaudiodevice,noneedpower.
PARING
1. InitialPairing:Bluetoothheadsetwillenterpairingmode
automatically,voiceprompts“Pairing”.TurnonBluetoothfunctionon
deviceandselectBT86,noPINcodeneeded.Voiceprompts
“connected” whenpairingsuccessfully.
2.Re-Pairing:Longpress forabout2secondsinpoweroffmode,
headsetenterpairingmodewhenredandblueLEDindicatorlights
flashquickly.
3.Bluetoothheadsetwillpairingconnecteddeviceautomaticallywhen
poweron.
LEDINDICATORLIGHT
1.Charging:Redlightkeepsoninchargingmode,bluelightonwhen
fullycharged.
2.Poweron:Bluelightflashfor1time.
3.Pairingmode:Redandbluelightsflashingalternately.
4.Pairedmode:Bluelightflashevery1.5seconds.
5.Standbymode:Bluelightflashevery1.5seconds.
6.Playmode:Bluelightflashevery1.5seconds.
7.Poweroff:Redlightkeepsonfor3seconds.
ATTENTION
1. Theportatthebuttonofheadsetisforaudioinputonly,pleaseDO
NOTconnectotherheadphones.
2. PleasechargetheBluetoothheadsetwhenvoiceprompts “Battery
Low”.
3. Topreventpossiblehearingdamage,donotlistenathighvolume
levelsforlongperiods.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Inhaltsverzeichnis
Andere High Zone Kopfhörer Handbücher
